Hi,
I switched from 2.4.16 to 2.4.17-pre5 without changing config and now
"make bzImage" fails with the following error:
----------------------------------------------------------------------------
tmppiggy=_tmp_$$piggy; \
rm -f $tmppiggy $tmppiggy.gz $tmppiggy.lnk; \
objcopy -O binary -R .note -R .comment -S /usr/src/linux/vmlinux
$tmppiggy; \
gzip -f -9 < $tmppiggy > $tmppiggy.gz; \
echo "SECTIONS { .data : { input_len = .; LONG(input_data_end -
input_data) input_data = .; *(.data) input_data_end = .; }}" >
$tmppiggy.lnk; \
ld -m elf_i386 -r -o piggy.o -b binary $tmppiggy.gz -b elf32-i386 -T
$tmppiggy.lnk; \
rm -f $tmppiggy $tmppiggy.gz $tmppiggy.lnk
gcc -D__ASSEMBLY__ -D__KERNEL__ -I/usr/src/linux/include -traditional -c
head.S
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
-Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=athlon -c misc.c
ld -m elf_i386 -Ttext 0x100000 -e startup_32 -o bvmlinux head.o misc.o
piggy.o
ld: bvmlinux: Not enough room for program headers (allocated 2, need 3)
ld: final link failed: Bad value
make[2]: *** [bvmlinux] Error 1
make[2]: Leaving directory directory
?/usr/src/linux/arch/i386/boot/compressed?
make[1]: *** [compressed/bvmlinux] Error 2
make[1]: Leaving directory directory
?/usr/src/linux/arch/i386/boot?
make: *** [bzImage] Error 2
----------------------------------------------------------------------------
Thanks for your support.
Dominik Geisel
--
The best we can hope for concerning the people at large is that they be
properly armed.
-Alexander Hamilton, The Federalist Papers at 184-188
9D84 35D7 07D8 6C3A 5D64 8F6E EAB5 159D E521 5E2D
[email protected] wrote:
>
> Hi,
>
> I switched from 2.4.16 to 2.4.17-pre5 without changing config and now
> "make bzImage" fails with the following error:
>
> ----------------------------------------------------------------------------
> tmppiggy=_tmp_$$piggy; \
> rm -f $tmppiggy $tmppiggy.gz $tmppiggy.lnk; \
> objcopy -O binary -R .note -R .comment -S /usr/src/linux/vmlinux
> $tmppiggy; \
> gzip -f -9 < $tmppiggy > $tmppiggy.gz; \
> echo "SECTIONS { .data : { input_len = .; LONG(input_data_end -
> input_data) input_data = .; *(.data) input_data_end = .; }}" >
> $tmppiggy.lnk; \
> ld -m elf_i386 -r -o piggy.o -b binary $tmppiggy.gz -b elf32-i386 -T
> $tmppiggy.lnk; \
> rm -f $tmppiggy $tmppiggy.gz $tmppiggy.lnk
> gcc -D__ASSEMBLY__ -D__KERNEL__ -I/usr/src/linux/include -traditional -c
> head.S
> gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common
> -pipe -mpreferred-stack-boundary=2 -march=athlon -c misc.c
> ld -m elf_i386 -Ttext 0x100000 -e startup_32 -o bvmlinux head.o misc.o
> piggy.o
> ld: bvmlinux: Not enough room for program headers (allocated 2, need 3)
> ld: final link failed: Bad value
did you upgrade your binutils recently?
--
Jeff Garzik | Only so many songs can be sung
Building 1024 | with two lips, two lungs, and one tongue.
MandrakeSoft | - nomeansno
On Thu, Dec 06, 2001 at 02:53:16PM -0500, Jeff Garzik wrote:
> did you upgrade your binutils recently?
Yes, I upgraded to binutils-2.11.92.0.7-3mdk from Mandrake cooker today.
--
Where I was born and how I have lived is unimportant. It is what I have
done with where I have been that should be of interest.
-Georgia O'Keefe
9D84 35D7 07D8 6C3A 5D64 8F6E EAB5 159D E521 5E2D
On Thu, 6 Dec 2001 [email protected] wrote:
> On Thu, Dec 06, 2001 at 02:53:16PM -0500, Jeff Garzik wrote:
> > did you upgrade your binutils recently?
>
> Yes, I upgraded to binutils-2.11.92.0.7-3mdk from Mandrake cooker today.
>
That's the problem I had same version. I did rpm -Uvh --oldpackage of the
old versions of binutils, libbinutils and it compiled fine
--
Chad Young
Registered Linux User #195191 @ http://counter.li.org
On Fri, 2001-12-07 at 01:07, skidley wrote:
> On Thu, 6 Dec 2001 [email protected] wrote:
>
> > On Thu, Dec 06, 2001 at 02:53:16PM -0500, Jeff Garzik wrote:
> > > did you upgrade your binutils recently?
> >
> > Yes, I upgraded to binutils-2.11.92.0.7-3mdk from Mandrake cooker today.
> >
> That's the problem I had same version. I did rpm -Uvh --oldpackage of the
> old versions of binutils, libbinutils and it compiled fine
> --
> Chad Young
> Registered Linux User #195191 @ http://counter.li.org
The problem isn't binutils, it's the kernel. binutils let the kernel
get away with it before, that's why it compiles fine on older versions.
[email protected] writes:
> On Thu, Dec 06, 2001 at 02:53:16PM -0500, Jeff Garzik wrote:
> > did you upgrade your binutils recently?
>
> Yes, I upgraded to binutils-2.11.92.0.7-3mdk from Mandrake cooker today.
get 4mdk it should be fixed there. (please: discus mdk problems on mdk ml's).