I have not yet checked to see if this happens with older kernels,
however I have a reproducible panic on attempting to access a DVD drive,
this one was from trying to mount a normal data-CD.
I am using the ide-scsi layer, but can test without it if needed.
Attached is the decoded panic, however it is not a complete panic due to
the length of the call trace, resulting in not having the code line.
(I used the printer for console output, and finally stopped it after 17
pages of call trace pointers.)
Also attached is the .config used for the kernel, and the dmesg output
from booting.
I will try without using the ide-scsi layer and with older kernels in a
few hours, if any additional information is needed please let me know.
Thanks.
Zephaniah E. Hull.
(Debian Developer.)
P.S.: The -c2 part of the kernel version just indicates compile 2, not
additional patches.
--
1024D/E65A7801 Zephaniah E. Hull <[email protected]>
92ED 94E4 B1E6 3624 226D 5727 4453 008B E65A 7801
CCs of replies from mailing lists are requested.
...and the burnt fool's bandaged finger goes wobbling back to the fire.
-- The Gods of the Copybook Headings, by Kippling.
On Fri, Apr 12, 2002 at 09:11:15PM -0400, Zephaniah E. Hull wrote:
> I will try without using the ide-scsi layer and with older kernels in a
> few hours, if any additional information is needed please let me know.
Ok, using ide-cd instead of ide-scsi for it does not work perfectly,
however it also does not crash.
warp@agamemnon:~$ mount /mnt/cd0
hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
warp@agamemnon:~$
warp@agamemnon:~$ ls /mnt/cd0/dosutils/
hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
README autoboot.bat fips15c/ gzip.exe rawrite.exe
restorrb.exe
TRANS.TBL copying fips20/ loadlin.exe rawrite3.doc
autoboot/ fips.exe fipsdocs/ lodlin16.tgz rdev.exe
warp@agamemnon:~$
This is clearly better, however it is obviously not ideal, any ideas?
Zephaniah E. Hull.
>
> Thanks.
>
> Zephaniah E. Hull.
> (Debian Developer.)
>
> P.S.: The -c2 part of the kernel version just indicates compile 2, not
> additional patches.
>
> --
> 1024D/E65A7801 Zephaniah E. Hull <[email protected]>
> 92ED 94E4 B1E6 3624 226D 5727 4453 008B E65A 7801
> CCs of replies from mailing lists are requested.
>
> ...and the burnt fool's bandaged finger goes wobbling back to the fire.
> -- The Gods of the Copybook Headings, by Kippling.
--
1024D/E65A7801 Zephaniah E. Hull <[email protected]>
92ED 94E4 B1E6 3624 226D 5727 4453 008B E65A 7801
CCs of replies from mailing lists are requested.
* james would be more impressed if netgod's magic powers could stop the
splits in the first place...
* netgod notes debian developers are notoriously hard to impress
-- Seen on #Debian