Hi,
While attempting to use pci=biosirq kernel parameter in 2.4.3pre6 (same
observed with ac20) I've got the following oops (manually rewritten) during
3c59x network adapter (compiled into kernel) initialization:
Unable to handle kernel paging request at virtual address 0000dde5
printing eip:
c00fde03
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c00fde03>]
EFLAGS: 00010292
eax: 00000009 ebx: 0000dde5 ecx: 00000c0a edx: c1170cc9
esi: c02964f0 edi: 00000000 ebp: 00000000 esp: c1177e92
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c1177000)
Stack: 00000cc9 64f00000 0000c029 7eb40000 0030c117 def80000 0c0ac117 0cc90000
deba0000 0000c00f 64f00000 0000c029 7ed80000 0030c117 0c010000 0c0ac117
b10c0000 dd410000 b10fc00f 0c0a0c00 c00fdba2 eecc0206 0010c010 000c0000
Call Trace: [<def80000>] [<deba0000>] [<dd410000>] [<eecc0206>] [<f32f0000>] [<f523c117>] [<def8c029>]
[and long, probably infinite trace here...]
Unfortunately ksymoops tracing gives no effect as the problem seems to
appear in a BIOS call. Some printk() debugging shows trace:
vortex_init()
...
vortex_init_one() [ drivers/net/3c59x.c ]
pci_enable_device() [ drivers/pci/pci.c ]
pcibios_enable_device() [ arch/i386/kernel/pci-pc.c ]
pcibios_enable_irq() [ arch/i386/kernel/pci-irq.c ]
pcibios_lookup_irq() [ arch/i386/kernel/pci-irq.c ]
[ pci-irq.c:555: r->set(pirq_router_dev, dev, pirq, newirq) ]
pirq_bios_set() [ arch/i386/kernel/pci-irq.c ]
pcibios_set_irq_routing(..., 0, 12)
[ arch/i386/kernel/pci-pc.c ]
What is the reason of this situation:
1. pci=biosirq option is generally broken,
2. my BIOS is not compatible with pci=biosirq kernel parameter,
3. pcibios_set_irq_routing() call with pin=0 is incorrect,
4. ... another problem ?
My PCI bus works at 30MHz and its configuration:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1531 [Aladdin IV] (rev b3)
Subsystem: Acer Laboratories Inc. [ALi]: Unknown device 1531
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 set
00:02.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev b4)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 0 set
00:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 1100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin A routed to IRQ 0
Region 0: Memory at ed000000 (32-bit, prefetchable)
Region 1: Memory at efffc000 (32-bit, non-prefetchable)
Region 2: Memory at ef000000 (32-bit, non-prefetchable)
Expansion ROM at effe0000 [disabled]
00:06.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 3 min, 8 max, 64 set
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at ee80
Expansion ROM at effd0000 [disabled]
00:0b.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev 20) (prog-if fa)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 2 min, 4 max, 32 set
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at ffa0
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin A routed to IRQ 9
Region 0: Memory at efffb000 (32-bit, non-prefetchable)
--
=======================================================================
Andrzej M. Krzysztofowicz [email protected]
phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math., Technical University of Gdansk