2020-11-23 15:43:46

by Ioana Ciornei

[permalink] [raw]
Subject: [PATCH net-next 06/15] net: phy: meson-gxl: remove the use of .ack_callback()

From: Ioana Ciornei <[email protected]>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Jerome Brunet <[email protected]>
Cc: Neil Armstrong <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
---
drivers/net/phy/meson-gxl.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index b16b1cc89165..7e7904fee1d9 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -204,22 +204,27 @@ static int meson_gxl_config_intr(struct phy_device *phydev)
int ret;

if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ /* Ack any pending IRQ */
+ ret = meson_gxl_ack_interrupt(phydev);
+ if (ret)
+ return ret;
+
val = INTSRC_ANEG_PR
| INTSRC_PARALLEL_FAULT
| INTSRC_ANEG_LP_ACK
| INTSRC_LINK_DOWN
| INTSRC_REMOTE_FAULT
| INTSRC_ANEG_COMPLETE;
+ ret = phy_write(phydev, INTSRC_MASK, val);
} else {
val = 0;
- }
+ ret = phy_write(phydev, INTSRC_MASK, val);

- /* Ack any pending IRQ */
- ret = meson_gxl_ack_interrupt(phydev);
- if (ret)
- return ret;
+ /* Ack any pending IRQ */
+ ret = meson_gxl_ack_interrupt(phydev);
+ }

- return phy_write(phydev, INTSRC_MASK, val);
+ return ret;
}

static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
@@ -249,7 +254,6 @@ static struct phy_driver meson_gxl_phy[] = {
.soft_reset = genphy_soft_reset,
.config_init = meson_gxl_config_init,
.read_status = meson_gxl_read_status,
- .ack_interrupt = meson_gxl_ack_interrupt,
.config_intr = meson_gxl_config_intr,
.handle_interrupt = meson_gxl_handle_interrupt,
.suspend = genphy_suspend,
@@ -260,7 +264,6 @@ static struct phy_driver meson_gxl_phy[] = {
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
.soft_reset = genphy_soft_reset,
- .ack_interrupt = meson_gxl_ack_interrupt,
.config_intr = meson_gxl_config_intr,
.handle_interrupt = meson_gxl_handle_interrupt,
.suspend = genphy_suspend,
--
2.28.0


2020-11-26 11:07:23

by Jerome Brunet

[permalink] [raw]
Subject: Re: [PATCH net-next 06/15] net: phy: meson-gxl: remove the use of .ack_callback()


On Mon 23 Nov 2020 at 16:38, Ioana Ciornei <[email protected]> wrote:

> From: Ioana Ciornei <[email protected]>
>
> In preparation of removing the .ack_interrupt() callback, we must replace
> its occurrences (aka phy_clear_interrupt), from the 2 places where it is
> called from (phy_enable_interrupts and phy_disable_interrupts), with
> equivalent functionality.
>
> This means that clearing interrupts now becomes something that the PHY
> driver is responsible of doing, before enabling interrupts and after
> clearing them. Make this driver follow the new contract.
>
> Cc: Jerome Brunet <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Signed-off-by: Ioana Ciornei <[email protected]>
> ---
> drivers/net/phy/meson-gxl.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index b16b1cc89165..7e7904fee1d9 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -204,22 +204,27 @@ static int meson_gxl_config_intr(struct phy_device *phydev)
> int ret;
>
> if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
> + /* Ack any pending IRQ */
> + ret = meson_gxl_ack_interrupt(phydev);
> + if (ret)
> + return ret;
> +
> val = INTSRC_ANEG_PR
> | INTSRC_PARALLEL_FAULT
> | INTSRC_ANEG_LP_ACK
> | INTSRC_LINK_DOWN
> | INTSRC_REMOTE_FAULT
> | INTSRC_ANEG_COMPLETE;
> + ret = phy_write(phydev, INTSRC_MASK, val);
> } else {
> val = 0;
> - }
> + ret = phy_write(phydev, INTSRC_MASK, val);
>
> - /* Ack any pending IRQ */
> - ret = meson_gxl_ack_interrupt(phydev);
> - if (ret)
> - return ret;
> + /* Ack any pending IRQ */
> + ret = meson_gxl_ack_interrupt(phydev);
> + }
>
> - return phy_write(phydev, INTSRC_MASK, val);
> + return ret;

The only thing the above does is clear the irq *after* writing INTSRC_MASK
*only* when the interrupts are not enabled. If that was not the intent,
please let me know.

As it stands, I don't think this hunk is necessary and I would prefer if
it was not included.

> }
>
> static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
> @@ -249,7 +254,6 @@ static struct phy_driver meson_gxl_phy[] = {
> .soft_reset = genphy_soft_reset,
> .config_init = meson_gxl_config_init,
> .read_status = meson_gxl_read_status,
> - .ack_interrupt = meson_gxl_ack_interrupt,
> .config_intr = meson_gxl_config_intr,
> .handle_interrupt = meson_gxl_handle_interrupt,
> .suspend = genphy_suspend,
> @@ -260,7 +264,6 @@ static struct phy_driver meson_gxl_phy[] = {
> /* PHY_BASIC_FEATURES */
> .flags = PHY_IS_INTERNAL,
> .soft_reset = genphy_soft_reset,
> - .ack_interrupt = meson_gxl_ack_interrupt,
> .config_intr = meson_gxl_config_intr,
> .handle_interrupt = meson_gxl_handle_interrupt,
> .suspend = genphy_suspend,