Hi,
Here is 2.4.19-pre2: A very big patch (around 13MB uncompressed) due to
the architecture (MIPS and IA64 mainly) updates.
Ralf and David: Please check if the merges have been done correctly (eg
no new files missing).
pre2:
- -ac merge (Alan Cox)
- Huge MIPS/MIPS64 merge (Ralf Baechle)
- IA64 update (David Mosberger)
- PPC update (Tom Rini)
- Shrink struct page (Rik van Riel)
- QNX4 update (now its able to mount QNX 6.1 fses) (Anders Larsen)
- Make max_map_count sysctl configurable (Christoph Hellwig)
- matroxfb update (Petr Vandrovec)
- ymfpci update (Pete Zaitcev)
- LVM update (Heinz J. Mauelshagen)
- btaudio driver update (Gerd Knorr)
- bttv update (Gerd Knorr)
- Out of line code cleanup (Keith Owens)
- Add watchdog API documentation (Christer Weinigel)
- Rivafb update (Ani Joshi)
- Enable PCI buses above quad0 on NUMA-Q (Martin J. Bligh)
- Fix PIIX IDE slave PCI timings (Dave Bogdanoff)
- Make PLIP work again (Tim Waugh)
- Remove unecessary printk from lp.c (Tim Waugh)
- Make parport_daisy_select work for ECP/EPP modes (Max Vorobiev)
- Support O_NONBLOCK on lp/ppdev correctly (Tim Waugh)
- Add PCI card hooks to parport (Tim Waugh)
- Compaq cciss driver fixes (Stephen Cameron)
- VFS cleanups and fixes (Alexander Viro)
- USB update (including USB 2.0 support) (Greg KH)
- More jiffies compare cleanups (Tim Schmielau)
- PCI hotplug update (Greg KH)
- bluesmoke fixes (Dave Jones)
- Fix off-by-one in ide-scsi (John Fremlin)
- Fix warnings in make xconfig (Ren? Scharfe)
- Make x86 MCE a configure option (Paul Gortmaker)
- Small ramdisk fixes (Christoph Hellwig)
- Add missing atime update to pipe code (Christoph Hellwig)
- Serialize microcode access (Tigran Aivazian)
- AMD Elan handling on serial.c (Robert Schwebel)
pre1:
- Add tape support to cciss driver (Stephen Cameron)
- Add Permedia3 fb driver (Romain Dolbeau)
- meye driver update (Stelian Pop)
- opl3sa2 update (Zwane Mwaikambo)
- JFFS2 update (David Woodhouse)
- NBD deadlock fix (Steven Whitehouse)
- Correct sys_shmdt() return value on failure (Adam Bottchen)
- Apply the SET_PERSONALITY patch missing from 2.4.18 (me)
- Alpha update (Jay Estabrook)
- SPARC64 update (David S. Miller)
- Fix potential blk freelist corruption (Jens Axboe)
- Fix potential hpfs oops (Chris Mason)
- get_request() starvation fix (Andrew Morton)
- cramfs update (Daniel Quinlan)
- Allow binfmt_elf as module (Paul Gortmaker)
- ymfpci Configure.help update (Pete Zaitcev)
- Backout one eepro100 change made in 2.4.18: it
was causing slowdowns on some cards (Jeff Garzik)
- Tridentfb compilation fix (Jani Monoses)
- Fix refcounting of directories on renames in tmpfs (Christoph Rohland)
- Add Fujitsu notebook to broken APM implementation
blacklist (Arjan Van de Ven)
- "do { ... } while(0)" cleanups on some fb drivers (Geert Uytterhoeven)
- Fix natsemi's ETHTOOL_GLINK ioctl (Tim Hockin)
- Fix clik! drive detection code in ide-floppy (Paul Bristow)
- Add additional support for the 82801 I/O controller (Wim Van Sebroeck)
- Remove duplicates in pci_ids.h (Wim Van Sebroeck)
Marcelo Tosatti wrote:
> Here is 2.4.19-pre2: A very big patch (around 13MB uncompressed) due to
Practically everything module is built.
gcc -D__KERNEL__ -I/data2/usr/local/src/linux-2.4-pre/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
-march=i686 -malign-functions=4 -DMODULE -DMODVERSIONS -include
/data2/usr/local/src/linux-2.4-pre/include/linux/modversions.h
-DKBUILD_BASENAME=cciss -c -o cciss.o cciss.c
cciss.c: In function `cciss_remove_one':
cciss.c:2129: too few arguments to function `sendcmd'
make[2]: *** [cciss.o] Error 1
make[2]: Leaving directory
`/data2/usr/local/src/linux-2.4-pre/drivers/block'
--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>
On Thu, 28 Feb 2002, Marcelo Tosatti wrote:
> Here is 2.4.19-pre2: A very big patch (around 13MB uncompressed) due to
> the architecture (MIPS and IA64 mainly) updates.
Does this MIPS merge mean that the 2.4.19-pre2 kernel would work on a MIPS
based Cobalt Qube 2? It that's the case, then I just need a working
userland.
The official Linux kernel from Cobalt is 2.0 vintage. I'm currently
running NetBSD 1.5.2 to have something a little more modern, but I would
like to come back to Linux if possible.
Dax
On Thu, Feb 28, 2002 at 09:18:30PM -0700, Dax Kelson wrote:
> > Here is 2.4.19-pre2: A very big patch (around 13MB uncompressed) due to
> > the architecture (MIPS and IA64 mainly) updates.
>
> Does this MIPS merge mean that the 2.4.19-pre2 kernel would work on a MIPS
> based Cobalt Qube 2? It that's the case, then I just need a working
> userland.
>
> The official Linux kernel from Cobalt is 2.0 vintage. I'm currently
> running NetBSD 1.5.2 to have something a little more modern, but I would
> like to come back to Linux if possible.
The MIPS merge still isn't complete, this was just the bulk part. So such
I haven't even tried to build let alone test Marcelo's -pre2 kernel. If
you want a 2.4.18 kernel for a Qube, get it via anonymous CVS. See the
MIPS HOWTO at http://oss.sgi.com/mips/mips-howto.html.
Ralf
--
"Embrace, Enhance, Eliminate" - it worked for the pope, it'll work for Bill.
On Fri, Mar 01 2002, Eyal Lebedinsky wrote:
> Marcelo Tosatti wrote:
> > Here is 2.4.19-pre2: A very big patch (around 13MB uncompressed) due to
>
> Practically everything module is built.
>
> gcc -D__KERNEL__ -I/data2/usr/local/src/linux-2.4-pre/include -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
> -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
> -march=i686 -malign-functions=4 -DMODULE -DMODVERSIONS -include
> /data2/usr/local/src/linux-2.4-pre/include/linux/modversions.h
> -DKBUILD_BASENAME=cciss -c -o cciss.o cciss.c
> cciss.c: In function `cciss_remove_one':
> cciss.c:2129: too few arguments to function `sendcmd'
> make[2]: *** [cciss.o] Error 1
> make[2]: Leaving directory
> `/data2/usr/local/src/linux-2.4-pre/drivers/block'
A few cciss updates are still pending, so these will disappear for the
next -pre.
--
Jens Axboe
Hello Ralf , Where in the FAQ does it describe how to get from
CVS the necessary components for a MIPsel kernel from CVS or do
you just grab the whole kernel ? Also the URL:
ftp://intel.cleveland.lug.net/pub/Mipsel
appears to not allow anon access anylonger . Tia , JimL
ie:
$ ncftp ftp://intel.cleveland.lug.net/pub/Mipsel
NcFTP 3.0.2 (October 19, 2000) by Mike Gleason ([email protected]).
Connecting to 207.166.193.105...
ProFTPD 1.2.1 Server (ProFTPD Default Installation) [cleveland.lug.net]
Login incorrect.
On Fri, 1 Mar 2002, Ralf Baechle wrote:
> On Thu, Feb 28, 2002 at 09:18:30PM -0700, Dax Kelson wrote:
> > > Here is 2.4.19-pre2: A very big patch (around 13MB uncompressed) due to
> > > the architecture (MIPS and IA64 mainly) updates.
> > Does this MIPS merge mean that the 2.4.19-pre2 kernel would work on a MIPS
> > based Cobalt Qube 2? It that's the case, then I just need a working
> > userland.
> > The official Linux kernel from Cobalt is 2.0 vintage. I'm currently
> > running NetBSD 1.5.2 to have something a little more modern, but I would
> > like to come back to Linux if possible.
> The MIPS merge still isn't complete, this was just the bulk part. So such
> I haven't even tried to build let alone test Marcelo's -pre2 kernel. If
> you want a 2.4.18 kernel for a Qube, get it via anonymous CVS. See the
> MIPS HOWTO at http://oss.sgi.com/mips/mips-howto.html.
> Ralf
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | P.O. Box 854 | Give me Linux |
| [email protected] | Coudersport PA 16915 | only on AXP |
+------------------------------------------------------------------+