Hi,
XFree86-4.2.0 is out. Would the dri kernel modules for
XFree86-4.2.0 be included into the kernel ? I can
not have 3D running wiht the modules for XFree86-4.1.0
while running 4.2.0.
Regards,
=====
Steve Kieu
http://movies.yahoo.com.au - Yahoo! Movies
- Vote for your nominees in our online Oscars pool.
> XFree86-4.2.0 is out. Would the dri kernel modules for
> XFree86-4.2.0 be included into the kernel ? I can
> not have 3D running wiht the modules for XFree86-4.1.0
> while running 4.2.0.
All the modules should be compatible, except for the I830M which requires
a new module not in XFree 4.1/DRM 4.1
The 4.2 modules are merged in 2.4.19-ac, but have rmap dependancies so I
can't push my versions on to Marcelo.
Alan
Hi,
> All the modules should be compatible, except for the
> I830M which requires
> a new module not in XFree 4.1/DRM 4.1
>
> The 4.2 modules are merged in 2.4.19-ac, but have
Sorry, this problem is with 2.4.19-pre3-jp8 kernel.
With 2.4.19-pre2-ac4 it is fine. I dont know why ;
here is from the log file
EE) I810(0): [dri] I810DRIScreenInit failed because of
a version mismatch.
[dri] i810.o kernel module version is 1.1.0 but
version 1.2 or greater is needed.
[dri] Disabling DRI.
(EE) I810(0): [drm] failed to remove DRM signal
handler
(II) I810(0): [drm] removed 1 reserved context for
kernel
DRIUnlock called when not locked
(II) I810(0): [drm] unmapping 8192 bytes of SAREA
0xc88c2000 at 0x40017000
(==) I810(0): Write-combining range
(0xd8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0,
hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 40.0 MHz [ 0x8 0x1
0x30 ] [ 10 3 3 ]
(II) I810(0): chose watermark 0x22007000: (tab.freq
40.0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of
1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical mem
ory available for 4194304 bytes of DCACHE
=====
Steve Kieu
http://movies.yahoo.com.au - Yahoo! Movies
- Vote for your nominees in our online Oscars pool.
> Sorry, this problem is with 2.4.19-pre3-jp8 kernel.
> With 2.4.19-pre2-ac4 it is fine. I dont know why ;
> here is from the log file
Ok so 4.2 really does want a newer DRM module than 4.1. 4.1 works with
the 4.2 modules.
The -ac tree has an rmapified 4.2 DRM so that one would work. 4.2 DRM for
older 2.4 (needs some clean up for current 2.4) is in the XFree86 CVS
or the tar balls from xfree86.org.