Hi,
This updates the nm256_audio driver to the 2.4 PCI API.
Patch is against 2.4.3-ac9, verified on Sony VAIO Laptop.
Ciao, Marcus
Index: drivers/sound/nm256_audio.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/nm256_audio.c,v
retrieving revision 1.1
diff -u -r1.1 nm256_audio.c
--- drivers/sound/nm256_audio.c 2001/04/17 14:50:30 1.1
+++ drivers/sound/nm256_audio.c 2001/04/19 15:28:43
@@ -15,6 +16,8 @@
* Changes:
* 11-10-2000 Bartlomiej Zolnierkiewicz <[email protected]>
* Added some __init
+ * 19-04-2001 Marcus Meissner <[email protected]>
+ * Ported to 2.4 PCI API.
*/
#define __NO_VERSION__
@@ -49,8 +52,6 @@
#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
-#define RSRCADDRESS(dev,num) ((dev)->resource[(num)].start)
-
/* List of cards. */
static struct nm256_info *nmcard_list;
@@ -1042,6 +1043,9 @@
struct pm_dev *pmdev;
int x;
+ if (pci_enable_device(pcidev))
+ return 0;
+
card = kmalloc (sizeof (struct nm256_info), GFP_KERNEL);
if (card == NULL) {
printk (KERN_ERR "NM256: out of memory!\n");
@@ -1055,7 +1059,7 @@
/* Init the memory port info. */
for (x = 0; x < 2; x++) {
- card->port[x].physaddr = RSRCADDRESS (pcidev, x);
+ card->port[x].physaddr = pci_resource_start (pcidev, x);
card->port[x].ptr = NULL;
card->port[x].start_offset = 0;
card->port[x].end_offset = 0;
@@ -1201,6 +1205,8 @@
}
}
+ pci_set_drvdata(pcidev,card);
+
/* Insert the card in the list. */
card->next_card = nmcard_list;
nmcard_list = card;
@@ -1251,37 +1257,38 @@
return 0;
}
-/*
- * This loop walks the PCI configuration database and finds where
- * the sound cards are.
- */
-
-int __init
-init_nm256(void)
+static int __devinit
+nm256_probe(struct pci_dev *pcidev,const struct pci_device_id *pciid)
{
- struct pci_dev *pcidev = NULL;
- int count = 0;
-
- if(! pci_present())
- return -ENODEV;
-
- while((pcidev = pci_find_device(PCI_VENDOR_ID_NEOMAGIC,
- PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO,
- pcidev)) != NULL) {
- count += nm256_install(pcidev, REV_NM256AV, "256AV");
- }
-
- while((pcidev = pci_find_device(PCI_VENDOR_ID_NEOMAGIC,
- PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO,
- pcidev)) != NULL) {
- count += nm256_install(pcidev, REV_NM256ZX, "256ZX");
+ if (pcidev->device == PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO)
+ return nm256_install(pcidev, REV_NM256AV, "256AV");
+ if (pcidev->device == PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO)
+ return nm256_install(pcidev, REV_NM256ZX, "256ZX");
+ return -1; /* should not come here ... */
+}
+
+static void __devinit
+nm256_remove(struct pci_dev *pcidev) {
+ struct nm256_info *xcard = pci_get_drvdata(pcidev);
+ struct nm256_info *card,*next_card = NULL;
+
+ for (card = nmcard_list; card != NULL; card = next_card) {
+ next_card = card->next_card;
+ if (card == xcard) {
+ stopPlay (card);
+ stopRecord (card);
+ if (card->has_irq)
+ free_irq (card->irq, card);
+ nm256_release_ports (card);
+ sound_unload_mixerdev (card->mixer_oss_dev);
+ sound_unload_audiodev (card->dev[0]);
+ sound_unload_audiodev (card->dev[1]);
+ kfree (card);
+ break;
+ }
}
-
- if (count == 0)
- return -ENODEV;
-
- printk (KERN_INFO "Done installing NM256 audio driver.\n");
- return 0;
+ if (nmcard_list == card)
+ nmcard_list = next_card;
}
/*
@@ -1639,9 +1646,21 @@
local_qlen: nm256_audio_local_qlen,
};
-EXPORT_SYMBOL(init_nm256);
+static struct pci_device_id nm256_pci_tbl[] __devinitdata = {
+ {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0},
+ {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0},
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, nm256_pci_tbl);
-static int loaded = 0;
+struct pci_driver nm256_pci_driver = {
+ name:"nm256_audio",
+ id_table:nm256_pci_tbl,
+ probe:nm256_probe,
+ remove:nm256_remove,
+};
MODULE_PARM (usecache, "i");
MODULE_PARM (buffertop, "i");
@@ -1650,37 +1669,13 @@
static int __init do_init_nm256(void)
{
- nmcard_list = NULL;
- printk (KERN_INFO "NeoMagic 256AV/256ZX audio driver, version 1.1\n");
-
- if (init_nm256 () == 0) {
- loaded = 1;
- return 0;
- }
- else
- return -ENODEV;
+ printk (KERN_INFO "NeoMagic 256AV/256ZX audio driver, version 1.1p\n");
+ return pci_module_init(&nm256_pci_driver);
}
static void __exit cleanup_nm256 (void)
{
- if (loaded) {
- struct nm256_info *card;
- struct nm256_info *next_card;
-
- for (card = nmcard_list; card != NULL; card = next_card) {
- stopPlay (card);
- stopRecord (card);
- if (card->has_irq)
- free_irq (card->irq, card);
- nm256_release_ports (card);
- sound_unload_mixerdev (card->mixer_oss_dev);
- sound_unload_audiodev (card->dev[0]);
- sound_unload_audiodev (card->dev[1]);
- next_card = card->next_card;
- kfree (card);
- }
- nmcard_list = NULL;
- }
+ pci_unregister_driver(&nm256_pci_driver);
pm_unregister_all (&handle_pm_event);
}
Marcus Meissner wrote:
>
> Hi,
>
> This updates the nm256_audio driver to the 2.4 PCI API.
>
> Patch is against 2.4.3-ac9, verified on Sony VAIO Laptop.
"verified" is the really important part with this driver, since its
really finicky. I have a patch I would love to bounce to you in
private, that I have been searching for a tester for -months- because I
had no test hardware of my own.
Your patch looks ok to me and I would say apply it. But I also think it
is incomplete.
* there is no need for a linked list of cards, since
pci_{get,set}_drvdata is used. This eliminates the list walk in
nm256_remove
* the new PCI API has suspend/resume hooks, and those should be used in
preference to register_pm_...
* there is rarely a need to compare PCI ids manually in a driver. Do
this implicitly by using the struct pci_device_id::driver_data field.
In the following code, you could simply pass these two strings as your
driver_data:
> + if (pcidev->device == PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO)
> + return nm256_install(pcidev, REV_NM256AV, "256AV");
> + if (pcidev->device == PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO)
> + return nm256_install(pcidev, REV_NM256ZX, "256ZX");
* typically you don't want to -always- printout the module version when
built into the kernel. that can get ugly, when you have a bunch of
drivers in the kernel. you should surround the existing version printk
code with ifdef MODULE, and then add some additional code in your
pci_driver::probe routine which looks something like
#ifndef MODULE
static int printed_version;
if (!printed_version++)
printk(version);
#endif
and further, declare your version string like the following code, so it
can be dropped from the kernel image...
static char version[] __devinitdata =
KERN_INFO "... version ...\n";
Looks good, thanks for the work! If you spot any other drivers you can
convert, feel free.
Jeff
--
Jeff Garzik | "The universe is like a safe to which there is a
Building 1024 | combination -- but the combination is locked up
MandrakeSoft | in the safe." -- Peter DeVries
On Thu, Apr 19, 2001 at 11:56:01AM -0400, Jeff Garzik wrote:
> Marcus Meissner wrote:
> >
> > Hi,
> >
> > This updates the nm256_audio driver to the 2.4 PCI API.
> >
> > Patch is against 2.4.3-ac9, verified on Sony VAIO Laptop.
>
> "verified" is the really important part with this driver, since its
> really finicky. I have a patch I would love to bounce to you in
> private, that I have been searching for a tester for -months- because I
> had no test hardware of my own.
Feel free to send (I have a NM256AV card in that VAIO).
> Your patch looks ok to me and I would say apply it. But I also think it
> is incomplete.
>
> * there is no need for a linked list of cards, since
> pci_{get,set}_drvdata is used. This eliminates the list walk in
> nm256_remove
The problem is with device opens, which just pass numbers, most other
sound drivers still use linked lists.
Hmm, but via8xxxx_audio.c doesn't, I will take this as example.
> * the new PCI API has suspend/resume hooks, and those should be used in
> preference to register_pm_...
Ok, will have another look at the other issues.
And I hope my colleague brings his VAIO to work tomorrow ;)
Ciao, Marcus