This patch adds help texts for the following nine options
to sound/oss/Config.help. The texts were obtained from
Eric Raymond's Configure.help v2.97.
Steven
CONFIG_SOUND_VRC5477
CONFIG_SC6600_CDROM
CONFIG_SOUND_CMPCI_FM
CONFIG_SOUND_CMPCI_FMIO
CONFIG_SOUND_CMPCI_MIDI
CONFIG_SOUND_CMPCI_MPUIO
CONFIG_SOUND_CMPCI_SPDIFINVERSE
CONFIG_SOUND_CMPCI_LINE_REAR
CONFIG_SOUND_CMPCI_LINE_BASS
--- linux-2.5.5-dj2/sound/oss/Config.help.orig Thu Feb 28 08:06:58 2002
+++ linux-2.5.5-dj2/sound/oss/Config.help Thu Feb 28 08:24:45 2002
@@ -192,6 +192,11 @@
<file:Documentation/sound/vwsnd> for more info on this driver's
capabilities.
+CONFIG_SOUND_VRC5477
+ Say Y here to enable sound support for the NEC Vrc5477 chip, an
+ integrated, multi-function controller chip for MIPS CPUs. Works
+ with the AC97 codec.
+
CONFIG_SOUND_SSCAPE
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
@@ -476,6 +481,11 @@
Say Y here in order to use the joystick interface of the Audio Excel
DSP 16 card.
+CONFIG_SC6600_CDROM
+ This is used to activate the CD-ROM interface of the Audio Excel
+ DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
+ CD-ROM present.
+
CONFIG_SC6600_CDROMBASE
Base I/O port address for the CD-ROM interface of the Audio Excel
DSP 16 card.
@@ -498,6 +508,34 @@
chips is available at
<http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+CONFIG_SOUND_CMPCI_FM
+ Say Y here to enable the legacy FM (frequency-modulation) synthesis
+ support on a card using the CMI8338 or CMI8378 chipset.
+
+CONFIG_SOUND_CMPCI_FMIO
+ Set the base I/O address for FM synthesis control on a card using
+ the CMI8338 or CMI8378 chipset.
+
+CONFIG_SOUND_CMPCI_MIDI
+ Say Y here to enable the legacy MP401 MIDI synthesis support on a
+ card using the CMI8338 or CMI8378 chipset.
+
+CONFIG_SOUND_CMPCI_MPUIO
+ Set the base I/O address for MP401 MIDI synthesis control on a card
+ using the CMI8338 or CMI8378 chipset.
+
+CONFIG_SOUND_CMPCI_SPDIFINVERSE
+ Say Y here to have the driver invert the signal presented on SPDIF IN
+ of s card using the CMI8338 or CMI8378 chipset.
+
+CONFIG_SOUND_CMPCI_LINE_REAR
+ Say Y here to enable using line-in jack as an output jack for a rear
+ speaker.
+
+CONFIG_SOUND_CMPCI_LINE_BASS
+ Say Y here to enable using line-in jack as an output jack for a bass
+ speaker.
+
CONFIG_SOUND_CMPCI_CM8738
Say Y or M if you have a PCI sound card using the CMI8338
or the CMI8378 chipset. Data on this chip is available at
> +CONFIG_SOUND_CMPCI_SPDIFINVERSE
> + Say Y here to have the driver invert the signal presented on SPDIF IN
> + of s card using the CMI8338 or CMI8378 chipset.
^^^
a card ?