Hello,
somewhere between 2.4.17 and 2.4.18 the USB printing to the
HP printer using PTAL library broke. I now get following
in the log:
ptal-init: Starting the HP OfficeJet Linux driver.
ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:PSC_750>, pid=1183, errno=111
ptal-mlcd successfully initialized.
ptal-printd: ptal-printd(mlc:usb:PSC_750) successfully initialized.
rc: Starting ptal-init: succeeded
ptal-mlcd: ERROR at ExMgr.cpp:2445, dev=<usb:PSC_750>, pid=1183, errno=11
llioService: llioRead returns 3, expected=6!
ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:PSC_750>, pid=1183, errno=32
exClose(reason=0x0010)
Any idea what I should try to further corner the bug?
Red Hat 7.2
2.4.18 kernel
hpoj 0.8
hpijs 1.0
HP PSC 750 multifunctional device
alias usb-controller uhci
no devfs
Regards
--
Stano
On Fri, Mar 29, 2002, Stanislav Meduna <[email protected]> wrote:
> somewhere between 2.4.17 and 2.4.18 the USB printing to the
> HP printer using PTAL library broke. I now get following
> in the log:
>
> ptal-init: Starting the HP OfficeJet Linux driver.
> ptal-mlcd: SYSLOG at ExMgr.cpp:660, dev=<usb:PSC_750>, pid=1183, errno=111
> ptal-mlcd successfully initialized.
> ptal-printd: ptal-printd(mlc:usb:PSC_750) successfully initialized.
> rc: Starting ptal-init: succeeded
> ptal-mlcd: ERROR at ExMgr.cpp:2445, dev=<usb:PSC_750>, pid=1183, errno=11
> llioService: llioRead returns 3, expected=6!
> ptal-mlcd: ERROR at ExMgr.cpp:853, dev=<usb:PSC_750>, pid=1183, errno=32
> exClose(reason=0x0010)
>
> Any idea what I should try to further corner the bug?
>
> Red Hat 7.2
> 2.4.18 kernel
> hpoj 0.8
> hpijs 1.0
> HP PSC 750 multifunctional device
> alias usb-controller uhci
> no devfs
Give usb-uhci a shot. I'm curious if it works better.
Also, can you try the latest 2.4.19 pre patch (-pre4 I believe)?
JE
Hi,
> Give usb-uhci a shot. I'm curious if it works better.
>
> Also, can you try the latest 2.4.19 pre patch (-pre4 I believe)?
2.4.18, usb-uhci
does start to print, but the whole machine freezes a page or two
later (Alt-SysRq works). This was also the reason I chose uhci
some versions ago.
2.4.19-pre5, uhci
does not work. It appeared start to print (sucked the paper in),
but that was it
2.4.19-pre5, usb-uhci
the machine does not even come up, the modprobe usb-uhci in the
boot scripts freezes
Regards
--
Stano