Hi Linus,
I would like to update the version of the wavelan_cs.c driver
in kernel 2.5.X to the latest release. The main reason is that the
driver included in the kernel work neither on my laptop nor on my SMP
desktop. Moreover, the driver was not updated to the new network API.
For some strange reasons, all my previous patches of the
driver have been dropped. The patch attached bring the wavelan_cs
driver in sync with the version in the Pcmcia package (so it's easier
for me to keep them in sync). The patch was done for kernel 2.5.2 but
applies also to 2.4.18-pre3.
This new version has survived my usual torture tests (SMP and
non-SMP), so could you please apply this patch ?
The Changelog is as follows :
----------------------------------------------
- reworked wv_82593_cmd to avoid using the IRQ handler and doing
ugly things with interrupts.
- Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
- Update to new network API (softnet - 2.3.43) :
o replace dev->tbusy (David + me)
o replace dev->tstart (David + me)
o remove dev->interrupt (David)
o add SMP locking via spinlock in splxx (me)
o add spinlock in interrupt handler (me)
o use kernel watchdog instead of ours (me)
o verify that all the changes make sense and work (me)
- Re-sync kernel/pcmcia versions (not much actually)
o Fix kmalloc in wavelan_attach differently
- A few other cleanups (David & me)...
- Check that SMP works, remove annoying log message
- Fix unfrequent card lockup when watchdog was reseting the hardware :
o control first busy loop in wv_82593_cmd()
o Extend spinlock protection in wv_hw_config()
----------------------------------------------
On a related topic : I need to move 3 drivers that I maintain
(wavelan.c, wavelan_cs.c and netwave.c) into the directory
drivers/net/wireless.
Do you prefer a *huge* patch, or do you prefer (a small shell
script + a small patch) ?
Regards,
Jean
--------------------------------------------------------------------------
diff -u -p -r linux/drivers/net/pcmcia-buggy/wavelan.h linux/drivers/net/pcmcia/wavelan.h
--- linux/drivers/net/pcmcia-buggy/wavelan.h Fri Mar 2 11:02:15 2001
+++ linux/drivers/net/pcmcia/wavelan.h Fri Jan 11 14:25:31 2002
@@ -88,6 +88,7 @@ const short channel_bands[] = { 0x30, 0x
*/
const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
+
/*************************** PC INTERFACE ****************************/
/* WaveLAN host interface definitions */
@@ -316,6 +317,7 @@ struct mmw_t
/* Calculate offset of a field in the above structure */
#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
+
/*
* Modem Management Controller (MMC) read structure.
*/
@@ -372,6 +374,7 @@ struct mmr_t
/* Calculate offset of a field in the above structure */
#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
+
/* Make the two above structures one */
typedef union mm_t
diff -u -p -r linux/drivers/net/pcmcia-buggy/wavelan_cs.c linux/drivers/net/pcmcia/wavelan_cs.c
--- linux/drivers/net/pcmcia-buggy/wavelan_cs.c Fri Nov 9 15:22:54 2001
+++ linux/drivers/net/pcmcia/wavelan_cs.c Fri Jan 11 14:57:51 2002
@@ -22,7 +22,7 @@
#ifdef WAVELAN_ROAMING
* Roaming support added 07/22/98 by Justin Seger ([email protected])
* based on patch by Joe Finney from Lancaster University.
-#endif :-)
+#endif
*
* Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
* Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
@@ -37,12 +37,6 @@
* Apr 2 '98 made changes to bring the i82593 control/int handling in line
* with offical specs...
*
- * Changes:
- * Arnaldo Carvalho de Melo <[email protected]> - 08/08/2000
- * - reorganize kmallocs in wavelan_attach, checking all for failure
- * and releasing the previous allocations if one fails
- *
- *
****************************************************************************
* Copyright 1995
* Anthony D. Joseph
@@ -72,6 +66,34 @@
/*------------------------------------------------------------------*/
/*
+ * Wrapper for disabling interrupts.
+ * (note : inline, so optimised away)
+ */
+static inline void
+wv_splhi(net_local * lp,
+ unsigned long * pflags)
+{
+ spin_lock_irqsave(&lp->spinlock, *pflags);
+ /* Note : above does the cli(); itself */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper for re-enabling interrupts.
+ */
+static inline void
+wv_splx(net_local * lp,
+ unsigned long * pflags)
+{
+ spin_unlock_irqrestore(&lp->spinlock, *pflags);
+
+ /* Note : enabling interrupts on the hardware is done in wv_ru_start()
+ * via : outb(OP1_INT_ENABLE, LCCR(base));
+ */
+}
+
+/*------------------------------------------------------------------*/
+/*
* Wrapper for reporting error to cardservices
*/
static void cs_error(client_handle_t handle, int func, int ret)
@@ -103,7 +125,7 @@ wv_structuct_check(void)
/******************* MODEM MANAGEMENT SUBROUTINES *******************/
/*
- * Usefull subroutines to manage the modem of the wavelan
+ * Useful subroutines to manage the modem of the wavelan
*/
/*------------------------------------------------------------------*/
@@ -138,7 +160,7 @@ hacr_write_slow(u_long base,
{
hacr_write(base, hacr);
/* delay might only be needed sometimes */
- mdelay(1L);
+ mdelay(1);
} /* hacr_write_slow */
/*------------------------------------------------------------------*/
@@ -529,7 +551,7 @@ void wv_roam_init(struct net_device *dev
lp->curr_point=NULL; /* No default WavePoint */
lp->cell_search=0;
- lp->cell_timer.data=(int)lp; /* Start cell expiry timer */
+ lp->cell_timer.data=(long)lp; /* Start cell expiry timer */
lp->cell_timer.function=wl_cell_expiry;
lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
add_timer(&lp->cell_timer);
@@ -569,18 +591,18 @@ void wv_nwid_filter(unsigned char mode,
#endif
/* Disable interrupts & save flags */
- spin_lock_irqsave (&lp->lock, flags);
+ wv_splhi(lp, &flags);
m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
- /* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore (&lp->lock, flags);
-
if(mode==NWID_PROMISC)
lp->cell_search=1;
else
- lp->cell_search=0;
+ lp->cell_search=0;
+
+ /* ReEnable interrupts & restore flags */
+ wv_splx(lp, &flags);
}
/* Find a record in the WavePoint table matching a given NWID */
@@ -737,7 +759,7 @@ void wv_roam_handover(wavepoint_history
ioaddr_t base = lp->dev->base_addr;
mm_t m;
unsigned long flags;
-
+
if(wavepoint==lp->curr_point) /* Sanity check... */
{
wv_nwid_filter(!NWID_PROMISC,lp);
@@ -749,16 +771,16 @@ void wv_roam_handover(wavepoint_history
#endif
/* Disable interrupts & save flags */
- spin_lock_irqsave(&lp->lock, flags);
-
+ wv_splhi(lp, &flags);
+
m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
/* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore (&lp->lock, flags);
-
+ wv_splx(lp, &flags);
+
wv_nwid_filter(!NWID_PROMISC,lp);
lp->curr_point=wavepoint;
}
@@ -775,6 +797,11 @@ static inline void wl_roam_gather(device
wavepoint_history *wavepoint=NULL; /* WavePoint table entry */
net_local *lp=(net_local *)dev->priv; /* Device info */
+#if 0
+ /* Some people don't need this, some other may need it */
+ nwid=nwid^ntohs(beacon->domain_id);
+#endif
+
#if WAVELAN_ROAMING_DEBUG > 1
printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
@@ -832,7 +859,9 @@ static inline int WAVELAN_BEACON(unsigne
/*------------------------------------------------------------------*/
/*
* Routine to synchronously send a command to the i82593 chip.
- * Should be called with interrupts enabled.
+ * Should be called with interrupts disabled.
+ * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
+ * wv_82593_config() & wv_diag())
*/
static int
wv_82593_cmd(device * dev,
@@ -841,74 +870,98 @@ wv_82593_cmd(device * dev,
int result)
{
ioaddr_t base = dev->base_addr;
- net_local * lp = (net_local *)dev->priv;
int status;
+ int wait_completed;
long spin;
- u_long flags;
/* Spin until the chip finishes executing its current command (if any) */
+ spin = 1000;
do
{
- spin_lock_irqsave (&lp->lock, flags);
+ /* Time calibration of the loop */
+ udelay(10);
+
+ /* Read the interrupt register */
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
- spin_unlock_irqrestore (&lp->lock, flags);
}
- while((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE);
+ while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
- /* We are waiting for command completion */
- wv_wait_completed = TRUE;
+ /* If the interrupt hasn't be posted */
+ if(spin <= 0)
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
+ str, status);
+#endif
+ return(FALSE);
+ }
/* Issue the command to the controller */
outb(cmd, LCCR(base));
- /* If we don't have to check the result of the command */
+ /* If we don't have to check the result of the command
+ * Note : this mean that the irq handler will deal with that */
if(result == SR0_NO_RESULT)
- {
- wv_wait_completed = FALSE;
- return(TRUE);
- }
+ return(TRUE);
- /* Busy wait while the LAN controller executes the command.
- * Note : wv_wait_completed should be volatile */
- spin = 0;
- while(wv_wait_completed && (spin++ < 1000))
- udelay(10);
+ /* We are waiting for command completion */
+ wait_completed = TRUE;
- /* If the interrupt handler hasn't be called */
- if(wv_wait_completed)
+ /* Busy wait while the LAN controller executes the command. */
+ spin = 1000;
+ do
{
- outb(OP0_NOP, LCCR(base));
+ /* Time calibration of the loop */
+ udelay(10);
+
+ /* Read the interrupt register */
+ outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
status = inb(LCSR(base));
- if(status & SR0_INTERRUPT)
+
+ /* Check if there was an interrupt posted */
+ if((status & SR0_INTERRUPT))
{
- /* There was an interrupt : call the interrupt handler */
-#ifdef DEBUG_INTERRUPT_ERROR
- printk(KERN_WARNING "wv_82593_cmd: interrupt handler not installed or interrupt disabled\n");
-#endif
+ /* Acknowledge the interrupt */
+ outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
- wavelan_interrupt(dev->irq, (void *) dev,
- (struct pt_regs *) NULL);
+ /* Check if interrupt is a command completion */
+ if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
+ ((status & SR0_BOTH_RX_TX) != 0x0) &&
+ !(status & SR0_RECEPTION))
+ {
+ /* Signal command completion */
+ wait_completed = FALSE;
+ }
+ else
+ {
+ /* Note : Rx interrupts will be handled later, because we can
+ * handle multiple Rx packets at once */
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
+#endif
+ }
}
- else
- {
- wv_wait_completed = 0; /* XXX */
+ }
+ while(wait_completed && (spin-- > 0));
+
+ /* If the interrupt hasn't be posted */
+ if(wait_completed)
+ {
#ifdef DEBUG_INTERRUPT_ERROR
- printk(KERN_INFO "wv_82593_cmd: %s timeout, status0 0x%02x\n",
- str, status);
+ printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
+ str, status);
#endif
- /* We probably should reset the controller here */
- return(FALSE);
- }
+ return(FALSE);
}
- /* Check the return code provided by the interrupt handler against
+ /* Check the return code returned by the card (see above) against
* the expected return code provided by the caller */
- if((lp->status & SR0_EVENT_MASK) != result)
+ if((status & SR0_EVENT_MASK) != result)
{
#ifdef DEBUG_INTERRUPT_ERROR
- printk(KERN_INFO "wv_82593_cmd: %s failed, status0 = 0x%x\n",
- str, lp->status);
+ printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
+ str, status);
#endif
return(FALSE);
}
@@ -924,14 +977,16 @@ wv_82593_cmd(device * dev,
static inline int
wv_diag(device * dev)
{
+ int ret = FALSE;
+
if(wv_82593_cmd(dev, "wv_diag(): diagnose",
OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED))
- return(TRUE);
+ ret = TRUE;
#ifdef DEBUG_CONFIG_ERROR
printk(KERN_INFO "wavelan_cs: i82593 Self Test failed!\n");
#endif
- return(FALSE);
+ return(ret);
} /* wv_diag */
/*------------------------------------------------------------------*/
@@ -951,15 +1006,6 @@ read_ringbuf(device * dev,
int chunk_len;
char * buf_ptr = buf;
-#ifdef OLDIES
- /* After having check skb_put (net/core/skbuff.c) in the kernel, it seem
- * quite safe to remove this... */
-
- /* If buf is NULL, just increment the ring buffer pointer */
- if(buf == NULL)
- return((ring_ptr - RX_BASE + len) % RX_SIZE + RX_BASE);
-#endif
-
/* Get all the buffer */
while(len > 0)
{
@@ -990,70 +1036,32 @@ read_ringbuf(device * dev,
* wavelan_interrupt is not an option...), so you may experience
* some delay sometime...
*/
-static inline void wv_82593_reconfig (device * dev)
+static inline void
+wv_82593_reconfig(device * dev)
{
- net_local *lp = (net_local *) dev->priv;
- dev_link_t *link = ((net_local *) dev->priv)->link;
+ net_local * lp = (net_local *)dev->priv;
+ dev_link_t * link = ((net_local *) dev->priv)->link;
+ unsigned long flags;
+
+ /* Arm the flag, will be cleard in wv_82593_config() */
+ lp->reconfig_82593 = TRUE;
- /* Check if we can do it now ! */
- if (!(link->open)) {
- lp->reconfig_82593 = TRUE;
+ /* Check if we can do it now ! */
+ if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
+ {
+ wv_splhi(lp, &flags); /* Disable interrupts */
+ wv_82593_config(dev);
+ wv_splx(lp, &flags); /* Re-enable interrupts */
+ }
+ else
+ {
#ifdef DEBUG_IOCTL_INFO
- printk (KERN_DEBUG "%s: wv_82593_reconfig(): delayed (link = %d)\n",
- dev->name, link->open);
+ printk(KERN_DEBUG
+ "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
+ dev->name, dev->state, link->open);
#endif
- } else {
- netif_stop_queue (dev);
-
- lp->reconfig_82593 = FALSE;
- wv_82593_config (dev);
- netif_wake_queue (dev);
- }
-}
-
-#ifdef OLDIES
-/*------------------------------------------------------------------*/
-/*
- * Dumps the current i82593 receive buffer to the console.
- */
-static void wavelan_dump(device *dev)
-{
- ioaddr_t base = dev->base_addr;
- int i, c;
-
- /* disable receiver so we can use channel 1 */
- outb(OP0_RCV_DISABLE, LCCR(base));
-
- /* reset receive DMA pointer */
- hacr_write_slow(base, HACR_PWR_STAT | HACR_RX_DMA_RESET);
- hacr_write(base, HACR_DEFAULT);
-
- /* dump into receive buffer */
- wv_82593_cmd(dev, "wavelan_dump(): dump", CR0_CHNL|OP0_DUMP, SR0_DUMP_DONE);
-
- /* set read pointer to start of receive buffer */
- outb(0, PIORL(base));
- outb(0, PIORH(base));
-
- printk(KERN_DEBUG "wavelan_cs: dump:\n");
- printk(KERN_DEBUG " 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
- for(i = 0; i < 73; i++){
- if((i % 16) == 0) {
- printk("\n0x%02x:", i);
- if (!i) {
- printk(" ");
- continue;
- }
}
- c = inb(PIOP(base));
- printk("%02x ", c);
- }
- printk("\n");
-
- /* enable the receiver again */
- wv_ru_start(dev);
}
-#endif
/********************* DEBUG & INFO SUBROUTINES *********************/
/*
@@ -1171,6 +1179,8 @@ wv_mmc_show(device * dev)
return;
}
+ wv_splhi(lp, &flags);
+
/* Read the mmc */
mmc_out(base, mmwoff(0, mmw_freeze), 1);
mmc_read(base, 0, (u_char *)&m, sizeof(m));
@@ -1181,6 +1191,8 @@ wv_mmc_show(device * dev)
lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
#endif /* WIRELESS_EXT */
+ wv_splx(lp, &flags);
+
printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
@@ -1265,6 +1277,7 @@ static void
wv_dev_show(device * dev)
{
printk(KERN_DEBUG "dev:");
+ printk(" state=%lX,", dev->state);
printk(" trans_start=%ld,", dev->trans_start);
printk(" flags=0x%x,", dev->flags);
printk("\n");
@@ -1404,7 +1417,7 @@ wv_init_info(device * dev)
printk("2430.5");
break;
default:
- printk("unknown");
+ printk("???");
}
}
@@ -1719,7 +1732,7 @@ wv_set_frequency(u_long base, /* i/o po
memcmp(dac, dac_verify, 2 * 2))
{
#ifdef DEBUG_IOCTL_ERROR
- printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
+ printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (??)\n");
#endif
return -EOPNOTSUPP;
}
@@ -1892,7 +1905,7 @@ wavelan_ioctl(struct net_device * dev, /
#endif
/* Disable interrupts & save flags */
- spin_lock_irqsave (&lp->lock, flags);
+ wv_splhi(lp, &flags);
/* Look what is the request */
switch(cmd)
@@ -1968,7 +1981,7 @@ wavelan_ioctl(struct net_device * dev, /
case SIOCGIWFREQ:
/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
- * (does it work for everybody XXX - especially old cards...) */
+ * (does it work for everybody ??? - especially old cards...) */
if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
(MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
{
@@ -2239,15 +2252,17 @@ wavelan_ioctl(struct net_device * dev, /
{
struct iw_range range;
- /* Set the length (very important for backward compatibility) */
- wrq->u.data.length = sizeof(struct iw_range);
+ /* Set the length (very important for backward compatibility) */
+ wrq->u.data.length = sizeof(struct iw_range);
- /* Set all the info we don't care or don't know about to zero */
- memset(&range, 0, sizeof(range));
+ /* Set all the info we don't care or don't know about to zero */
+ memset(&range, 0, sizeof(range));
- /* Set the Wireless Extension versions */
- range.we_version_compiled = WIRELESS_EXT;
- range.we_version_source = 9; /* Nothing for us in v10 and v11 */
+#if WIRELESS_EXT > 10
+ /* Set the Wireless Extension versions */
+ range.we_version_compiled = WIRELESS_EXT;
+ range.we_version_source = 9; /* Nothing for us in v10 and v11 */
+#endif /* WIRELESS_EXT > 10 */
/* Set information in the range struct */
range.throughput = 1.4 * 1000 * 1000; /* don't argue on this ! */
@@ -2517,7 +2532,7 @@ wavelan_ioctl(struct net_device * dev, /
}
/* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore (&lp->lock, flags);
+ wv_splx(lp, &flags);
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: <-wavelan_ioctl()\n", dev->name);
@@ -2543,11 +2558,8 @@ wavelan_get_wireless_stats(device * dev)
printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
#endif
- if (lp == NULL) /* XXX will this ever occur? */
- return NULL;
-
/* Disable interrupts & save flags */
- spin_lock_irqsave (&lp->lock, flags);
+ wv_splhi(lp, &flags);
wstats = &lp->wstats;
@@ -2573,7 +2585,7 @@ wavelan_get_wireless_stats(device * dev)
wstats->discard.misc = 0L;
/* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore (&lp->lock, flags);
+ wv_splx(lp, &flags);
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
@@ -2692,12 +2704,6 @@ wv_packet_read(device * dev,
skb->protocol = eth_type_trans(skb, dev);
#ifdef DEBUG_RX_INFO
- /* Another glitch : Due to the way the GET_PACKET macro is written,
- * we are not sure to have the same thing in skb->data. On the other
- * hand, skb->mac.raw is not defined everywhere...
- * For versions between 1.2.13 and those where skb->mac.raw appear,
- * I don't have a clue...
- */
wv_packet_info(skb->mac.raw, sksize, dev->name, "wv_packet_read");
#endif /* DEBUG_RX_INFO */
@@ -2731,9 +2737,7 @@ wv_packet_read(device * dev,
wl_roam_gather(dev, skb->data, stats);
#endif /* WAVELAN_ROAMING */
- /* Spying stuff */
#ifdef WIRELESS_SPY
- /* Same as above */
wl_spy_gather(dev, skb->mac.raw + WAVELAN_ADDR_SIZE, stats);
#endif /* WIRELESS_SPY */
#ifdef HISTOGRAM
@@ -2766,6 +2770,7 @@ wv_packet_read(device * dev,
* called to do the actual transfer of the card's data including the
* ethernet header into a packet consisting of an sk_buff chain.
* (called by wavelan_interrupt())
+ * Note : the spinlock is already grabbed for us and irq are disabled.
*/
static inline void
wv_packet_rcv(device * dev)
@@ -2916,7 +2921,7 @@ wv_packet_write(device * dev,
printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
#endif
- spin_lock_irqsave (&lp->lock, flags);
+ wv_splhi(lp, &flags);
/* Check if we need some padding */
if(clen < ETH_ZLEN)
@@ -2946,15 +2951,7 @@ wv_packet_write(device * dev,
/* Keep stats up to date */
lp->stats.tx_bytes += length;
- /* If watchdog not already active, activate it... */
- if (!timer_pending(&lp->watchdog))
- {
- /* set timer to expire in WATCHDOG_JIFFIES */
- lp->watchdog.expires = jiffies + WATCHDOG_JIFFIES;
- add_timer(&lp->watchdog);
- }
-
- spin_unlock_irqrestore (&lp->lock, flags);
+ wv_splx(lp, &flags);
#ifdef DEBUG_TX_INFO
wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
@@ -2963,56 +2960,57 @@ wv_packet_write(device * dev,
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
#endif
-
- netif_start_queue (dev);
}
/*------------------------------------------------------------------*/
/*
* This routine is called when we want to send a packet (NET3 callback)
- * In this routine, we check if the hardware is ready to accept
+ * In this routine, we check if the harware is ready to accept
* the packet. We also prevent reentrance. Then, we call the function
* to send the packet...
*/
-static int wavelan_packet_xmit (struct sk_buff *skb,
- device * dev)
+static int
+wavelan_packet_xmit(struct sk_buff * skb,
+ device * dev)
{
- net_local *lp = (net_local *) dev->priv;
+ net_local * lp = (net_local *)dev->priv;
+ unsigned long flags;
#ifdef DEBUG_TX_TRACE
- printk (KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
- (unsigned) skb);
+ printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
+ (unsigned) skb);
#endif
- /*
- * For ethernet, fill in the header.
- */
+ /*
+ * Block a timer-based transmit from overlapping a previous transmit.
+ * In other words, prevent reentering this routine.
+ */
+ netif_stop_queue(dev);
- netif_stop_queue (dev);
+ /* If somebody has asked to reconfigure the controller,
+ * we can do it now */
+ if(lp->reconfig_82593)
+ {
+ wv_splhi(lp, &flags); /* Disable interrupts */
+ wv_82593_config(dev);
+ wv_splx(lp, &flags); /* Re-enable interrupts */
+ /* Note : the configure procedure was totally synchronous,
+ * so the Tx buffer is now free */
+ }
- /*
- * Block a timer-based transmit from overlapping a previous transmit.
- * In other words, prevent reentering this routine.
- */
- if (1) {
- /* If somebody has asked to reconfigure the controller, we can do it now */
- if (lp->reconfig_82593) {
- lp->reconfig_82593 = FALSE;
- wv_82593_config (dev);
- }
#ifdef DEBUG_TX_ERROR
- if (skb->next)
- printk (KERN_INFO "skb has next\n");
+ if (skb->next)
+ printk(KERN_INFO "skb has next\n");
#endif
- wv_packet_write (dev, skb->data, skb->len);
- }
- dev_kfree_skb (skb);
+ wv_packet_write(dev, skb->data, skb->len);
+
+ dev_kfree_skb(skb);
#ifdef DEBUG_TX_TRACE
- printk (KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
+ printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
#endif
- return (0);
+ return(0);
}
/********************** HARDWARE CONFIGURATION **********************/
@@ -3165,7 +3163,7 @@ wv_mmc_init(device * dev)
*/
/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
- * (does it work for everybody XXX - especially old cards...) */
+ * (does it work for everybody ??? - especially old cards...) */
/* Note : WFREQSEL verify that it is able to read from EEprom
* a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
* is 0xA (Xilinx version) or 0xB (Ariadne version).
@@ -3223,7 +3221,7 @@ static int
wv_ru_stop(device * dev)
{
ioaddr_t base = dev->base_addr;
- net_local *lp = (net_local *) dev->priv;
+ net_local * lp = (net_local *) dev->priv;
unsigned long flags;
int status;
int spin;
@@ -3232,35 +3230,35 @@ wv_ru_stop(device * dev)
printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
#endif
+ wv_splhi(lp, &flags);
+
/* First, send the LAN controller a stop receive command */
wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
OP0_STOP_RCV, SR0_NO_RESULT);
/* Then, spin until the receive unit goes idle */
- spin = 0;
+ spin = 300;
do
{
udelay(10);
- spin_lock_irqsave (&lp->lock, flags);
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
- spin_unlock_irqrestore (&lp->lock, flags);
}
- while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin++ < 300));
+ while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));
/* Now, spin until the chip finishes executing its current command */
do
{
udelay(10);
- spin_lock_irqsave (&lp->lock, flags);
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
- spin_unlock_irqrestore (&lp->lock, flags);
}
- while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin++ < 300));
+ while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
+
+ wv_splx(lp, &flags);
/* If there was a problem */
- if(spin > 300)
+ if(spin <= 0)
{
#ifdef DEBUG_CONFIG_ERROR
printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
@@ -3287,6 +3285,7 @@ wv_ru_start(device * dev)
{
ioaddr_t base = dev->base_addr;
net_local * lp = (net_local *) dev->priv;
+ unsigned long flags;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
@@ -3300,6 +3299,8 @@ wv_ru_start(device * dev)
if(!wv_ru_stop(dev))
return FALSE;
+ wv_splhi(lp, &flags);
+
/* Now we know that no command is being executed. */
/* Set the receive frame pointer and stop pointer */
@@ -3309,8 +3310,17 @@ wv_ru_start(device * dev)
/* Reset ring management. This sets the receive frame pointer to 1 */
outb(OP1_RESET_RING_MNGMT, LCCR(base));
+#if 0
+ /* XXX the i82593 manual page 6-4 seems to indicate that the stop register
+ should be set as below */
+ /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
+#elif 0
+ /* but I set it 0 instead */
+ lp->stop = 0;
+#else
/* but I set it to 3 bytes per packet less than 8K */
lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
+#endif
outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
outb(OP1_INT_ENABLE, LCCR(base));
outb(OP1_SWIT_TO_PORT_0, LCCR(base));
@@ -3326,17 +3336,15 @@ wv_ru_start(device * dev)
#ifdef DEBUG_I82593_SHOW
{
int status;
- unsigned long flags;
- int i = 0;
+ int opri;
+ int spin = 10000;
/* spin until the chip starts receiving */
do
{
- spin_lock_irqsave (&lp->lock, flags);
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
- spin_unlock_irqrestore (&lp->lock, flags);
- if(i++ > 10000)
+ if(spin-- <= 0)
break;
}
while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
@@ -3345,6 +3353,9 @@ wv_ru_start(device * dev)
(status & SR3_RCV_STATE_MASK), i);
}
#endif
+
+ wv_splx(lp, &flags);
+
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
#endif
@@ -3363,6 +3374,7 @@ wv_82593_config(device * dev)
ioaddr_t base = dev->base_addr;
net_local * lp = (net_local *) dev->priv;
struct i82593_conf_block cfblk;
+ int ret = TRUE;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
@@ -3457,7 +3469,7 @@ wv_82593_config(device * dev)
hacr_write(base, HACR_DEFAULT);
if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
OP0_CONFIGURE, SR0_CONFIGURE_DONE))
- return(FALSE);
+ ret = FALSE;
/* Initialize adapter's ethernet MAC address */
outb(TX_BASE & 0xff, PIORL(base));
@@ -3471,7 +3483,7 @@ wv_82593_config(device * dev)
hacr_write(base, HACR_DEFAULT);
if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
OP0_IA_SETUP, SR0_IA_SETUP_DONE))
- return(FALSE);
+ ret = FALSE;
#ifdef WAVELAN_ROAMING
/* If roaming is enabled, join the "Beacon Request" multicast group... */
@@ -3508,14 +3520,17 @@ wv_82593_config(device * dev)
hacr_write(base, HACR_DEFAULT);
if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
OP0_MC_SETUP, SR0_MC_SETUP_DONE))
- return(FALSE);
+ ret = FALSE;
lp->mc_count = dev->mc_count; /* remember to avoid repeated reset */
}
+ /* Job done, clear the flag */
+ lp->reconfig_82593 = FALSE;
+
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
#endif
- return(TRUE);
+ return(ret);
}
/*------------------------------------------------------------------*/
@@ -3594,6 +3609,8 @@ wv_hw_config(device * dev)
{
net_local * lp = (net_local *) dev->priv;
ioaddr_t base = dev->base_addr;
+ unsigned long flags;
+ int ret = FALSE;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
@@ -3612,50 +3629,78 @@ wv_hw_config(device * dev)
if(wv_pcmcia_reset(dev) == FALSE)
return FALSE;
- /* Power UP the module + reset the modem + reset host adapter
- * (in fact, reset DMA channels) */
- hacr_write_slow(base, HACR_RESET);
- hacr_write(base, HACR_DEFAULT);
+ /* Disable interrupts */
+ wv_splhi(lp, &flags);
- /* Check if the module has been powered up... */
- if(hasr_read(base) & HASR_NO_CLK)
+ /* Disguised goto ;-) */
+ do
{
+ /* Power UP the module + reset the modem + reset host adapter
+ * (in fact, reset DMA channels) */
+ hacr_write_slow(base, HACR_RESET);
+ hacr_write(base, HACR_DEFAULT);
+
+ /* Check if the module has been powered up... */
+ if(hasr_read(base) & HASR_NO_CLK)
+ {
#ifdef DEBUG_CONFIG_ERRORS
- printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
- dev->name);
+ printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
+ dev->name);
#endif
- return FALSE;
- }
+ break;
+ }
- /* initialize the modem */
- if(wv_mmc_init(dev) == FALSE)
- return FALSE;
+ /* initialize the modem */
+ if(wv_mmc_init(dev) == FALSE)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
+ dev->name);
+#endif
+ break;
+ }
- /* reset the LAN controller (i82593) */
- outb(OP0_RESET, LCCR(base));
- mdelay(1); /* A bit crude ! */
-
- /* Initialize the LAN controller */
- if((wv_82593_config(dev) == FALSE) ||
- (wv_diag(dev) == FALSE))
- {
+ /* reset the LAN controller (i82593) */
+ outb(OP0_RESET, LCCR(base));
+ mdelay(1); /* A bit crude ! */
+
+ /* Initialize the LAN controller */
+ if(wv_82593_config(dev) == FALSE)
+ {
#ifdef DEBUG_CONFIG_ERRORS
- printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n", dev->name);
+ printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
+ dev->name);
#endif
- return FALSE;
- }
+ break;
+ }
- /*
- * insert code for loopback test here
- */
+ /* Diagnostic */
+ if(wv_diag(dev) == FALSE)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
+ dev->name);
+#endif
+ break;
+ }
- /* The device is now configured */
- lp->configured = 1;
+ /*
+ * insert code for loopback test here
+ */
+
+ /* The device is now configured */
+ lp->configured = 1;
+ ret = TRUE;
+ }
+ while(0);
+
+ /* Re-enable interrupts */
+ wv_splx(lp, &flags);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
#endif
- return TRUE;
+ return(ret);
}
/*------------------------------------------------------------------*/
@@ -3675,10 +3720,6 @@ wv_hw_reset(device * dev)
printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
#endif
- /* If watchdog was activated, kill it ! */
- if (timer_pending(&lp->watchdog))
- del_timer(&lp->watchdog);
-
lp->nresets++;
lp->configured = 0;
@@ -3786,13 +3827,13 @@ wv_pcmcia_config(dev_link_t * link)
}
/*
- * Allocate a 4K memory window. Note that the dev_link_t
+ * Allocate a small memory window. Note that the dev_link_t
* structure provides space for one window handle -- if your
* device needs several windows, you'll need to keep track of
* the handles in your private data structure, link->priv.
*/
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
- req.Base = 0; req.Size = 0x1000;
+ req.Base = req.Size = 0;
req.AccessSpeed = mem_speed;
link->win = (window_handle_t)link->handle;
i = CardServices(RequestWindow, &link->win, &req);
@@ -3803,7 +3844,7 @@ wv_pcmcia_config(dev_link_t * link)
}
dev->rmem_start = dev->mem_start =
- (u_long)ioremap(req.Base, 0x1000);
+ (u_long)ioremap(req.Base, req.Size);
dev->rmem_end = dev->mem_end = dev->mem_start + req.Size;
mem.CardOffset = 0; mem.Page = 0;
@@ -3817,7 +3858,7 @@ wv_pcmcia_config(dev_link_t * link)
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
- netif_start_queue (dev);
+ netif_start_queue(dev);
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART 0x%x IRQ %d IOPORT 0x%x\n",
@@ -3843,7 +3884,7 @@ wv_pcmcia_config(dev_link_t * link)
return FALSE;
}
- /* XXX Could you explain me this, Dave ? */
+ strcpy(((net_local *) dev->priv)->node.dev_name, dev->name);
link->dev = &((net_local *) dev->priv)->node;
#ifdef DEBUG_CONFIG_TRACE
@@ -3887,7 +3928,7 @@ wv_pcmcia_release(u_long arg) /* Address
CardServices(ReleaseIO, link->handle, &link->io);
CardServices(ReleaseIRQ, link->handle, &link->irq);
- link->state &= ~(DEV_CONFIG | DEV_RELEASE_PENDING | DEV_STALE_CONFIG);
+ link->state &= ~(DEV_CONFIG | DEV_STALE_CONFIG);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
@@ -3896,7 +3937,7 @@ wv_pcmcia_release(u_long arg) /* Address
/*------------------------------------------------------------------*/
/*
- * Sometimes, netwave_detach can't be performed following a call from
+ * Sometimes, wavelan_detach can't be performed following a call from
* cardmgr (device still open, pcmcia_release not done) and the device
* is put in a STALE_LINK state and remains in memory.
*
@@ -3970,7 +4011,19 @@ wavelan_interrupt(int irq,
lp = (net_local *) dev->priv;
base = dev->base_addr;
- spin_lock (&lp->lock);
+#ifdef DEBUG_INTERRUPT_INFO
+ /* Check state of our spinlock (it should be cleared) */
+ if(spin_is_locked(&lp->spinlock))
+ printk(KERN_DEBUG
+ "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
+ dev->name);
+#endif
+
+ /* Prevent reentrancy. We need to do that because we may have
+ * multiple interrupt handler running concurently.
+ * It is safe because wv_splhi() disable interrupts before aquiring
+ * the spinlock. */
+ spin_lock(&lp->spinlock);
/* Treat all pending interrupts */
while(1)
@@ -4015,8 +4068,6 @@ wavelan_interrupt(int irq,
break;
}
- lp->status = status0; /* Save current status (for commands) */
-
/* ----------------- RECEIVING PACKET ----------------- */
/*
* When the wavelan signal the reception of a new packet,
@@ -4054,22 +4105,6 @@ wavelan_interrupt(int irq,
* Most likely : transmission done
*/
- /* If we are already waiting elsewhere for the command to complete */
- if(wv_wait_completed)
- {
-#ifdef DEBUG_INTERRUPT_INFO
- printk(KERN_DEBUG "%s: wv_interrupt(): command completed\n",
- dev->name);
-#endif
-
- /* Signal command completion */
- wv_wait_completed = 0;
-
- /* Acknowledge the interrupt */
- outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
- continue;
- }
-
/* If a transmission has been done */
if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
(status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
@@ -4081,10 +4116,6 @@ wavelan_interrupt(int irq,
dev->name);
#endif
- /* If watchdog was activated, kill it ! */
- if(timer_pending(&lp->watchdog))
- del_timer(&lp->watchdog);
-
/* Get transmission status */
tx_status = inb(LCSR(base));
tx_status |= (inb(LCSR(base)) << 8);
@@ -4174,7 +4205,7 @@ wavelan_interrupt(int irq,
lp->stats.collisions += (tx_status & TX_NCOL_MASK);
lp->stats.tx_packets++;
- netif_wake_queue (dev);
+ netif_wake_queue(dev);
outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */
}
else /* if interrupt = transmit done or retransmit done */
@@ -4185,9 +4216,9 @@ wavelan_interrupt(int irq,
#endif
outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */
}
- }
+ } /* while(1) */
- spin_unlock_irq (&lp->lock);
+ spin_unlock(&lp->spinlock);
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
@@ -4196,30 +4227,23 @@ wavelan_interrupt(int irq,
/*------------------------------------------------------------------*/
/*
- * Watchdog : when we start a transmission, we set a timer in the
- * kernel. If the transmission complete, this timer is disabled. If
- * it expire, it try to unlock the hardware.
+ * Watchdog: when we start a transmission, a timer is set for us in the
+ * kernel. If the transmission completes, this timer is disabled. If
+ * the timer expires, we are called and we try to unlock the hardware.
*
- * Note : this watchdog doesn't work on the same principle as the
- * watchdog in the ISA driver. I make it this way because the overhead
- * of add_timer() and del_timer() is nothing and that it avoid calling
- * the watchdog, saving some CPU... If you want to apply the same
- * watchdog to the ISA driver, you should be a bit carefull, because
- * of the many transmit buffers...
- * This watchdog is also move clever, it try to abort the current
- * command before reseting everything...
+ * Note : This watchdog is move clever than the one in the ISA driver,
+ * because it try to abort the current command before reseting
+ * everything...
+ * On the other hand, it's a bit simpler, because we don't have to
+ * deal with the multiple Tx buffers...
*/
static void
-wavelan_watchdog(u_long a)
+wavelan_watchdog(device * dev)
{
- device * dev;
- net_local * lp;
- ioaddr_t base;
- int spin;
-
- dev = (device *) a;
- base = dev->base_addr;
- lp = (net_local *) dev->priv;
+ net_local * lp = (net_local *) dev->priv;
+ ioaddr_t base = dev->base_addr;
+ unsigned long flags;
+ int aborted = FALSE;
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
@@ -4230,21 +4254,21 @@ wavelan_watchdog(u_long a)
dev->name);
#endif
- /* We are waiting for command completion */
- wv_wait_completed = TRUE;
+ wv_splhi(lp, &flags);
/* Ask to abort the current command */
outb(OP0_ABORT, LCCR(base));
- /* Busy wait while the LAN controller executes the command.
- * Note : wv_wait_completed should be volatile */
- spin = 0;
- while(wv_wait_completed && (spin++ < 250))
- udelay(10);
-
- /* If the interrupt handler hasn't be called or invalid status */
- if((wv_wait_completed) ||
- ((lp->status & SR0_EVENT_MASK) != SR0_EXECUTION_ABORTED))
+ /* Wait for the end of the command (a bit hackish) */
+ if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
+ OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
+ aborted = TRUE;
+
+ /* Release spinlock here so that wv_hw_reset() can grab it */
+ wv_splx(lp, &flags);
+
+ /* Check if we were successful in aborting it */
+ if(!aborted)
{
/* It seem that it wasn't enough */
#ifdef DEBUG_INTERRUPT_ERROR
@@ -4269,7 +4293,7 @@ wavelan_watchdog(u_long a)
#endif
/* We are no more waiting for something... */
- netif_start_queue (dev);
+ netif_wake_queue(dev);
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
@@ -4322,7 +4346,7 @@ wavelan_open(device * dev)
return FALSE;
if(!wv_ru_start(dev))
wv_hw_reset(dev); /* If problem : reset */
- netif_start_queue (dev);
+ netif_start_queue(dev);
/* Mark the device as used */
link->open++;
@@ -4348,7 +4372,6 @@ static int
wavelan_close(device * dev)
{
dev_link_t * link = ((net_local *) dev->priv)->link;
- net_local * lp = (net_local *)dev->priv;
ioaddr_t base = dev->base_addr;
#ifdef DEBUG_CALLBACK_TRACE
@@ -4356,8 +4379,6 @@ wavelan_close(device * dev)
(unsigned int) dev);
#endif
- netif_stop_queue (dev);
-
/* If the device isn't open, then nothing to do */
if(!link->open)
{
@@ -4373,17 +4394,13 @@ wavelan_close(device * dev)
wv_roam_cleanup(dev);
#endif /* WAVELAN_ROAMING */
- /* If watchdog was activated, kill it ! */
- if(timer_pending(&lp->watchdog))
- del_timer(&lp->watchdog);
-
link->open--;
MOD_DEC_USE_COUNT;
/* If the card is still present */
- if (netif_device_present(dev))
+ if(netif_running(dev))
{
- netif_stop_queue (dev);
+ netif_stop_queue(dev);
/* Stop receiving new messages and wait end of transmission */
wv_ru_stop(dev);
@@ -4404,21 +4421,6 @@ wavelan_close(device * dev)
/*------------------------------------------------------------------*/
/*
- * We never need to do anything when a wavelan device is "initialized"
- * by the net software, because we only register already-found cards.
- */
-static int
-wavelan_init(device * dev)
-{
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "<>wavelan_init()\n");
-#endif
-
- return(0);
-}
-
-/*------------------------------------------------------------------*/
-/*
* wavelan_attach() creates an "instance" of the driver, allocating
* local data structures for one device (one interface). The device
* is registered with Card Services.
@@ -4445,24 +4447,8 @@ wavelan_attach(void)
/* Initialize the dev_link_t structure */
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
- if (!link)
- return NULL;
-
- /* Allocate the generic data structure */
- dev = kmalloc(sizeof(struct net_device), GFP_KERNEL);
- if (!dev)
- goto fail_alloc_dev;
-
- /* Allocate the wavelan-specific data structure. */
- lp = (net_local *) kmalloc(sizeof(net_local), GFP_KERNEL);
- if (!lp)
- goto fail_alloc_dev_priv;
-
- memset(lp, 0, sizeof(net_local));
+ if (!link) return NULL;
memset(link, 0, sizeof(struct dev_link_t));
- memset(dev, 0, sizeof(struct net_device));
-
- dev->priv = lp;
/* Unused for the Wavelan */
link->release.function = &wv_pcmcia_release;
@@ -4492,18 +4478,35 @@ wavelan_attach(void)
link->next = dev_list;
dev_list = link;
+ /* Allocate the generic data structure */
+ dev = kmalloc(sizeof(struct net_device), GFP_KERNEL);
+ if (!dev) {
+ kfree(link);
+ return NULL;
+ }
+ memset(dev, 0x00, sizeof(struct net_device));
link->priv = link->irq.Instance = dev;
+ /* Allocate the wavelan-specific data structure. */
+ dev->priv = lp = (net_local *) kmalloc(sizeof(net_local), GFP_KERNEL);
+ if (!lp) {
+ kfree(link);
+ kfree(dev);
+ return NULL;
+ }
+ memset(lp, 0x00, sizeof(net_local));
+
/* Init specific data */
- wv_wait_completed = 0;
- lp->status = FALSE;
lp->configured = 0;
lp->reconfig_82593 = FALSE;
lp->nresets = 0;
+ /* Multicast stuff */
+ lp->promiscuous = 0;
+ lp->allmulticast = 0;
+ lp->mc_count = 0;
- /* Set the watchdog timer */
- lp->watchdog.function = wavelan_watchdog;
- lp->watchdog.data = (unsigned long) dev;
+ /* Init spinlock */
+ spin_lock_init(&lp->spinlock);
/* back links */
lp->link = link;
@@ -4513,7 +4516,6 @@ wavelan_attach(void)
ether_setup(dev);
/* wavelan NET3 callbacks */
- dev->init = &wavelan_init;
dev->open = &wavelan_open;
dev->stop = &wavelan_close;
dev->hard_start_xmit = &wavelan_packet_xmit;
@@ -4523,14 +4525,16 @@ wavelan_attach(void)
dev->set_mac_address = &wavelan_set_mac_address;
#endif /* SET_MAC_ADDRESS */
+ /* Set the watchdog timer */
+ dev->tx_timeout = &wavelan_watchdog;
+ dev->watchdog_timeo = WATCHDOG_JIFFIES;
+
#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
dev->do_ioctl = wavelan_ioctl; /* wireless extensions */
dev->get_wireless_stats = wavelan_get_wireless_stats;
#endif
/* Other specific data */
- strcpy(dev->name, ((net_local *)dev->priv)->node.dev_name);
- netif_start_queue (dev);
dev->mtu = WAVELAN_MTU;
/* Register with Card Services */
@@ -4562,12 +4566,6 @@ wavelan_attach(void)
#endif
return link;
-
-fail_alloc_dev_priv:
- kfree(dev);
-fail_alloc_dev:
- kfree(link);
- return NULL;
}
/*------------------------------------------------------------------*/
@@ -4698,7 +4696,7 @@ wavelan_event(event_t event, /* The ev
if(link->state & DEV_CONFIG)
{
/* Accept no more transmissions */
- netif_device_detach(dev);
+ netif_device_detach(dev);
/* Release the card */
wv_pcmcia_release((u_long) link);
@@ -4720,7 +4718,7 @@ wavelan_event(event_t event, /* The ev
* obliged to close nicely the wavelan here. David, could you
* close the device before suspending them ? And, by the way,
* could you, on resume, add a "route add -net ..." after the
- * ifconfig up XXX Thanks... */
+ * ifconfig up ??? Thanks... */
/* Stop receiving new messages and wait end of transmission */
wv_ru_stop(dev);
@@ -4735,8 +4733,7 @@ wavelan_event(event_t event, /* The ev
if(link->state & DEV_CONFIG)
{
if(link->open)
- netif_device_detach(dev);
-
+ netif_device_detach(dev);
CardServices(ReleaseConfiguration, link->handle);
}
break;
@@ -4748,7 +4745,7 @@ wavelan_event(event_t event, /* The ev
if(link->state & DEV_CONFIG)
{
CardServices(RequestConfiguration, link->handle, &link->conf);
- if(link->open) /* If RESET -> True, If RESUME -> False XXX */
+ if(link->open) /* If RESET -> True, If RESUME -> False ??? */
{
wv_hw_reset(dev);
netif_device_attach(dev);
@@ -4838,4 +4835,3 @@ exit_wavelan_cs(void)
module_init(init_wavelan_cs);
module_exit(exit_wavelan_cs);
-MODULE_LICENSE("Dual BSD/GPL");
diff -u -p -r linux/drivers/net/pcmcia-buggy/wavelan_cs.h linux/drivers/net/pcmcia/wavelan_cs.h
--- linux/drivers/net/pcmcia-buggy/wavelan_cs.h Tue Jan 8 17:27:48 2002
+++ linux/drivers/net/pcmcia/wavelan_cs.h Fri Jan 11 14:58:25 2002
@@ -34,6 +34,25 @@
* I try to maintain a web page with the Wireless LAN Howto at :
* http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
*
+ * SMP
+ * ---
+ * We now are SMP compliant (I eventually fixed the remaining bugs).
+ * The driver has been tested on a dual P6-150 and survived my usual
+ * set of torture tests.
+ * Anyway, I spent enough time chasing interrupt re-entrancy during
+ * errors or reconfigure, and I designed the locked/unlocked sections
+ * of the driver with great care, and with the recent addition of
+ * the spinlock (thanks to the new API), we should be quite close to
+ * the truth.
+ * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
+ * but better safe than sorry (especially at 2 Mb/s ;-).
+ *
+ * I have also looked into disabling only our interrupt on the card
+ * (via HACR) instead of all interrupts in the processor (via cli),
+ * so that other driver are not impacted, and it look like it's
+ * possible, but it's very tricky to do right (full of races). As
+ * the gain would be mostly for SMP systems, it can wait...
+ *
* Debugging and options
* ---------------------
* You will find below a set of '#define" allowing a very fine control
@@ -122,7 +141,7 @@
* Yunzhou Li <[email protected]> finished is work.
* Joe Finney <[email protected]> patched the driver to start
* correctly 2.00 cards (2.4 GHz with frequency selection).
- * David Hinds <[email protected]> integrated the whole in his
+ * David Hinds <[email protected]> integrated the whole in his
* Pcmcia package (+ bug corrections).
*
* I (Jean Tourrilhes - [email protected]) then started to make some
@@ -158,8 +177,8 @@
*
* This software was originally developed under Linux 1.2.3
* (Slackware 2.0 distribution).
- * And then under Linux 2.0.x (Debian 1.1 - pcmcia 2.8.18-23) with
- * HP OmniBook 4000 & 5500.
+ * And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+)
+ * with an HP OmniBook 4000 and then a 5500.
*
* It is based on other device drivers and information either written
* or supplied by:
@@ -174,7 +193,7 @@
* Matthew Geier ([email protected]),
* Remo di Giovanni ([email protected]),
* Mark Hagan ([email protected]),
- * David Hinds <[email protected]>,
+ * David Hinds <[email protected]>,
* Jan Hoogendoorn (c/o [email protected]),
* Bruce Janson <[email protected]>,
* Anthony D. Joseph <[email protected]>,
@@ -349,6 +368,32 @@
* - Fix check for root permission (break instead of exit)
* - New nwid & encoding setting (Wireless Extension 9)
*
+ * Changes made for release in 3.1.12 :
+ * ----------------------------------
+ * - reworked wv_82593_cmd to avoid using the IRQ handler and doing
+ * ugly things with interrupts.
+ * - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
+ * - Update to new network API (softnet - 2.3.43) :
+ * o replace dev->tbusy (David + me)
+ * o replace dev->tstart (David + me)
+ * o remove dev->interrupt (David)
+ * o add SMP locking via spinlock in splxx (me)
+ * o add spinlock in interrupt handler (me)
+ * o use kernel watchdog instead of ours (me)
+ * o verify that all the changes make sense and work (me)
+ * - Re-sync kernel/pcmcia versions (not much actually)
+ * - A few other cleanups (David & me)...
+ *
+ * Changes made for release in 3.1.22 :
+ * ----------------------------------
+ * - Check that SMP works, remove annoying log message
+ *
+ * Changes made for release in 3.1.24 :
+ * ----------------------------------
+ * - Fix unfrequent card lockup when watchdog was reseting the hardware :
+ * o control first busy loop in wv_82593_cmd()
+ * o Extend spinlock protection in wv_hw_config()
+ *
* Wishes & dreams:
* ----------------
* - Cleanup and integrate the roaming code
@@ -368,6 +413,7 @@
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
+#include <linux/spinlock.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
@@ -384,7 +430,7 @@
#ifdef CONFIG_NET_PCMCIA_RADIO
#include <linux/wireless.h> /* Wireless extensions */
-#endif /* CONFIG_NET_PCMCIA_RADIO */
+#endif
/* Pcmcia headers that we need */
#include <pcmcia/cs_types.h>
@@ -437,7 +483,7 @@
#undef DEBUG_RX_INFO /* Header of the transmitted packet */
#undef DEBUG_RX_FAIL /* Normal failure conditions */
#define DEBUG_RX_ERROR /* Unexpected conditions */
-#undef DEBUG_PACKET_DUMP /* Dump packet on the screen */
+#undef DEBUG_PACKET_DUMP 32 /* Dump packet on the screen */
#undef DEBUG_IOCTL_TRACE /* Misc call by Linux */
#undef DEBUG_IOCTL_INFO /* Various debug info */
#define DEBUG_IOCTL_ERROR /* What's going wrong */
@@ -452,7 +498,7 @@
/************************ CONSTANTS & MACROS ************************/
#ifdef DEBUG_VERSION_SHOW
-static const char *version = "wavelan_cs.c : v21 (wireless extensions) 18/10/99\n";
+static const char *version = "wavelan_cs.c : v23 (SMP + wireless extensions) 20/12/00\n";
#endif
/* Watchdog temporisation */
@@ -557,9 +603,9 @@ typedef u_char mac_addr[WAVELAN_ADDR_SI
*/
struct net_local
{
- spinlock_t lock;
dev_node_t node; /* ???? What is this stuff ???? */
device * dev; /* Reverse link... */
+ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
dev_link_t * link; /* pcmcia structure */
en_stats stats; /* Ethernet interface statistics */
int nresets; /* Number of hw resets */
@@ -568,9 +614,7 @@ struct net_local
u_char promiscuous; /* Promiscuous mode */
u_char allmulticast; /* All Multicast mode */
int mc_count; /* Number of multicast addresses */
- timer_list watchdog; /* To avoid blocking state */
- u_char status; /* Current i82593 status */
int stop; /* Current i82593 Stop Hit Register */
int rfp; /* Last DMA machine receive pointer */
int overrunning; /* Receiver overrun flag */
@@ -617,8 +661,14 @@ void wv_roam_cleanup(struct net_device *
#endif /* WAVELAN_ROAMING */
/* ----------------------- MISC SUBROUTINES ------------------------ */
+static inline void
+ wv_splhi(net_local *, /* Disable interrupts */
+ unsigned long *); /* flags */
+static inline void
+ wv_splx(net_local *, /* ReEnable interrupts */
+ unsigned long *); /* flags */
static void
- cs_error(client_handle_t, /* Report error to cardmgr */
+ cs_error(client_handle_t, /* Report error to cardmgr */
int,
int);
/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
@@ -722,16 +772,15 @@ static void
wv_flush_stale_links(void); /* "detach" all possible devices */
/* ---------------------- INTERRUPT HANDLING ---------------------- */
static void
-wavelan_interrupt(int, /* Interrupt handler */
- void *,
- struct pt_regs *);
+ wavelan_interrupt(int, /* Interrupt handler */
+ void *,
+ struct pt_regs *);
static void
- wavelan_watchdog(u_long); /* Transmission watchdog */
+ wavelan_watchdog(device *); /* Transmission watchdog */
/* ------------------- CONFIGURATION CALLBACKS ------------------- */
static int
wavelan_open(device *), /* Open the device */
- wavelan_close(device *), /* Close the device */
- wavelan_init(device *); /* Do nothing */
+ wavelan_close(device *); /* Close the device */
static dev_link_t *
wavelan_attach(void); /* Create a new device */
static void
@@ -744,11 +793,7 @@ static int
/**************************** VARIABLES ****************************/
static dev_info_t dev_info = "wavelan_cs";
-static dev_link_t *dev_list; /* Linked list of devices */
-
-/* WARNING : the following variable MUST be volatile
- * It is used by wv_82593_cmd to syncronise with wavelan_interrupt */
-static volatile int wv_wait_completed;
+static dev_link_t *dev_list = NULL; /* Linked list of devices */
/*
* Parameters that can be set with 'insmod'
@@ -761,7 +806,7 @@ static int irq_mask = 0xdeb8;
static int irq_list[4] = { -1 };
/* Shared memory speed, in ns */
-static int mem_speed;
+static int mem_speed = 0;
/* New module interface */
MODULE_PARM(irq_mask, "i");
@@ -770,9 +815,11 @@ MODULE_PARM(mem_speed, "i");
#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */
/* Enable roaming mode ? No ! Please keep this to 0 */
-static int do_roaming;
+static int do_roaming = 0;
MODULE_PARM(do_roaming, "i");
#endif /* WAVELAN_ROAMING */
+
+MODULE_LICENSE("GPL");
#endif /* WAVELAN_CS_H */
On Tue, Jan 15, 2002 at 06:55:27PM -0800, Linus Torvalds wrote:
>
> On Tue, 15 Jan 2002, Jean Tourrilhes wrote:
> >
> > On a related topic : I need to move 3 drivers that I maintain
> > (wavelan.c, wavelan_cs.c and netwave.c) into the directory
> > drivers/net/wireless.
> > Do you prefer a *huge* patch, or do you prefer (a small shell
> > script + a small patch) ?
>
> I'd prefer just the script + small patch, thanks.
>
> Linus
Hi,
This shell script and small patch move the 3 driver mentionned
above into the drivers/net/wireless directory (where they will
logically be with their other friends). It is supposed to operate like
this :
1) First, run the shell script from /usr/src/linux
2) Second, apply the patch
One of the "trick" of the operation is that two headers have
to be renamed because of conflicts between the Wavelan ISA and Pcmcia
drivers. Tested on 2.5.3-pre2.
Would you mind adding that in your kernel ?
Thanks...
Jean
P.S. : One more driver to move and I will be able to get rid of
CONFIG_NET_PCMCIA_RADIO from various places...
P.S.2 : Jeff : the trigraph patch will be next.
-----------------------------------------------------------------
#!/bin/sh
# Go in the proper directory. Modify as needed
#cd /usr/src/linux/
# Wavelan ISA driver
mv drivers/net/i82586.h drivers/net/wireless/
mv drivers/net/wavelan.h drivers/net/wireless/
mv drivers/net/wavelan.p.h drivers/net/wireless/
mv drivers/net/wavelan.c drivers/net/wireless/
# Wavelan Pcmcia driver
# Warning : Rename headers because of conflict with ISA driver
# We use the same conventions as the ISA driver, xxx.p.h is the private header
mv drivers/net/pcmcia/i82593.h drivers/net/wireless/
mv drivers/net/pcmcia/wavelan.h drivers/net/wireless/wavelan_cs.h
mv drivers/net/pcmcia/wavelan_cs.h drivers/net/wireless/wavelan_cs.p.h
mv drivers/net/pcmcia/wavelan_cs.c drivers/net/wireless/
# Netwave Pcmcia driver
mv drivers/net/pcmcia/netwave_cs.c drivers/net/wireless/
-----------------------------------------------------------------
diff -u -p -r linux/drivers/net-moved/Config.in linux/drivers/net/Config.in
--- linux/drivers/net-moved/Config.in Thu Jan 17 10:39:55 2002
+++ linux/drivers/net/Config.in Thu Jan 17 10:48:59 2002
@@ -292,7 +292,6 @@ comment 'Wireless LAN (non-hamradio)'
bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO
if [ "$CONFIG_NET_RADIO" = "y" ]; then
dep_tristate ' STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET
- tristate ' AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN
tristate ' Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN
tristate ' Aironet 4500/4800 series adapters' CONFIG_AIRONET4500
dep_tristate ' Aironet 4500/4800 ISA/PCI/PNP/365 support ' CONFIG_AIRONET4500_NONCS $CONFIG_AIRONET4500
diff -u -p -r linux/drivers/net-moved/Makefile linux/drivers/net/Makefile
--- linux/drivers/net-moved/Makefile Thu Jan 17 10:38:19 2002
+++ linux/drivers/net/Makefile Thu Jan 17 10:48:59 2002
@@ -166,7 +166,6 @@ obj-$(CONFIG_EEXPRESS) += eexpress.o
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
-obj-$(CONFIG_WAVELAN) += wavelan.o
obj-$(CONFIG_ARLAN) += arlan.o arlan-proc.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
diff -u -p -r linux/drivers/net-moved/pcmcia/Config.in linux/drivers/net/pcmcia/Config.in
--- linux/drivers/net-moved/pcmcia/Config.in Mon Nov 12 09:35:43 2001
+++ linux/drivers/net/pcmcia/Config.in Thu Jan 17 10:48:59 2002
@@ -28,8 +28,6 @@ if [ "$CONFIG_NET_PCMCIA" = "y" ]; then
bool ' Pcmcia Wireless LAN' CONFIG_NET_PCMCIA_RADIO
if [ "$CONFIG_NET_PCMCIA_RADIO" = "y" ]; then
dep_tristate ' Aviator/Raytheon 2.4MHz wireless support' CONFIG_PCMCIA_RAYCS $CONFIG_PCMCIA
- dep_tristate ' Xircom Netwave AirSurfer wireless support' CONFIG_PCMCIA_NETWAVE $CONFIG_PCMCIA
- dep_tristate ' AT&T/Lucent Wavelan wireless support' CONFIG_PCMCIA_WAVELAN $CONFIG_PCMCIA
dep_tristate ' Aironet 4500/4800 PCMCIA support' CONFIG_AIRONET4500_CS $CONFIG_AIRONET4500 $CONFIG_PCMCIA
fi
fi
diff -u -p -r linux/drivers/net-moved/pcmcia/Makefile linux/drivers/net/pcmcia/Makefile
--- linux/drivers/net-moved/pcmcia/Makefile Mon Nov 12 09:35:43 2001
+++ linux/drivers/net/pcmcia/Makefile Thu Jan 17 10:48:59 2002
@@ -27,8 +27,6 @@ obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o
# 16-bit wireless client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
-obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
-obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o
obj-$(CONFIG_AIRONET4500_CS) += aironet4500_cs.o
# Cardbus client drivers
diff -u -p -r linux/drivers/net-moved/wireless/Config.in linux/drivers/net/wireless/Config.in
--- linux/drivers/net-moved/wireless/Config.in Tue Oct 9 15:13:03 2001
+++ linux/drivers/net/wireless/Config.in Thu Jan 17 10:48:59 2002
@@ -2,6 +2,12 @@
# Wireless LAN device configuration
#
+comment 'Wireless ISA/PCI cards support'
+
+# Good old obsolete Wavelan.
+tristate ' AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support' CONFIG_WAVELAN
+
+# 802.11b cards
if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
tristate ' Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards' CONFIG_AIRO
fi
@@ -18,8 +24,13 @@ fi
# If Pcmcia is compiled in, offer Pcmcia cards...
if [ "$CONFIG_PCMCIA" != "n" ]; then
- comment 'Wireless Pcmcia cards support'
+ comment 'Wireless Pcmcia/Cardbus cards support'
+
+# Obsolete cards
+ dep_tristate ' Xircom Netwave AirSurfer Pcmcia wireless support' CONFIG_PCMCIA_NETWAVE $CONFIG_PCMCIA
+ dep_tristate ' AT&T/Lucent old Wavelan Pcmcia wireless support' CONFIG_PCMCIA_WAVELAN $CONFIG_PCMCIA
+# 802.11b cards
dep_tristate ' Hermes PCMCIA card support' CONFIG_PCMCIA_HERMES $CONFIG_HERMES
tristate ' Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards' CONFIG_AIRO_CS
fi
diff -u -p -r linux/drivers/net-moved/wireless/Makefile linux/drivers/net/wireless/Makefile
--- linux/drivers/net-moved/wireless/Makefile Tue Oct 9 15:13:03 2001
+++ linux/drivers/net/wireless/Makefile Thu Jan 17 10:48:59 2002
@@ -14,6 +14,11 @@ obj- :=
# Things that need to export symbols
export-objs := airo.o orinoco.o hermes.o
+# Obsolete cards
+obj-$(CONFIG_WAVELAN) += wavelan.o
+obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
+obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o
+
obj-$(CONFIG_HERMES) += orinoco.o hermes.o
obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
obj-$(CONFIG_APPLE_AIRPORT) += airport.o
diff -u -p -r linux/drivers/net-moved/wireless/netwave_cs.c linux/drivers/net/wireless/netwave_cs.c
--- linux/drivers/net-moved/wireless/netwave_cs.c Fri Oct 12 14:21:18 2001
+++ linux/drivers/net/wireless/netwave_cs.c Thu Jan 17 11:50:00 2002
@@ -61,7 +61,7 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
-#ifdef CONFIG_NET_PCMCIA_RADIO
+#ifdef CONFIG_NET_RADIO
#include <linux/wireless.h>
#endif
diff -u -p -r linux/drivers/net-moved/wireless/todo.txt linux/drivers/net/wireless/todo.txt
--- linux/drivers/net-moved/wireless/todo.txt Mon May 7 19:42:14 2001
+++ linux/drivers/net/wireless/todo.txt Thu Jan 17 10:48:59 2002
@@ -4,21 +4,26 @@
1) Bring other kernel Wireless LAN drivers here
Already done :
o hermes.c/orinoco.c -> Wavelan IEEE driver + Airport driver
- Drivers I have control over :
+ o airo.c/airo_cs.c -> Ben's Aironet driver
o wavelan.c -> old Wavelan ISA driver
- o wavelan_cs.c -> old Wavelan Pcmcia driver (warning : header)
+ o wavelan_cs.c -> old Wavelan Pcmcia driver
o netwave_cs.c -> Netwave Pcmcia driver
Drivers likely to go :
o ray_cs.c -> Raytheon/Aviator driver (maintainer MIA)
Drivers I have absolutely no control over :
o arlan.c -> old Aironet Arlan 655 (need to ask Elmer)
o aironet4500_xxx.c -> Elmer's Aironet driver (need to ask Elmer)
- o airo.c/airo_cs.c -> Ben's Aironet driver (not yet in kernel)
o strip.c -> Metricom's stuff. Not a wlan. Hum...
ETA : Kernel 2.5.X
2) Bring new Wireless LAN driver not yet in the kernel there
See my web page for details
+
+3) Misc
+ o Mark wavelan, wavelan_cs, netwave_cs drivers as obsolete
+ o Maybe arlan.c, ray_cs.c and strip.c also deserve to be obsolete
+ o Use new Probe/module stuff in wavelan.c
+ o New Wireless Extension API (pending)
Jean II
diff -u -p -r linux/drivers/net-moved/wireless/wavelan_cs.c linux/drivers/net/wireless/wavelan_cs.c
--- linux/drivers/net-moved/wireless/wavelan_cs.c Thu Jan 17 10:41:15 2002
+++ linux/drivers/net/wireless/wavelan_cs.c Thu Jan 17 10:48:59 2002
@@ -4,7 +4,7 @@
* Jean II - HPLB '96
*
* Reorganisation and extension of the driver.
- * Original copyright follow. See wavelan_cs.h for details.
+ * Original copyright follow. See wavelan_cs.p.h for details.
*
* This code is derived from Anthony D. Joseph's code and all the changes here
* are also under the original copyright below.
@@ -56,7 +56,7 @@
*
*/
-#include "wavelan_cs.h" /* Private header */
+#include "wavelan_cs.p.h" /* Private header */
/************************* MISC SUBROUTINES **************************/
/*
diff -u -p -r linux/drivers/net-moved/wireless/wavelan_cs.h linux/drivers/net/wireless/wavelan_cs.h
--- linux/drivers/net-moved/wireless/wavelan_cs.h Thu Jan 17 10:41:15 2002
+++ linux/drivers/net/wireless/wavelan_cs.h Thu Jan 17 10:48:59 2002
@@ -52,8 +52,8 @@
* Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
*/
-#ifndef _WAVELAN_H
-#define _WAVELAN_H
+#ifndef _WAVELAN_CS_H
+#define _WAVELAN_CS_H
/************************** MAGIC NUMBERS ***************************/
@@ -383,4 +383,4 @@ typedef union mm_t
struct mmr_t r; /* Read from the mmc */
} mm_t;
-#endif /* _WAVELAN_H */
+#endif /* _WAVELAN_CS_H */
diff -u -p -r linux/drivers/net-moved/wireless/wavelan_cs.p.h linux/drivers/net/wireless/wavelan_cs.p.h
--- linux/drivers/net-moved/wireless/wavelan_cs.p.h Thu Jan 17 10:41:15 2002
+++ linux/drivers/net/wireless/wavelan_cs.p.h Thu Jan 17 11:49:42 2002
@@ -10,8 +10,8 @@
* be included only on wavelan_cs.c !!!
*/
-#ifndef WAVELAN_CS_H
-#define WAVELAN_CS_H
+#ifndef WAVELAN_CS_P_H
+#define WAVELAN_CS_P_H
/************************** DOCUMENTATION **************************/
/*
@@ -76,7 +76,7 @@
* The detection code of the wavelan chech that the first 3
* octets of the MAC address fit the company code. This type of
* detection work well for AT&T cards (because the AT&T code is
- * hardcoded in wavelan.h), but of course will fail for other
+ * hardcoded in wavelan_cs.h), but of course will fail for other
* manufacturer.
*
* If you are sure that your card is derived from the wavelan,
@@ -86,7 +86,7 @@
* b) With the driver :
* o compile the kernel with DEBUG_CONFIG_INFO enabled
* o Boot and look the card messages
- * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
+ * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h)
* 3) Compile & verify
* 4) Send me the MAC code - I will include it in the next version...
*
@@ -111,9 +111,9 @@
/*
* wavelan_cs.c : The actual code for the driver - C functions
*
- * wavelan_cs.h : Private header : local types / vars for the driver
+ * wavelan_cs.p.h : Private header : local types / vars for the driver
*
- * wavelan.h : Description of the hardware interface & structs
+ * wavelan_cs.h : Description of the hardware interface & structs
*
* i82593.h : Description if the Ethernet controller
*/
@@ -428,7 +428,7 @@
#include <linux/ioport.h>
#include <linux/fcntl.h>
-#ifdef CONFIG_NET_PCMCIA_RADIO
+#ifdef CONFIG_NET_RADIO
#include <linux/wireless.h> /* Wireless extensions */
#endif
@@ -443,7 +443,7 @@
/* Wavelan declarations */
#include "i82593.h" /* Definitions for the Intel chip */
-#include "wavelan.h" /* Others bits of the hardware */
+#include "wavelan_cs.h" /* Others bits of the hardware */
/************************** DRIVER OPTIONS **************************/
/*
@@ -821,5 +821,5 @@ MODULE_PARM(do_roaming, "i");
MODULE_LICENSE("GPL");
-#endif /* WAVELAN_CS_H */
+#endif /* WAVELAN_CS_P_H */
looks ok to me
--
Jeff Garzik | "If you notice the scheduler,
Building 1024 | you need more processors."
MandrakeSoft | - me