I sent a similar message earlier, but it has not shown up on
linux-kernel so I guess something went wrong...
I am starting to have problems again with the Cardbus controller
somewhere inbetween 2.4.0-test10 (works) and 2.4.0-test13-pre2 (fails).
The problem shows as follows: When I boot the kernel (I have PCMCIA
compiled in) only one of my cards gets detected due to the following
error:
cs: socket c5feb800 timed out during reset. Try increasing setup_delay.
cs: socket c5fb5000 voltage interrogation timed out
I did not have see this error before and increasing setup_delay manually
in the source did not help.
Now when I do "cardctl eject; cardctl insert" things work out fine.
I am not sure if this is somehow related to the problems that were
fixed with test5pre6, but the sumptoms are kind of similar (one slot
works - other does not).
If you want me to try something please let me know.
Jens
ps: attached please find the dmesg output.
--
Jens Taprogge