I cannot seem to mount my external USB host-powered 250 Mb zip-drive in
Linux-2.4.3-ac12. This is a freshly rebooted machine, rebooted with the
zip-drive attached and a zip-disk inside that Windows-2000 will read
without problems.
dmesg:
uhci.c: USB UHCI at I/O 0xc400, IRQ 7
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xc800, IRQ 7
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 240k freed
hub.c: USB new device connect on bus1/1, assigned device number 2
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: IOMEGA Model: ZIP 250 Rev: 61.T
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
sda : extended sense code = 2
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
======================================================================
IRQ 7 is an unshared IRQ.
I've read that the 'READ CAPACITY failed' indicates there is no disk
in the drive - but there is.
/proc/scsi/usb-storage-0/1:
Host scsi1: usb-storage
Vendor: Iomega
Product: USB Zip 250
Serial Number: 003240BCC4D11622
Protocol: Transparent SCSI
Transport: Bulk
GUID: 059b0032003240bcc4d11622
All seems fine, but when I do
mount /dev/sda4 /mnt
the whole kernel hangs, including the keyboard and the network.
Windows-2000 on the same hardware can access the device. If I strace the
mount progress, it hangs in
mount("/dev/sda4", "/mnt", "vfat", 0xc0ed000, 0
I've searched the web, searched the mailing lists at usb/sourceforge,
and I seem to be alone in this.
Hardware:
Abit VP6, dual P3/866
512 Mb memory
gcc-2.95.3
SuSE 7.1 basis
linux-2.4.3-ac12
Kernel config:
CONFIG_USB=y
CONFIG_USB_UHCI_ALT=y
CONFIG_USB_STORAGE=y
CONFIG_SCSI=y
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT=y
I thought that would do the trick?
Thanks for any help that prevents me from rebooting into Windows-2000
every time!
Jurriaan
--
I have transcended that phase in my intellectual growth where I discover
humour in simple freakishness. What exists is real, therefore it is tragic,
since whatever lives must die. Only fantasy, the vapors rising from sheer
nonsense, can now excite my laughter.
Jack Vance - Lyonesse II - The Green Pearl
GNU/Linux 2.4.3-ac12 SMP/ReiserFS 2x1743 bogomips load av: 0.05 0.03 0.00
I see you're using the alternate uhci driver... are hte results the same
with the other UHCI driver?
Can you turn on usb mass storage verbose debuggig (compile option) and then
send me the logs?
Matt
On Sun, Apr 29, 2001 at 07:58:56AM +0200, [email protected] wrote:
> I cannot seem to mount my external USB host-powered 250 Mb zip-drive in
> Linux-2.4.3-ac12. This is a freshly rebooted machine, rebooted with the
> zip-drive attached and a zip-disk inside that Windows-2000 will read
> without problems.
>
> dmesg:
> uhci.c: USB UHCI at I/O 0xc400, IRQ 7
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> uhci.c: USB UHCI at I/O 0xc800, IRQ 7
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 240k freed
> hub.c: USB new device connect on bus1/1, assigned device number 2
> scsi1 : SCSI emulation for USB Mass Storage devices
> Vendor: IOMEGA Model: ZIP 250 Rev: 61.T
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
> sda : READ CAPACITY failed.
> sda : status = 1, message = 00, host = 0, driver = 08
> sda : extended sense code = 2
> sda : block size assumed to be 512 bytes, disk size 1GB.
> sda: I/O error: dev 08:00, sector 0
> unable to read partition table
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 2
> ======================================================================
> IRQ 7 is an unshared IRQ.
> I've read that the 'READ CAPACITY failed' indicates there is no disk
> in the drive - but there is.
>
>
> /proc/scsi/usb-storage-0/1:
> Host scsi1: usb-storage
> Vendor: Iomega
> Product: USB Zip 250
> Serial Number: 003240BCC4D11622
> Protocol: Transparent SCSI
> Transport: Bulk
> GUID: 059b0032003240bcc4d11622
>
> All seems fine, but when I do
>
> mount /dev/sda4 /mnt
>
> the whole kernel hangs, including the keyboard and the network.
> Windows-2000 on the same hardware can access the device. If I strace the
> mount progress, it hangs in
>
> mount("/dev/sda4", "/mnt", "vfat", 0xc0ed000, 0
>
> I've searched the web, searched the mailing lists at usb/sourceforge,
> and I seem to be alone in this.
>
> Hardware:
>
> Abit VP6, dual P3/866
> 512 Mb memory
> gcc-2.95.3
> SuSE 7.1 basis
> linux-2.4.3-ac12
>
> Kernel config:
>
> CONFIG_USB=y
> CONFIG_USB_UHCI_ALT=y
> CONFIG_USB_STORAGE=y
> CONFIG_SCSI=y
> CONFIG_SCSI_DEBUG_QUEUES=y
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_SYM53C8XX=y
> CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
> CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
> CONFIG_SCSI_NCR53C8XX_SYNC=20
> CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT=y
>
> I thought that would do the trick?
>
> Thanks for any help that prevents me from rebooting into Windows-2000
> every time!
>
> Jurriaan
> --
> I have transcended that phase in my intellectual growth where I discover
> humour in simple freakishness. What exists is real, therefore it is tragic,
> since whatever lives must die. Only fantasy, the vapors rising from sheer
> nonsense, can now excite my laughter.
> Jack Vance - Lyonesse II - The Green Pearl
> GNU/Linux 2.4.3-ac12 SMP/ReiserFS 2x1743 bogomips load av: 0.05 0.03 0.00
--
Matthew Dharm Home: [email protected]
Maintainer, Linux USB Mass Storage Driver
Way to go, lava boy.
-- Stef to Greg
User Friendly, 3/26/1998
On Sun, Apr 29, 2001 at 09:13:46PM -0700, Matthew Dharm wrote:
> I see you're using the alternate uhci driver... are hte results the same
> with the other UHCI driver?
I have read in the help-files that that was the one to use on this
VIA694 motherboard.
>
> Can you turn on usb mass storage verbose debuggig (compile option) and then
> send me the logs?
>
I'll do that. In the meantime, 2.4.4 does work - so it's something in
the ac12 kernel that prevents it from working. Unfortunately I can't try
ac13 or ac14, since the pcnet32 code doesn't compile in those.
Jurriaan
--
And money rides while people crawl
And another quiet night goes by
Oysterband - Another quiet night in England
GNU/Linux 2.4.4 SMP/ReiserFS 2x1743 bogomips load av: 0.27 0.06 0.02