hi
Reading > 2^31bytes files, results in Linux reporting extremely low size -
typically <10MB. Putting the same DVD disc into a Windoze box works fine.
Anyone have any ideas?
I'm running 2.4.18-rc2
roy
--
Roy Sigurd Karlsbakk, Datavaktmester
Computers are like air conditioners.
They stop working when you open Windows.
On Feb 26, 2002 15:53 +0100, Roy Sigurd Karlsbakk wrote:
> Reading > 2^31bytes files, results in Linux reporting extremely low size -
> typically <10MB. Putting the same DVD disc into a Windoze box works fine.
>
> Anyone have any ideas?
Are you mounting it as UDF or as ISO? You should use UDF for DVD discs.
Cheers, Andreas
--
Andreas Dilger
http://sourceforge.net/projects/ext2resize/
http://www-mddsp.enel.ucalgary.ca/People/adilger/
> > Anyone have any ideas?
>
> Are you mounting it as UDF or as ISO? You should use UDF for DVD discs.
Linux auto-mounted it as ISO. I'll try UDF
--
Roy Sigurd Karlsbakk, Datavaktmester
Computers are like air conditioners.
They stop working when you open Windows.
> Are you mounting it as UDF or as ISO? You should use UDF for DVD discs.
is UDF backwards compatible with ISO, or should I mount CDROMs
specifically as ISO?
--
Roy Sigurd Karlsbakk, Datavaktmester
Computers are like air conditioners.
They stop working when you open Windows.
On Feb 27, 2002 13:36 +0100, Roy Sigurd Karlsbakk wrote:
> > Are you mounting it as UDF or as ISO? You should use UDF for DVD discs.
>
> is UDF backwards compatible with ISO, or should I mount CDROMs
> specifically as ISO?
Sorry, I don't know for sure. You could always try mounting them as ISO.
What I did in the end was to have two symlinks (/dev/cdrom and /dev/dvd)
pointing to the same device (/dev/hdc) and then in /etc/fstab put in a
different fs type for each device.
Cheers, Andreas
--
Andreas Dilger
http://sourceforge.net/projects/ext2resize/
http://www-mddsp.enel.ucalgary.ca/People/adilger/
On Wed, Feb 27, 2002 at 01:36:36PM +0100, Roy Sigurd Karlsbakk wrote:
> > Are you mounting it as UDF or as ISO? You should use UDF for DVD discs.
>
> is UDF backwards compatible with ISO
No.