This patch adds help texts for CONFIG_SERIAL_TX3912,
CONFIG_SERIAL_TX3912_CONSOLE, CONFIG_AU1000_SERIAL_CONSOLE,
CONFIG_AU1000_UART, CONFIG_EUROTECH_WDT to drivers/char/Config.help.
Steven
--- linux-2.5.5-dj1/drivers/char/Config.help.orig Mon Feb 25 08:55:03 2002
+++ linux-2.5.5-dj1/drivers/char/Config.help Mon Feb 25 09:30:35 2002
@@ -425,6 +425,24 @@
read <file:Documentation/modules.txt>. The module will be called
istallion.o.
+CONFIG_SERIAL_TX3912
+ The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
+ see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
+ Say Y here to enable kernel support for the on-board serial port.
+
+CONFIG_SERIAL_TX3912_CONSOLE
+ The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
+ see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
+ Say Y here to direct console I/O to the on-board serial port.
+
+CONFIG_AU1000_SERIAL_CONSOLE
+ If you have an Alchemy AU1000 processor (MIPS based) and you want
+ to use a console on a serial port, say Y. Otherwise, say N.
+
+CONFIG_AU1000_UART
+ If you have an Alchemy AU1000 processor (MIPS based) and you want
+ to use serial ports, say Y. Otherwise, say N.
+
CONFIG_SYNCLINK
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
@@ -942,6 +960,11 @@
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
+CONFIG_EUROTECH_WDT
+ Enable support for the watchdog timer on the Eurotech CPU-1220 and
+ CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product
+ information are at <http://www.eurotech.it/>.
+
CONFIG_IB700_WDT
This is the driver for the hardware watchdog on the IB700 Single
Board Computer produced by TMC Technology (http://www.tmc-uk.com). This watchdog