Hi there,
The PnP initialisation of my brand old SB AWE64 PnP was not supported by the
current (2.4.10) kernel driver (I could initialise it by using isapnptools,
but not directly by the pnp driver).
I patched sb_card.c so that the device ID of my board is known by the SB
driver, thus allowing the isapnp initialisation by the driver directly.
I tested it on my computer, and I don't expect the patch to break anything
(it's a no brainer fix)
Maybe you can consider applying it to the next release ?
Thank you,
/Jerome
PS: please CC: me for the replies, I'm not subscribed to linux-kernel
On Tue, Oct 02, 2001 at 05:52:05PM -0400, Jerome Cornet wrote:
> Hi there,
>
> The PnP initialisation of my brand old SB AWE64 PnP was not supported by the
> current (2.4.10) kernel driver (I could initialise it by using isapnptools,
> but not directly by the pnp driver).
>
> I patched sb_card.c so that the device ID of my board is known by the SB
> driver, thus allowing the isapnp initialisation by the driver directly.
>
> I tested it on my computer, and I don't expect the patch to break anything
> (it's a no brainer fix)
>
> Maybe you can consider applying it to the next release ?
>
> Thank you,
> /Jerome
>
> PS: please CC: me for the replies, I'm not subscribed to linux-kernel
Device ID should be added to id_table[] also. New patch attached.
--
Andrey Panin | Embedded systems software engineer
[email protected] | PGP key: http://www.orbita1.ru/~pazke/AndreyPanin.asc