Note as stated in the FAQ: I am not subscribed, so please CC also to me,
when answering. (Or else my spies have to do this. :) )
Mahlzeit
I have been told, that I might get help here. I have a Sony VAIO C1Vx.
(In my case x=E.) My problem is the power management, i.e. standby and
suspend. I was not able to get it working (properly). Is here someone
who got it working or knows, that it will not work?
My tries so far:
2.4.2 with APM:
- Fn+Fxx does nothing.
- standby makes the display black, but switches not the backlights off.
The only way to go back to normal is by switching to a text console
and then back to X.
- suspend is done properly, but to only way to get back to normal is
by switching the computer off and then boot again.
2.2.16 with APM:
- Same as above.
2.4.2 with ACPI:
- I have compiled 2.4.2 with ACPI and without APM. acpid is started.
- Fn-Fxx does hang the display and probably computer until a few seconds
after pressing a key or mouse button.
- Don't know no other way of going into suspend or standby with ACPI.
2.4.2-ac3 with ACPI:
- Same as above, but Fn-Fxx does nothing.
So do I wasting here my time or is it possible to get standby/suspend
working with the C1Vx? Has somebody got it working with APM or ACPI?
Some pointers or even a detailed description?
Thanks all
endergone Zwiebeltuete
PS: I have installed Red Hat 7.0 (aka Little Red Ridinghood).
--
live free or die
Matthias Bruestle writes:
> Note as stated in the FAQ: I am not subscribed, so please CC also to me,
> when answering. (Or else my spies have to do this. :) )
>
> Mahlzeit
>
>
> I have been told, that I might get help here. I have a Sony VAIO C1Vx.
> (In my case x=E.) My problem is the power management, i.e. standby and
> suspend. I was not able to get it working (properly). Is here someone
> who got it working or knows, that it will not work?
Try Gvaiocontrols for screen brightness (the volume control doesn't
work yet).
http://gvaiocontrols.serialhacker.net/
--
Drew Bertola | Send a text message to my pager or cell ...
| http://jpager.com/Drew
> > Note as stated in the FAQ: I am not subscribed, so please CC also to me,
> > when answering. (Or else my spies have to do this. :) )
Mahlzeit
On Sun, Feb 25, 2001 at 08:07:02PM +0000, Drew Bertola wrote:
> Try Gvaiocontrols for screen brightness (the volume control doesn't
> work yet).
That works. There is also the commandline utility setbrightness.
This works too, but my problem is standby and suspend.
Thanks
endergone Zwiebeltuete
--
live free or die
Note as stated in the FAQ: I am not subscribed, so please CC also to me,
when answering. (Or else my spies have to do this. :) )
Mahlzeit
I played a bit around more. /proc/sys/acpi looks good. The disassembled
output of FAC{SP} and DSDT o.s.l.t. looks "meaningfull". But I cannot
see any events in /proc/sys/acpi/event. (This is with 2.4.2-ac3.)
Thanks
endergone Zwiebeltuete
--
live free or die
Hi!
I have a C1VJ.
> Note as stated in the FAQ: I am not subscribed, so please CC also to me,
> when answering. (Or else my spies have to do this. :) )
>
> Mahlzeit
>
>
> I have been told, that I might get help here. I have a Sony VAIO C1Vx.
> (In my case x=E.) My problem is the power management, i.e. standby and
> suspend. I was not able to get it working (properly). Is here someone
> who got it working or knows, that it will not work?
>
> My tries so far:
>
> 2.4.2 with APM:
>
> - Fn+Fxx does nothing.
I think ... This <Fn+Fxx> keys controled by SPIC(Sony Programmable I/O Control Device).
Download a picturebook application from
http://samba.org/picturebook/
and make it.
and check with this command...
# capture -j
then press <Fn+Fxx> keys. May be you can see the press event...
Here is a event data...
<Fn+ESC> : event 0x10 0x29 & event 0x10 0x28
<Fn+F1> : event 0x11 ------ same -----
<Fn+F2> : 0x12
: : <F3> -> <F11> : 0x13 -> 0x1b
<Fn+F12> : 0x1c
<Fn+"1"> : 0x21
<Fn+"2"> : 0x22
<Fn+"B"> : 0x35
<Fn+"F"> : 0x33
<Fn+"E"> : 0x32
<Fn+"S"> : 0x34
<Fn+"D"> : 0x31
> - standby makes the display black, but switches not the backlights off.
> The only way to go back to normal is by switching to a text console
> and then back to X.
Recompile the your Kernel with "Enable console blanking using APM" option.
then the backlights off.(only text console)
I checked Kernel 2.2.17,2.2.18 & 2.4.2
> - suspend is done properly, but to only way to get back to normal is
> by switching the computer off and then boot again.
>
> 2.2.16 with APM:
>
> - Same as above.
Same...
but. My case is .... Wake up the CPU-FAN & IDE-LED ???
> 2.4.2 with ACPI:
>
> - I have compiled 2.4.2 with ACPI and without APM. acpid is started.
> - Fn-Fxx does hang the display and probably computer until a few seconds
> after pressing a key or mouse button.
> - Don't know no other way of going into suspend or standby with ACPI.
>
> 2.4.2-ac3 with ACPI:
>
> - Same as above, but Fn-Fxx does nothing.
>
> So do I wasting here my time or is it possible to get standby/suspend
> working with the C1Vx? Has somebody got it working with APM or ACPI?
> Some pointers or even a detailed description?
>
My VAIO could(can) go into suspend mode....but never wakeup.
as same as APM case.
>
> Thanks all
>
> endergone Zwiebeltuete
>
> PS: I have installed Red Hat 7.0 (aka Little Red Ridinghood).
>
> --
> live free or die
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
addition....
You can use the internal USB-Memory-Stick device with Kernel 2.2.18 and usb-storage module. and the sound module is ymfpci.
take care about ymfpci module... because, some time I get a NOISE!!!
in this case just shutdown(not reboot!).
Thanks
--
Junichi Morita
[email protected]
Mahlzeit
On Tue, Feb 27, 2001 at 01:48:26AM +0900, Junichi Morita wrote:
> I think ... This <Fn+Fxx> keys controled by SPIC(Sony Programmable I/O Control Device).
> Download a picturebook application from
> http://samba.org/picturebook/
> and make it.
Done.
> and check with this command...
> # capture -j
> then press <Fn+Fxx> keys. May be you can see the press event...
> Here is a event data...
> <Fn+ESC> : event 0x10 0x29 & event 0x10 0x28
> <Fn+F1> : event 0x11 ------ same -----
> <Fn+F2> : 0x12
> : : <F3> -> <F11> : 0x13 -> 0x1b
Works, but it seams a bit flakey. Sometimes I get 0xXX 0x29 and 0xXX 0x28
and sometimes only 0xXX 0x28. The "jog dial" is even more flakey. This
has the third variation of no events at all.
> > - standby makes the display black, but switches not the backlights off.
> > The only way to go back to normal is by switching to a text console
> > and then back to X.
> Recompile the your Kernel with "Enable console blanking using APM" option.
> then the backlights off.(only text console)
> I checked Kernel 2.2.17,2.2.18 & 2.4.2
The C1Vx does support as I have now heard in principle no APM, so I
would have to use ACPI. If I want to use ACPI I cannot compile in APM,
else it tries to use APM. A way to switch of the backlights, which
works very reliable, is shuting the notebook. :)
> My VAIO could(can) go into suspend mode....but never wakeup.
> as same as APM case.
I seams every C1Vx does other things.
> You can use the internal USB-Memory-Stick device with Kernel 2.2.18 and usb-storage module.
"modprobe usb-storage" does dectect the floppy, does detect the memory
stick (prorietary crap) and hangs then forever. (With 2.4.2 and 2.4.2-ac3)
> and the sound module is ymfpci.
> take care about ymfpci module... because, some time I get a NOISE!!!
I had this also, the I installed the ALSA driver and no problems again
with it.
Mahlzeit
endergone Zwiebeltuete
--
live free or die