LinuxLists.cc - PROBLEM: USB (MS Intellimouse specifically) does not work with SMP Linux 2.2.18.

2000-12-12 14:45:15

Subject: PROBLEM: USB (MS Intellimouse specifically) does not work with SMP Linux 2.2.18.

[1.] One line summary of the problem:
USB (MS Intellimouse specifically) does not work with SMP kernel 2.2.18.

[2.] Full description of the problem/report:
When trying to install a Microsoft Intellimouse Explorer (USB)
to a SMP kernel, I get the following error multiple times:

usb.c: USB device not accepting new address (error=-110)

If USB is compiled in, then it happens several times during the
boot sequence.

Everything works fine on a single-processor kernel. I have tried
installing all of USB as modules, and I have tried compiling it
into the kernel with no change.

System is a MSI 694D-Pro AR motherboard (Via 694X chipset)
Dual 500 Mhz Celeron processors, 500 Mhz (Not overclocked)
Microsoft Intellimouse explorer.

I suspect that it is an issue where locking is required,
but none currently exists, either in mousedev, usb, or
uhci. (Great logic--those are the main modules that should
be in use.) I suspect that the problem can be duplicated
on my system under Linux 2.4.0-test11, but, alas, I cannot
get linux 2.4 to boot right now.

I don't see the hid module in the status output like I do on
the uni-processor kernel. Maybe those structures need locks.

[3.] Keywords (i.e., modules, networking, kernel):
USB, mousedev, hid, input, mouse, intellimouse, linux-2.2.18

[4.] Kernel version (from /proc/version):
Linux 2.2.18

[5.] [6.] N/A
I can reproduce it with the current kernel every time.

[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Slackware 7.1 + Linux 2.2.18

[7.2.] Processor information (from /proc/cpuinfo):
Below.

[7.3.] Module information (from /proc/modules):
Below

[7.4.] SCSI information (from /proc/scsi/scsi)
Not Applicable.

[7.5.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:

#/proc/version
Linux version 2.2.18 (root@darkstar) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 SMP Mon Dec 11 23:32:12 GMT 2000

#/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 501.148
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr
bogomips : 999.42

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 501.148
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr
bogomips : 999.42

#/proc/modules
mousedev 3916 0 (unused)
input 2780 0 [mousedev]
uhci 19100 0 (unused)
usbcore 49256 1 [uhci]

#/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies Unknown device (rev 196).
Vendor id=1106. Device id=691.
Medium devsel. Master Capable. No bursts.
Prefetchable 32 bit memory at 0xd0000000 [0xd0000008].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies VT 82C598 Apollo MVP3 AGP (rev 0).
Medium devsel. Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies Unknown device (rev 34).
Vendor id=1106. Device id=686.
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 16).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=32.
I/O at 0xc000 [0xc001].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 16).
Medium devsel. IRQ 19. Master Capable. Latency=32.
I/O at 0xc400 [0xc401].
Bus 0, device 7, function 3:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 16).
Medium devsel. IRQ 19. Master Capable. Latency=32.
I/O at 0xc800 [0xc801].
Bus 0, device 7, function 4:
Host bridge: VIA Technologies Unknown device (rev 48).
Vendor id=1106. Device id=3057.
Medium devsel. Fast back-to-back capable.
Bus 0, device 7, function 5:
Multimedia audio controller: VIA Technologies Unknown device (rev 32).
Vendor id=1106. Device id=3058.
Medium devsel. IRQ 18.
I/O at 0xcc00 [0xcc01].
I/O at 0xd000 [0xd001].
I/O at 0xd400 [0xd401].
Bus 0, device 12, function 0:
RAID storage controller: Promise Technology Unknown device (rev 2).
Vendor id=105a. Device id=d30.
Medium devsel. IRQ 18. Master Capable. Latency=32.
I/O at 0xd800 [0xd801].
I/O at 0xdc00 [0xdc01].
I/O at 0xe000 [0xe001].
I/O at 0xe400 [0xe401].
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xd9000000 [0xd9000000].
Bus 0, device 14, function 0:
Communication controller: Unknown vendor Unknown device (rev 8).
Vendor id=14f1. Device id=1035.
Medium devsel. Fast back-to-back capable. IRQ 16. Master Capable.
Latency=32.
Non-prefetchable 32 bit memory at 0xd9020000 [0xd9020000].
I/O at 0xec00 [0xec01].
Bus 0, device 15, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 3).
Vendor id=1073. Device id=d.
Medium devsel. IRQ 17. Master Capable. Latency=32. Min Gnt=5.Max
Lat=25.
Non-prefetchable 32 bit memory at 0xd9030000 [0xd9030000].
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 17).
Vendor id=10de. Device id=28.
Medium devsel. Fast back-to-back capable. IRQ 16. Master Capable.
Latency=32. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xd6000000 [0xd6000000].
Prefetchable 32 bit memory at 0xd4000000 [0xd4000008].

#/proc/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

2000-12-12 18:02:24

by Johannes Erdfelt

[permalink] [raw]

Subject: Re: [linux-usb-devel] PROBLEM: USB (MS Intellimouse specifically) does not work with SMP Linux 2.2.18.

On Tue, Dec 12, 2000, Laramie Leavitt <[email protected]> wrote:
> [1.] One line summary of the problem:
> USB (MS Intellimouse specifically) does not work with SMP kernel 2.2.18.
>
> [2.] Full description of the problem/report:
> When trying to install a Microsoft Intellimouse Explorer (USB)
> to a SMP kernel, I get the following error multiple times:
>
> usb.c: USB device not accepting new address (error=-110)
>
> If USB is compiled in, then it happens several times during the
> boot sequence.
>
> Everything works fine on a single-processor kernel. I have tried
> installing all of USB as modules, and I have tried compiling it
> into the kernel with no change.
>
> System is a MSI 694D-Pro AR motherboard (Via 694X chipset)
> Dual 500 Mhz Celeron processors, 500 Mhz (Not overclocked)
> Microsoft Intellimouse explorer.
>
> I suspect that it is an issue where locking is required,
> but none currently exists, either in mousedev, usb, or
> uhci. (Great logic--those are the main modules that should
> be in use.) I suspect that the problem can be duplicated
> on my system under Linux 2.4.0-test11, but, alas, I cannot
> get linux 2.4 to boot right now.
>
> I don't see the hid module in the status output like I do on
> the uni-processor kernel. Maybe those structures need locks.

Unlikely. Many people use that particular mouse with your particular HCD
in SMP every day. Like myself. In fact I am right now, using 2.2.18.

What is more likely the cause is an IRQ routing problem.

Can you check /proc/interrupts and see if the interrupt count is going
up?

Also, can you check your BIOS and see if it is configured for MPS 1.4?
If so, change it to MPS 1.1.

JE

2000-12-12 19:40:45

by Stephen J. Gowdy

[permalink] [raw]

Subject: Re: [linux-usb-devel] PROBLEM: USB (MS Intellimouse specifically) does not work with SMP Linux 2.2.18.