The following patch is necessary to compile ALSA with YMFPCI support
on 2.5.5, at least in the following configuration:
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_YMFPCI=m
Even if my soundcard appears to work properly (using oss emulation), ALSA
people will probably want to double-check this fix however...
Stelian.
===== sound/core/seq/Makefile 1.1 vs edited =====
--- 1.1/sound/core/seq/Makefile Wed Feb 13 20:32:02 2002
+++ edited/sound/core/seq/Makefile Wed Feb 20 12:18:36 2002
@@ -76,7 +76,7 @@
obj-$(CONFIG_SND_CS46XX) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o
obj-$(CONFIG_SND_EMU10K1) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-virmidi.o
obj-$(CONFIG_SND_TRIDENT) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-instr.o
-obj-$(CONFIG_SND_YMFPCI) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o
+obj-$(CONFIG_SND_YMFPCI) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-instr.o
include $(TOPDIR)/Rules.make
===== sound/core/seq/instr/Makefile 1.1 vs edited =====
--- 1.1/sound/core/seq/instr/Makefile Wed Feb 13 20:32:02 2002
+++ edited/sound/core/seq/instr/Makefile Wed Feb 20 12:22:24 2002
@@ -44,6 +44,7 @@
obj-$(CONFIG_SND_FM801) += snd-ainstr-fm.o
obj-$(CONFIG_SND_SONICVIBES) += snd-ainstr-fm.o
obj-$(CONFIG_SND_TRIDENT) += snd-ainstr-simple.o
+obj-$(CONFIG_SND_YMFPCI) += snd-ainstr-fm.o
include $(TOPDIR)/Rules.make
--
Stelian Pop <[email protected]>
Alcove - http://www.alcove.com