Hi!
root@tilde:~# lsmod
Module Size Used by
root@tilde:~# lsmod
Module Size Used by
root@tilde:~# insmod airo
Using /lib/modules/2.4.1-ac7/pcmcia/airo.o
root@tilde:~# lsmod
Module Size Used by
airo 25232 0 (unused)
root@tilde:~# cat /proc/driver/aironet/eth1/Config
Segmentation fault
root@tilde:~# uname -a
Linux tilde 2.4.1-ac7 #1 Fri Feb 9 01:02:00 CET 2001 i586 unknown
airo is a module for the cisco aironet wireless network cards. I have a
pcmcia 342, and a pci 342 (which just looks like a pcmcia card mounted
on a pci board). The pcmcia cards in my notebook seemes to work ok
(can't test, but the /proc interface works fine and the card reacts on
that), but the pci in my pc gives the above problem. Also tried -ac5.
/var/log/syslog only says:
Feb 9 01:52:52 tilde kernel: airo: Probing for PCI adapters
Feb 9 01:52:52 tilde kernel: airo: Doing fast bap_reads
Feb 9 01:52:52 tilde kernel: airo: MAC enabled eth1 0:40:96:45:be:e6
Feb 9 01:52:52 tilde kernel: airo: Finished probing for PCI adapters
Feb 9 01:53:05 tilde kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000034
Feb 9 01:53:05 tilde kernel: printing eip:
Feb 9 01:53:05 tilde kernel: c48ec688
Feb 9 01:53:05 tilde kernel: *pde = 00000000
Feb 9 01:53:05 tilde kernel: Oops: 0000
Feb 9 01:53:05 tilde kernel: CPU: 0
The system sometimes seemes to be fine after this, and sometimes it
freezes. The nic doesn't work.
What can I do to provide more info?
Ookhoi