Hi,
1st :
# depmod -a 2.4.3-pre8
depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/dummy.o
depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/eepro100.o
the rest :
it's Compaq PL 6500 with 4 penguins and 2 gig RAM
Compaq SMART2 hardware RAID and DLT are also bundled ! :)
Well, there is a problem with cpqarray driver. If I boot without noapic
it hangs right after
cpqarray: Device e11 has been found at 5 0
Compaq SMART2 Driver (v 2.4.2)
Found 1 controller(s)
cpqarray: Finding drives on ida0 (Smart Array 3200)
cpqarray ida/c0d0: blksz=512 nr_blks=17764320
cpqarray ida/c0d1: blksz=512 nr_blks=17764320
Partition check:
ida/c0d0
but if I put noapic I get only _one_ CPU usable ->
]# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 926630 0 0 0 XT-PIC timer
1: 11 0 0 0 XT-PIC keyboard
2: 0 0 0 0 XT-PIC cascade
8: 1 0 0 0 XT-PIC rtc
9: 34 0 0 0 XT-PIC sym53c8xx
10: 30 0 0 0 XT-PIC sym53c8xx
11: 2522 0 0 0 XT-PIC ida0
14: 3 0 0 0 XT-PIC ide0
15: 7547 0 0 0 XT-PIC eth1
NMI: 0 0 0 0
LOC: 926548 926547 926546 926545
ERR: 0
any patches to take/patch/slap !?
ps
any other required info available on request
--
Mario Miko?evi? (Mozgy)
My favourite FUBAR ...
Mario Mikocevic wrote:
>
> Hi,
>
> 1st :
>
> # depmod -a 2.4.3-pre8
> depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/dummy.o
> depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/eepro100.o
What are the unresolved symbols?
--
Jeff Garzik | May you have warm words on a cold evening,
Building 1024 | a full moon on a dark night,
MandrakeSoft | and a smooth road all the way to your door.