Hello,
I have a DEC Venutris 5120 (Pentium 120) with a Phoenix BIOS.
After LILO loads and uncompresses these kernels the machine
reboots. I have ecountered sombody else with the same problem.
I don't know the etails of his box but do know he also has a
Phoenix BIOS (10.( I believe).
Included here is my .config, though I have tried many and none
changed the outcome.
PS> Please (b)cc me with any replies as I am not on the list.
--begin
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
#CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_PIIX_TUNING=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_YMFPCI_LEGACY is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
--end
That is correct, I did a manaul .config and switched it to
PI. Didn't realize there was more than one setting *sigh*.
I'll try changing it with a make menuconfig.
Thanks!
PS> Why doesn't the CPU type *default* to whatever is listed
in /proc/cpunifo? I say only default ince I realize people
do build for other architectures.
> I have a DEC Venutris 5120 (Pentium 120) with a Phoenix BIOS.
> After LILO loads and uncompresses these kernels the machine
> reboots. I have ecountered sombody else with the same problem.
There are a set of old machines that do this sort of stuff with all 2.4.x
kernels. Right now I don't know why. The Digital celebris has the same
bug.
> CONFIG_PCI_BIOS=y
> CONFIG_PM=y
Turn both of these off
> CONFIG_PNP=y
> CONFIG_ISAPNP=y
And these
Let me know if that helps at all. Whats the last kernel that did work on it
?
Hello,
I had the same problem with a kernel which contained a damaged vmlinux.lds.
Did you compile a fresh kernel or play with patches on top of an old kernel
which was compiled many times ?
Regards,
Willy
On Sat, 08 Dec 2001 15:22:27 -0500,
Jerrad Pierce <[email protected]> wrote:
>PS> Why doesn't the CPU type *default* to whatever is listed
>in /proc/cpunifo? I say only default ince I realize people
>do build for other architectures.
In 2.5 there will be an option to probe the current hardware and
generate a specific config.
http://people.debian.org/~cate/files/kautoconfigure/autoconfigure/
On Sat, 2001-12-08 at 15:47, Alan Cox wrote:
> > I have a DEC Venutris 5120 (Pentium 120) with a Phoenix BIOS.
> > After LILO loads and uncompresses these kernels the machine
> > reboots. I have ecountered sombody else with the same problem.
>
> There are a set of old machines that do this sort of stuff with all 2.4.x
> kernels. Right now I don't know why. The Digital celebris has the same
> bug.
>
I have a Venturis (same board as the PPro celebris, just no sockets and
such for the dual that the celebris offered). There are odd problems
with this system. However, if you aren't running certain features, any
recent kernel WILL run.
> > CONFIG_PCI_BIOS=y
> > CONFIG_PM=y
>
> Turn both of these off
>
Even if you can get this system to boot (again PPro Venturis) w/ APM...
don't do it. It crashes whenever any APM feature is called.
> > CONFIG_PNP=y
> > CONFIG_ISAPNP=y
>
> And these
>
I am running with those enabled and everything works fine. Again, mine
is a little newer than his pentium models.
> Let me know if that helps at all. Whats the last kernel that did work on it
Anyway, just some data points. I believe my system is officially
Venturis GL 6200.
Trever Adams
> CONFIG_PCI_BIOS=y
> CONFIG_PM=y
> CONFIG_PNP=y
> CONFIG_ISAPNP=y
>Let me know if that helps at all.
I already had it built with these enabled and thought I'd try it
before rebuilding (since that is slow on a P120). And it booted fine.
however neither my 3C509 nor NetGear cards would work. I rebuilt with
these settings and the same thing occured.
>Whats the last kernel that did work on it?
2.2.5-15 stably. I tried 2.2.20 (after these problems with 2.4.x)
but it seemed to slow down markedly after a week of uptime.
Enc. boot.log
Enc. .config
--begin boot.log
Dec 8 22:03:21 dirty-bastard sshd: sshd shutdown succeeded
Dec 8 22:03:23 dirty-bastard sendmail: sendmail shutdown succeeded
Dec 8 22:03:24 dirty-bastard crond: crond shutdown succeeded
Dec 8 22:03:24 dirty-bastard dd: 1+0 records in
Dec 8 22:03:24 dirty-bastard dd: 1+0 records out
Dec 8 22:03:24 dirty-bastard random: Saving random seed succeeded
Dec 8 22:03:25 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 8 22:03:26 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 8 22:03:28 dirty-bastard syslog: klogd shutdown succeeded
Dec 8 22:03:53 dirty-bastard syslog: syslogd startup succeeded
Dec 8 22:03:53 dirty-bastard syslog: klogd startup succeeded
Dec 8 22:04:30 dirty-bastard rc.sysinit: Loading default keymap succeeded
Dec 8 22:04:31 dirty-bastard rc.sysinit: Setting default font succeeded
Dec 8 22:04:31 dirty-bastard rc.sysinit: Activating swap partitions succeeded
Dec 8 22:04:31 dirty-bastard rc.sysinit: Setting hostname dirty-bastard.pthbb.org succeeded
Dec 8 22:04:31 dirty-bastard fsck: /dev/hda1: clean, 35742/196608 files, 623146/786208 blocks
Dec 8 22:04:31 dirty-bastard rc.sysinit: Checking root filesystem succeeded
Dec 8 22:04:31 dirty-bastard isapnp: Board 1 has Identity 43 10 00 59 bd 28 00 8c 0e: CTL0028 Serial No 268458429 [checksum 43]
Dec 8 22:04:31 dirty-bastard isapnp: CTL0028/268458429[0]{Audio }: Ports 0x220 0x330 0x388; IRQ5 DMA1 DMA5 --- Enabled OK
Dec 8 22:04:31 dirty-bastard isapnp: CTL0028/268458429[2]{Reserved }: Port 0x110; --- Enabled OK
Dec 8 22:04:31 dirty-bastard isapnp: CTL0028/268458429[3]{Game }: Port 0x200; --- Enabled OK
Dec 8 22:04:31 dirty-bastard rc.sysinit: Setting up ISA PNP devices succeeded
Dec 8 22:04:31 dirty-bastard rc.sysinit: Remounting root filesystem in read-write mode succeeded
Dec 8 22:04:33 dirty-bastard rc.sysinit: Finding module dependencies succeeded
Dec 8 22:04:33 dirty-bastard fsck: /dev/hda2: clean, 38350/200704 files, 724899/800352 blocks
Dec 8 22:04:33 dirty-bastard rc.sysinit: Checking filesystems succeeded
Dec 8 22:04:33 dirty-bastard rc.sysinit: Mounting local filesystems succeeded
Dec 8 22:04:33 dirty-bastard rc.sysinit: Turning on user and group quotas for local filesystems succeeded
Dec 8 22:03:45 dirty-bastard date: Sat Dec 8 22:03:45 GMT 2001
Dec 8 22:03:45 dirty-bastard rc.sysinit: Setting clock (utc): Sat Dec 8 22:03:45 GMT 2001 succeeded
Dec 8 22:03:45 dirty-bastard rc.sysinit: Enabling swap space succeeded
Dec 8 22:03:46 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 8 22:03:47 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 8 22:03:50 dirty-bastard network: Bringing up interface lo succeeded
Dec 8 22:03:51 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 8 22:03:52 dirty-bastard random: Initializing random number generator succeeded
Dec 8 22:03:54 dirty-bastard crond: crond startup succeeded
Dec 8 22:03:59 dirty-bastard sshd: sshd startup succeeded
Dec 8 22:04:00 dirty-bastard keytable: Loading keymap:
Dec 8 22:04:01 dirty-bastard keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Dec 8 22:04:02 dirty-bastard keytable: Loading system font:
Dec 8 22:04:02 dirty-bastard rc: Starting keytable succeeded
Dec 8 22:04:06 dirty-bastard sendmail: sendmail startup succeeded
Dec 8 22:04:07 dirty-bastard ftpd: proftpd startup succeeded
Dec 8 22:04:10 dirty-bastard httpd: httpd startup succeeded
Dec 8 22:04:25 dirty-bastard httpsd: httpsd startup succeeded
Dec 8 22:04:26 dirty-bastard linuxconf: Linuxconf final setup
Dec 8 22:04:27 dirty-bastard rc: Starting linuxconf succeeded
Dec 8 22:04:28 dirty-bastard local:
Dec 8 22:04:28 dirty-bastard local: /dev/hda:
Dec 8 22:04:28 dirty-bastard local: setting 32-bit I/O support flag to 3
Dec 8 22:04:28 dirty-bastard local: setting multcount to 16
Dec 8 22:04:28 dirty-bastard local: setting keep_settings to 1 (on)
Dec 8 22:04:28 dirty-bastard local: setting xfermode to 34 (multiword DMA mode2)
Dec 8 22:04:28 dirty-bastard local: multcount = 16 (on)
Dec 8 22:04:28 dirty-bastard local: I/O support = 3 (32-bit w/sync)
Dec 8 22:04:28 dirty-bastard local: keepsettings = 1 (on)
Dec 8 22:04:28 dirty-bastard local:
Dec 8 22:04:28 dirty-bastard local: /dev/hdc:
Dec 8 22:04:28 dirty-bastard local: setting 32-bit I/O support flag to 1
Dec 8 22:04:28 dirty-bastard local: setting multcount to 16
Dec 8 22:04:28 dirty-bastard local: setting keep_settings to 1 (on)
Dec 8 22:04:28 dirty-bastard local: setting xfermode to 0 (default PIO mode)
Dec 8 22:04:28 dirty-bastard local: multcount = 16 (on)
Dec 8 22:04:28 dirty-bastard local: I/O support = 1 (32-bit)
Dec 8 22:04:29 dirty-bastard local: keepsettings = 1 (on)
Dec 8 22:04:29 dirty-bastard local: HDIO_DRIVE_CMD failed: Input/output error
Dec 8 22:04:29 dirty-bastard rc: Starting local succeeded
Dec 8 22:04:30 dirty-bastard webmin: Starting Webmin server in /home/net/admin
Dec 8 22:04:31 dirty-bastard rc: Starting webmin succeeded
Dec 8 17:21:29 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 8 17:21:29 dirty-bastard ifdown: eth1: unknown interface: No such device
Dec 8 17:21:29 dirty-bastard network: Shutting down interface eth1 succeeded
Dec 8 17:21:30 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 8 17:21:30 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 8 17:21:31 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 8 17:21:32 dirty-bastard network: Bringing up interface lo succeeded
Dec 8 17:21:33 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 8 17:21:34 dirty-bastard ifup: Delaying eth1 initialization.
Dec 8 17:21:34 dirty-bastard network: Bringing up interface eth1 failed
Dec 8 17:22:07 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 8 17:22:08 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 8 17:22:09 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 8 17:22:09 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 8 17:22:10 dirty-bastard network: Bringing up interface lo succeeded
Dec 8 17:22:11 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 8 22:22:59 dirty-bastard sshd: sshd shutdown succeeded
Dec 8 22:23:00 dirty-bastard sendmail: sendmail shutdown succeeded
Dec 8 22:23:01 dirty-bastard crond: crond shutdown succeeded
Dec 8 22:23:02 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 8 22:23:03 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 8 22:23:05 dirty-bastard syslog: klogd shutdown succeeded
Dec 8 22:23:30 dirty-bastard syslog: syslogd startup succeeded
Dec 8 22:23:30 dirty-bastard syslog: klogd startup succeeded
Dec 8 22:23:12 dirty-bastard random: Initializing random number generator succeeded
Dec 8 22:23:26 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 8 22:23:27 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 8 22:23:28 dirty-bastard network: Bringing up interface lo succeeded
Dec 8 22:23:29 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 8 22:23:31 dirty-bastard crond: crond startup succeeded
Dec 8 22:23:32 dirty-bastard sshd: sshd startup succeeded
Dec 8 22:23:32 dirty-bastard keytable: Loading keymap:
Dec 8 22:23:33 dirty-bastard keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Dec 8 22:23:33 dirty-bastard keytable: Loading system font:
Dec 8 22:23:33 dirty-bastard rc: Starting keytable succeeded
Dec 8 22:23:36 dirty-bastard sendmail: sendmail startup succeeded
Dec 8 22:23:37 dirty-bastard ftpd: proftpd startup succeeded
Dec 8 22:23:40 dirty-bastard httpd: httpd startup succeeded
Dec 8 22:23:53 dirty-bastard httpsd: httpsd startup succeeded
Dec 8 22:23:53 dirty-bastard linuxconf: Linuxconf final setup
Dec 8 22:23:55 dirty-bastard rc: Starting linuxconf succeeded
Dec 8 22:23:55 dirty-bastard local:
Dec 8 22:23:55 dirty-bastard local: /dev/hda:
Dec 8 22:23:55 dirty-bastard local: setting 32-bit I/O support flag to 3
Dec 8 22:23:55 dirty-bastard local: setting multcount to 16
Dec 8 22:23:55 dirty-bastard local: setting keep_settings to 1 (on)
Dec 8 22:23:55 dirty-bastard local: setting xfermode to 34 (multiword DMA mode2)
Dec 8 22:23:55 dirty-bastard local: multcount = 16 (on)
Dec 8 22:23:55 dirty-bastard local: I/O support = 3 (32-bit w/sync)
Dec 8 22:23:56 dirty-bastard local: keepsettings = 1 (on)
Dec 8 22:23:56 dirty-bastard local:
Dec 8 22:23:56 dirty-bastard local: /dev/hdc:
Dec 8 22:23:56 dirty-bastard local: setting 32-bit I/O support flag to 1
Dec 8 22:23:56 dirty-bastard local: setting multcount to 16
Dec 8 22:23:56 dirty-bastard local: setting keep_settings to 1 (on)
Dec 8 22:23:56 dirty-bastard local: setting xfermode to 0 (default PIO mode)
Dec 8 22:23:56 dirty-bastard local: multcount = 16 (on)
Dec 8 22:23:56 dirty-bastard local: I/O support = 1 (32-bit)
Dec 8 22:23:56 dirty-bastard local: keepsettings = 1 (on)
Dec 8 22:23:56 dirty-bastard local: HDIO_DRIVE_CMD failed: Input/output error
Dec 8 22:23:56 dirty-bastard rc: Starting local succeeded
Dec 8 22:23:56 dirty-bastard webmin: Starting Webmin server in /home/net/admin
Dec 8 22:23:57 dirty-bastard rc: Starting webmin succeeded
Dec 8 22:25:08 dirty-bastard sshd: sshd shutdown succeeded
Dec 8 22:25:09 dirty-bastard sendmail: sendmail shutdown succeeded
Dec 8 22:25:10 dirty-bastard crond: crond shutdown succeeded
Dec 8 22:25:10 dirty-bastard dd: 1+0 records in
Dec 8 22:25:10 dirty-bastard dd: 1+0 records out
Dec 8 22:25:10 dirty-bastard random: Saving random seed succeeded
Dec 8 22:25:11 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 8 22:25:12 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 8 22:25:14 dirty-bastard syslog: klogd shutdown succeeded
Dec 8 22:26:22 dirty-bastard syslog: syslogd startup succeeded
Dec 8 22:26:22 dirty-bastard syslog: klogd startup succeeded
Dec 8 22:25:55 dirty-bastard rc.sysinit: Loading default keymap succeeded
Dec 8 22:25:56 dirty-bastard rc.sysinit: Setting default font succeeded
Dec 8 22:25:56 dirty-bastard rc.sysinit: Activating swap partitions succeeded
Dec 8 22:25:56 dirty-bastard rc.sysinit: Setting hostname dirty-bastard.pthbb.org succeeded
Dec 8 22:25:56 dirty-bastard fsck: /dev/hda1: clean, 35743/196608 files, 623208/786208 blocks
Dec 8 22:25:56 dirty-bastard rc.sysinit: Checking root filesystem succeeded
Dec 8 22:25:56 dirty-bastard isapnp: Board 1 has Identity 43 10 00 59 bd 28 00 8c 0e: CTL0028 Serial No 268458429 [checksum 43]
Dec 8 22:25:56 dirty-bastard isapnp: CTL0028/268458429[0]{Audio }: Ports 0x220 0x330 0x388; IRQ5 DMA1 DMA5 --- Enabled OK
Dec 8 22:25:56 dirty-bastard isapnp: CTL0028/268458429[2]{Reserved }: Port 0x110; --- Enabled OK
Dec 8 22:25:56 dirty-bastard isapnp: CTL0028/268458429[3]{Game }: Port 0x200; --- Enabled OK
Dec 8 22:25:56 dirty-bastard rc.sysinit: Setting up ISA PNP devices succeeded
Dec 8 22:25:56 dirty-bastard rc.sysinit: Remounting root filesystem in read-write mode succeeded
Dec 8 22:26:08 dirty-bastard depmod: depmod:
Dec 8 22:26:08 dirty-bastard depmod: *** Unresolved symbols in /lib/modules/2.2.5-15/misc/maui.o
Dec 8 22:26:08 dirty-bastard rc.sysinit: Finding module dependencies succeeded
Dec 8 22:26:09 dirty-bastard fsck: /dev/hda2: clean, 38352/200704 files, 724908/800352 blocks
Dec 8 22:26:09 dirty-bastard rc.sysinit: Checking filesystems succeeded
Dec 8 22:26:11 dirty-bastard rc.sysinit: Mounting local filesystems succeeded
Dec 8 22:26:11 dirty-bastard rc.sysinit: Turning on user and group quotas for local filesystems succeeded
Dec 8 22:26:14 dirty-bastard date: Sat Dec 8 22:26:14 GMT 2001
Dec 8 22:26:14 dirty-bastard rc.sysinit: Setting clock (utc): Sat Dec 8 22:26:14 GMT 2001 succeeded
Dec 8 22:26:14 dirty-bastard rc.sysinit: Enabling swap space succeeded
Dec 8 22:26:15 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 8 22:26:16 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 8 22:26:19 dirty-bastard network: Bringing up interface lo succeeded
Dec 8 22:26:20 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 8 22:26:21 dirty-bastard random: Initializing random number generator succeeded
Dec 8 22:26:25 dirty-bastard crond: crond startup succeeded
Dec 8 22:26:29 dirty-bastard sshd: sshd startup succeeded
Dec 8 22:26:29 dirty-bastard keytable: Loading keymap:
Dec 8 22:26:30 dirty-bastard keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Dec 8 22:26:30 dirty-bastard keytable: Loading system font:
Dec 8 22:26:30 dirty-bastard rc: Starting keytable succeeded
Dec 8 22:26:34 dirty-bastard sendmail: sendmail startup succeeded
Dec 8 22:26:35 dirty-bastard ftpd: proftpd startup succeeded
Dec 8 22:26:38 dirty-bastard httpd: httpd startup succeeded
Dec 8 22:26:53 dirty-bastard httpsd: httpsd startup succeeded
Dec 8 22:26:54 dirty-bastard linuxconf: Linuxconf final setup
Dec 8 22:26:55 dirty-bastard rc: Starting linuxconf succeeded
Dec 8 22:26:56 dirty-bastard local:
Dec 8 22:26:56 dirty-bastard local: /dev/hda:
Dec 8 22:26:56 dirty-bastard local: setting 32-bit I/O support flag to 3
Dec 8 22:26:56 dirty-bastard local: setting multcount to 16
Dec 8 22:26:56 dirty-bastard local: setting keep_settings to 1 (on)
Dec 8 22:26:56 dirty-bastard local: setting xfermode to 34 (multiword DMA mode2)
Dec 8 22:26:56 dirty-bastard local: multcount = 16 (on)
Dec 8 22:26:56 dirty-bastard local: I/O support = 3 (32-bit w/sync)
Dec 8 22:26:56 dirty-bastard local: keepsettings = 1 (on)
Dec 8 22:26:56 dirty-bastard local: HDIO_DRIVE_CMD failed: Input/output error
Dec 8 22:26:56 dirty-bastard local:
Dec 8 22:26:56 dirty-bastard local: /dev/hdc:
Dec 8 22:26:57 dirty-bastard local: setting 32-bit I/O support flag to 1
Dec 8 22:26:57 dirty-bastard local: setting multcount to 16
Dec 8 22:26:57 dirty-bastard local: setting keep_settings to 1 (on)
Dec 8 22:26:57 dirty-bastard local: setting xfermode to 0 (default PIO mode)
Dec 8 22:26:57 dirty-bastard local: multcount = 16 (on)
Dec 8 22:26:57 dirty-bastard local: I/O support = 1 (32-bit)
Dec 8 22:26:57 dirty-bastard local: keepsettings = 1 (on)
Dec 8 22:26:57 dirty-bastard rc: Starting local succeeded
Dec 8 22:26:58 dirty-bastard webmin: Starting Webmin server in /home/net/admin
Dec 8 22:26:59 dirty-bastard rc: Starting webmin succeeded
Dec 9 03:51:58 dirty-bastard sshd: sshd shutdown succeeded
Dec 9 03:51:59 dirty-bastard sendmail: sendmail shutdown succeeded
Dec 9 03:52:00 dirty-bastard crond: crond shutdown succeeded
Dec 9 03:52:00 dirty-bastard dd: 1+0 records in
Dec 9 03:52:00 dirty-bastard dd: 1+0 records out
Dec 9 03:52:00 dirty-bastard random: Saving random seed succeeded
Dec 9 03:52:02 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 9 03:52:02 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 9 03:52:05 dirty-bastard syslog: klogd shutdown succeeded
Dec 9 03:52:56 dirty-bastard syslog: syslogd startup succeeded
Dec 9 03:52:56 dirty-bastard syslog: klogd startup succeeded
Dec 9 03:52:43 dirty-bastard rc.sysinit: Loading default keymap succeeded
Dec 9 03:52:44 dirty-bastard rc.sysinit: Setting default font succeeded
Dec 9 03:52:44 dirty-bastard rc.sysinit: Activating swap partitions succeeded
Dec 9 03:52:44 dirty-bastard rc.sysinit: Setting hostname dirty-bastard.pthbb.org succeeded
Dec 9 03:52:44 dirty-bastard fsck: /dev/hda1: clean, 35744/196608 files, 605131/786208 blocks
Dec 9 03:52:44 dirty-bastard rc.sysinit: Checking root filesystem succeeded
Dec 9 03:52:44 dirty-bastard isapnp: Board 1 has Identity 43 10 00 59 bd 28 00 8c 0e: CTL0028 Serial No 268458429 [checksum 43]
Dec 9 03:52:44 dirty-bastard isapnp: CTL0028/268458429[0]{Audio }: Ports 0x220 0x330 0x388; IRQ5 DMA1 DMA5 --- Enabled OK
Dec 9 03:52:44 dirty-bastard isapnp: CTL0028/268458429[2]{Reserved }: Port 0x110; --- Enabled OK
Dec 9 03:52:44 dirty-bastard isapnp: CTL0028/268458429[3]{Game }: Port 0x200; --- Enabled OK
Dec 9 03:52:44 dirty-bastard rc.sysinit: Setting up ISA PNP devices succeeded
Dec 9 03:52:44 dirty-bastard rc.sysinit: Remounting root filesystem in read-write mode succeeded
Dec 9 03:52:46 dirty-bastard depmod: depmod:
Dec 9 03:52:46 dirty-bastard depmod: *** Unresolved symbols in /lib/modules/2.4.16/kernel/drivers/sound/sb.o
Dec 9 03:52:46 dirty-bastard rc.sysinit: Finding module dependencies succeeded
Dec 9 03:52:46 dirty-bastard fsck: /dev/hda2: clean, 38356/200704 files, 724909/800352 blocks
Dec 9 03:52:46 dirty-bastard rc.sysinit: Checking filesystems succeeded
Dec 9 03:52:46 dirty-bastard rc.sysinit: Mounting local filesystems succeeded
Dec 9 03:52:46 dirty-bastard rc.sysinit: Turning on user and group quotas for local filesystems succeeded
Dec 9 03:52:48 dirty-bastard date: Sun Dec 9 03:52:48 GMT 2001
Dec 9 03:52:48 dirty-bastard rc.sysinit: Setting clock (utc): Sun Dec 9 03:52:48 GMT 2001 succeeded
Dec 9 03:52:48 dirty-bastard rc.sysinit: Enabling swap space succeeded
Dec 9 03:52:49 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 9 03:52:50 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 9 03:52:53 dirty-bastard network: Bringing up interface lo succeeded
Dec 9 03:52:54 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 9 03:52:55 dirty-bastard random: Initializing random number generator succeeded
Dec 9 03:52:57 dirty-bastard crond: crond startup succeeded
Dec 9 03:53:02 dirty-bastard sshd: sshd startup succeeded
Dec 9 03:53:04 dirty-bastard keytable: Loading keymap:
Dec 9 03:53:04 dirty-bastard keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Dec 9 03:53:05 dirty-bastard keytable: Loading system font:
Dec 9 03:53:05 dirty-bastard rc: Starting keytable succeeded
Dec 9 03:53:09 dirty-bastard sendmail: sendmail startup succeeded
Dec 9 03:53:09 dirty-bastard ftpd: proftpd startup succeeded
Dec 9 03:53:13 dirty-bastard httpd: httpd startup succeeded
Dec 9 03:53:29 dirty-bastard httpsd: httpsd startup succeeded
Dec 9 03:53:29 dirty-bastard linuxconf: Linuxconf final setup
Dec 9 03:53:31 dirty-bastard rc: Starting linuxconf succeeded
Dec 9 03:53:32 dirty-bastard local:
Dec 9 03:53:32 dirty-bastard local: /dev/hda:
Dec 9 03:53:32 dirty-bastard local: setting 32-bit I/O support flag to 3
Dec 9 03:53:32 dirty-bastard local: setting multcount to 16
Dec 9 03:53:32 dirty-bastard local: setting keep_settings to 1 (on)
Dec 9 03:53:32 dirty-bastard local: setting xfermode to 34 (multiword DMA mode2)
Dec 9 03:53:32 dirty-bastard local: multcount = 16 (on)
Dec 9 03:53:32 dirty-bastard local: I/O support = 3 (32-bit w/sync)
Dec 9 03:53:32 dirty-bastard local: keepsettings = 1 (on)
Dec 9 03:53:32 dirty-bastard local:
Dec 9 03:53:32 dirty-bastard local: /dev/hdc:
Dec 9 03:53:32 dirty-bastard local: setting 32-bit I/O support flag to 1
Dec 9 03:53:32 dirty-bastard local: setting multcount to 16
Dec 9 03:53:32 dirty-bastard local: setting keep_settings to 1 (on)
Dec 9 03:53:32 dirty-bastard local: setting xfermode to 0 (default PIO mode)
Dec 9 03:53:32 dirty-bastard local: multcount = 16 (on)
Dec 9 03:53:32 dirty-bastard local: I/O support = 1 (32-bit)
Dec 9 03:53:32 dirty-bastard local: keepsettings = 1 (on)
Dec 9 03:53:32 dirty-bastard local: HDIO_DRIVE_CMD failed: Input/output error
Dec 9 03:53:32 dirty-bastard rc: Starting local succeeded
Dec 9 03:53:34 dirty-bastard webmin: Starting Webmin server in /home/net/admin
Dec 9 03:53:34 dirty-bastard rc: Starting webmin succeeded
Dec 9 03:55:56 dirty-bastard sshd: sshd shutdown succeeded
Dec 9 03:55:57 dirty-bastard sendmail: sendmail shutdown succeeded
Dec 9 03:55:58 dirty-bastard crond: crond shutdown succeeded
Dec 9 03:55:58 dirty-bastard dd: 1+0 records in
Dec 9 03:55:58 dirty-bastard dd: 1+0 records out
Dec 9 03:55:58 dirty-bastard random: Saving random seed succeeded
Dec 9 03:55:59 dirty-bastard network: Shutting down interface eth0 succeeded
Dec 9 03:56:00 dirty-bastard network: Disabling IPv4 packet forwarding succeeded
Dec 9 03:56:02 dirty-bastard syslog: klogd shutdown succeeded
Dec 9 03:57:10 dirty-bastard syslog: syslogd startup succeeded
Dec 9 03:57:10 dirty-bastard syslog: klogd startup succeeded
Dec 9 03:56:44 dirty-bastard rc.sysinit: Loading default keymap succeeded
Dec 9 03:56:44 dirty-bastard rc.sysinit: Setting default font succeeded
Dec 9 03:56:44 dirty-bastard rc.sysinit: Activating swap partitions succeeded
Dec 9 03:56:44 dirty-bastard rc.sysinit: Setting hostname dirty-bastard.pthbb.org succeeded
Dec 9 03:56:44 dirty-bastard fsck: /dev/hda1: clean, 35744/196608 files, 605168/786208 blocks
Dec 9 03:56:44 dirty-bastard rc.sysinit: Checking root filesystem succeeded
Dec 9 03:56:44 dirty-bastard isapnp: Board 1 has Identity 43 10 00 59 bd 28 00 8c 0e: CTL0028 Serial No 268458429 [checksum 43]
Dec 9 03:56:44 dirty-bastard isapnp: CTL0028/268458429[0]{Audio }: Ports 0x220 0x330 0x388; IRQ5 DMA1 DMA5 --- Enabled OK
Dec 9 03:56:44 dirty-bastard isapnp: CTL0028/268458429[2]{Reserved }: Port 0x110; --- Enabled OK
Dec 9 03:56:44 dirty-bastard isapnp: CTL0028/268458429[3]{Game }: Port 0x200; --- Enabled OK
Dec 9 03:56:44 dirty-bastard rc.sysinit: Setting up ISA PNP devices succeeded
Dec 9 03:56:44 dirty-bastard rc.sysinit: Remounting root filesystem in read-write mode succeeded
Dec 9 03:56:56 dirty-bastard depmod: depmod:
Dec 9 03:56:56 dirty-bastard depmod: *** Unresolved symbols in /lib/modules/2.2.5-15/misc/maui.o
Dec 9 03:56:56 dirty-bastard rc.sysinit: Finding module dependencies succeeded
Dec 9 03:56:57 dirty-bastard fsck: /dev/hda2: clean, 38356/200704 files, 724911/800352 blocks
Dec 9 03:56:57 dirty-bastard rc.sysinit: Checking filesystems succeeded
Dec 9 03:56:59 dirty-bastard rc.sysinit: Mounting local filesystems succeeded
Dec 9 03:56:59 dirty-bastard rc.sysinit: Turning on user and group quotas for local filesystems succeeded
Dec 9 03:57:02 dirty-bastard date: Sun Dec 9 03:57:02 GMT 2001
Dec 9 03:57:02 dirty-bastard rc.sysinit: Setting clock (utc): Sun Dec 9 03:57:02 GMT 2001 succeeded
Dec 9 03:57:02 dirty-bastard rc.sysinit: Enabling swap space succeeded
Dec 9 03:57:03 dirty-bastard network: Enabling IPv4 packet forwarding succeeded
Dec 9 03:57:04 dirty-bastard ifup: SIOCADDRT: Network is unreachable
Dec 9 03:57:07 dirty-bastard network: Bringing up interface lo succeeded
Dec 9 03:57:08 dirty-bastard network: Bringing up interface eth0 succeeded
Dec 9 03:57:09 dirty-bastard random: Initializing random number generator succeeded
Dec 9 03:57:13 dirty-bastard crond: crond startup succeeded
Dec 9 03:57:17 dirty-bastard sshd: sshd startup succeeded
Dec 9 03:57:17 dirty-bastard keytable: Loading keymap:
Dec 9 03:57:18 dirty-bastard keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Dec 9 03:57:19 dirty-bastard keytable: Loading system font:
Dec 9 03:57:19 dirty-bastard rc: Starting keytable succeeded
Dec 9 03:57:22 dirty-bastard sendmail: sendmail startup succeeded
Dec 9 03:57:23 dirty-bastard ftpd: proftpd startup succeeded
Dec 9 03:57:26 dirty-bastard httpd: httpd startup succeeded
Dec 9 03:57:42 dirty-bastard httpsd: httpsd startup succeeded
Dec 9 03:57:43 dirty-bastard linuxconf: Linuxconf final setup
Dec 9 03:57:44 dirty-bastard rc: Starting linuxconf succeeded
Dec 9 03:57:45 dirty-bastard local:
Dec 9 03:57:45 dirty-bastard local: /dev/hda:
Dec 9 03:57:45 dirty-bastard local: setting 32-bit I/O support flag to 3
Dec 9 03:57:45 dirty-bastard local: setting multcount to 16
Dec 9 03:57:45 dirty-bastard local: setting keep_settings to 1 (on)
Dec 9 03:57:45 dirty-bastard local: setting xfermode to 34 (multiword DMA mode2)
Dec 9 03:57:45 dirty-bastard local: multcount = 16 (on)
Dec 9 03:57:45 dirty-bastard local: I/O support = 3 (32-bit w/sync)
Dec 9 03:57:45 dirty-bastard local: keepsettings = 1 (on)
Dec 9 03:57:46 dirty-bastard local:
Dec 9 03:57:46 dirty-bastard local: /dev/hdc:
Dec 9 03:57:46 dirty-bastard local: setting 32-bit I/O support flag to 1
Dec 9 03:57:46 dirty-bastard local: setting multcount to 16
Dec 9 03:57:46 dirty-bastard local: setting keep_settings to 1 (on)
Dec 9 03:57:46 dirty-bastard local: setting xfermode to 0 (default PIO mode)
Dec 9 03:57:46 dirty-bastard local: multcount = 16 (on)
Dec 9 03:57:46 dirty-bastard local: I/O support = 1 (32-bit)
Dec 9 03:57:46 dirty-bastard local: keepsettings = 1 (on)
Dec 9 03:57:47 dirty-bastard local: HDIO_DRIVE_CMD failed: Input/output error
Dec 9 03:57:47 dirty-bastard rc: Starting local succeeded
--end boot.log
--begin .config
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_PM is not set
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_YMFPCI_LEGACY is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
--end .config
> I have a Venturis (same board as the PPro celebris, just no sockets and
> such for the dual that the celebris offered). There are odd problems
> with this system. However, if you aren't running certain features, any
> recent kernel WILL run.
Can you send me the config you use and if you have any scribbled notes on
what to do to make it work that would be great. To most people
venturis/celebris is a 2.2 only computer and I'd love to change that.
Also if you run dmidecode on it do you get any tables ?
Alan
On Sun, 2001-12-09 at 11:26, Alan Cox wrote:
> > I have a Venturis (same board as the PPro celebris, just no sockets and
> > such for the dual that the celebris offered). There are odd problems
> > with this system. However, if you aren't running certain features, any
> > recent kernel WILL run.
>
> Can you send me the config you use and if you have any scribbled notes on
> what to do to make it work that would be great. To most people
> venturis/celebris is a 2.2 only computer and I'd love to change that.
>
> Also if you run dmidecode on it do you get any tables ?
>
> Alan
>
The only notes I really have are that you cannot use APM. You must use
more recent BIOS (mine is running one from late 1999 I believe... that
is recent since DEC is long gone). This is all from memory.
My configuration follows after.
I hope this helps people. Also, note that if you use pppd on 2.4.x (or
even most 2.2.x) w/ the Venturis PPro systems, you probably shouldn't
try to do anything more than 56k for port bitrate. Bad things start to
happen.
Some things not set, like ECN, do work, I just have reasons (in this
case, hotmail for my wife) to not use the things. I am sure this is
true w/ most drivers. However, this as listed below (# lines were
removed), lets me run my Venturis 6200 GL just fine with 2.4.x kernels
(and most 2.3.x kernels from wherever I started using them (can't
remember today)).
Trever
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_KMOD=y
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_ISAPNP=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETFILTER=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_PIIX_TUNING=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_TULIP=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_RTC=y
CONFIG_AUTOFS4_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_VGA_CONSOLE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
On Saturday 08 December 2001 15:47, Alan Cox wrote:
> There are a set of old machines that do this sort of stuff with all 2.4.x
> kernels. Right now I don't know why. The Digital celebris has the same
> bug.
Well it's nice to see I'm not alone in this. I gave up on my SuperMicro
Micro ATX 370 boards a few weeks ago. They were used primarily with WinNT so
they don't have a well establishied Linux track record. (Though one of them
did run a mid 2.2.?? for a short time, and I didn't notice any issues
with it.)
I'd like to use them as routers, but they die with heavy network activity.
>From my experience it looks like an IRQ problem, but no amount of BIOS
fiddling will get them stable.
My findings after playing around with them tonight
2.4.10 or 2.4.16 seems maybe a bit then 2.4.8
With a 'default' config it may take a few minutes of ping -f and
scp, it bring it down, but it will die suddenly rebooting.
The primary board I'm using is a D-Link Quad Tulip. By 'default' it
scans the eth's in reverse. pci=nosort fixes that. Something strange
is eth2 alwasy picks up irq 5, while the rest are 11 (it
always shifts to the logical eth2 depending on the sort)
Playing with various pci= options will get it so it dies instantly
from `ping -f`. pci=biosirq seems to be a sure bet.
> Turn both of these off
> And these
Didn't help. In fact it dies instantly with `ping -f`
--
The time is now 22:54 (Totalitarian) - http://www.ccops.org/