----- Forwarded message from [email protected] -----
Date: Thu, 15 Feb 2001 21:40:28 +0100
From: [email protected]
To: [email protected]
Subject: USB mass storage and USB message
I'm using the usb-uhci core with the 8200e storage drivers. I don't why
the kernel logs the next message:
uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
(well a lot of them)
The kernel is 2.4.1, the hardware a Celeron 566 with a VIA chipset, with the
next cat /proc/pci
This doesn't hapeng with the uhci module.
I was testing the cd writer with cdrecord at x1 speed( well, at least it can
finish th simulation, because with the pre series, it can finished).
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 5).
> Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
> Bus 0, device 1, function 0:
> PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (rev 0).
> Master Capable. No bursts. Min Gnt=12.
> Bus 0, device 7, function 0:
> ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 27).
> Bus 0, device 7, function 1:
> IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
> Master Capable. Latency=64.
> I/O at 0x1420 [0x142f].
> Bus 0, device 7, function 2:
> USB Controller: VIA Technologies, Inc. UHCI USB (rev 14).
> IRQ 11.
> Master Capable. Latency=64.
> I/O at 0x1400 [0x141f].
> Bus 0, device 7, function 4:
> ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 32).
> Bus 0, device 7, function 5:
> Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 33).
> IRQ 9.
> I/O at 0x1000 [0x10ff].
> I/O at 0x1434 [0x1437].
> I/O at 0x1430 [0x1433].
> Bus 0, device 9, function 0:
> Communication controller: CONEXANT HSP MicroModem 56K (rev 1).
> IRQ 11.
> Master Capable. Latency=64.
> Non-prefetchable 32 bit memory at 0xf4000000 [0xf400ffff].
> I/O at 0x1438 [0x143f].
> Bus 0, device 10, function 0:
> CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 1).
> IRQ 9.
> Master Capable. Latency=168. Min Gnt=192.Max Lat=5.
> Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
> Bus 1, device 0, function 0:
> VGA compatible controller: Trident Microsystems CyberBlade i1 (rev 106).
> IRQ 9.
> Master Capable. Latency=64.
> Non-prefetchable 32 bit memory at 0xf5000000 [0xf57fffff].
> Non-prefetchable 32 bit memory at 0xf4100000 [0xf411ffff].
> Non-prefetchable 32 bit memory at 0xf4800000 [0xf4ffffff].
>
Saludos
Carlos
PD: It's possible don't use the DUL list to blackmail SPAM sites. I usually
use my loca smtp, because a don't trust the smtp of my ISP ( and nethier in
Spain, swith doesn't it a option :( )
--
... Windows 95: Emulador de Spectrum para PII.
____________________________________________________________________________
Drizzt Do'Urden Three rings for the Elves Kings under the Sky
[email protected] Seven for the Dwarf_lords in their
hall of stone
Nine for the Mortal Men doomed to die
----- End forwarded message -----
--
... Castillos no hay muchos, pero fantasmas por todas partes.
____________________________________________________________________________
Drizzt Do'Urden Three rings for the Elves Kings under the Sky
[email protected] Seven for the Dwarf_lords in their
hall of stone
Nine for the Mortal Men doomed to die
On Thu, Feb 15, 2001, [email protected] <[email protected]> wrote:
> I'm using the usb-uhci core with the 8200e storage drivers. I don't why
> the kernel logs the next message:
>
> uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
> uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
> uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
> uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
> uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
> uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
> (well a lot of them)
If it says, uhci.c, then it would be uhci.o. If it says usb-uhci.c, then
it's usb-uhci.o. Your statement conflicts with the log you pasted. Which
one is it?
> The kernel is 2.4.1, the hardware a Celeron 566 with a VIA chipset, with the
> next cat /proc/pci
>
> This doesn't hapeng with the uhci module.
>
> I was testing the cd writer with cdrecord at x1 speed( well, at least it can
> finish th simulation, because with the pre series, it can finished).
Did you get an oops? Is the khubd process zombied?
JE