[Please CC me in replies - not subscribed]
Hiya,
Thanks for the help on the usb OOPSs.
Now I have a problem with my network card in 2.5.10 - I cannot make it
ifup, although the link lights are on. 2.4.18 works fine with the card,
so it's not fitted wrong or anything.
Anyway, the error is as follows:
Linux Tulip driver version 1.1.12 (Mar 07, 2002)
PCI: Could not assign IRQ 21 to device 02:09.0
eth0: Lite-On PNIC-II rev 37 at 0xd4bcec00, 00:C0:F0:76:95:0A, IRQ 21.
PCI: Could not assign IRQ 22 to device 02:0a.0
The relevant part of lspci is:
02:09.0 Ethernet controller: Lite-On Communications INC LNE100TX [Linksys EtherFast 10/100] (rev 25)
I have tried compiling the tulip driver in and having it as a module,
but with the same results.
Attached are my config, and the log of bootup, with a bit of fiddling
with loading and unloading the module at the end.
Thankyou for serial consoles so I don't have to copy all the info by
hand!
Any more info needed, just ask.
Alex.
--
\\\\\\\\ Getting into trouble is easy. ////////
\\\\\\ -- D. Winkel and F. Prosser //////
\\\\ ////
\\ //