This patch adds new NFSv4-only error codes to include/linux/nfs.h,
and also indicates which of the old error codes still exist in NFSv4.
--- old/include/linux/nfs.h Wed Jul 24 16:03:22 2002
+++ new/include/linux/nfs.h Mon Jul 29 23:18:38 2002
@@ -39,39 +39,68 @@
* standard, but seem to be widely used nevertheless.
*/
enum nfs_stat {
- NFS_OK = 0, /* v2 v3 */
- NFSERR_PERM = 1, /* v2 v3 */
- NFSERR_NOENT = 2, /* v2 v3 */
- NFSERR_IO = 5, /* v2 v3 */
- NFSERR_NXIO = 6, /* v2 v3 */
+ NFS_OK = 0, /* v2 v3 v4 */
+ NFSERR_PERM = 1, /* v2 v3 v4 */
+ NFSERR_NOENT = 2, /* v2 v3 v4 */
+ NFSERR_IO = 5, /* v2 v3 v4 */
+ NFSERR_NXIO = 6, /* v2 v3 v4 */
NFSERR_EAGAIN = 11, /* v2 v3 */
- NFSERR_ACCES = 13, /* v2 v3 */
- NFSERR_EXIST = 17, /* v2 v3 */
- NFSERR_XDEV = 18, /* v3 */
- NFSERR_NODEV = 19, /* v2 v3 */
- NFSERR_NOTDIR = 20, /* v2 v3 */
- NFSERR_ISDIR = 21, /* v2 v3 */
- NFSERR_INVAL = 22, /* v2 v3 that Sun forgot */
- NFSERR_FBIG = 27, /* v2 v3 */
- NFSERR_NOSPC = 28, /* v2 v3 */
- NFSERR_ROFS = 30, /* v2 v3 */
- NFSERR_MLINK = 31, /* v3 */
+ NFSERR_ACCES = 13, /* v2 v3 v4 */
+ NFSERR_EXIST = 17, /* v2 v3 v4 */
+ NFSERR_XDEV = 18, /* v3 v4 */
+ NFSERR_NODEV = 19, /* v2 v3 v4 */
+ NFSERR_NOTDIR = 20, /* v2 v3 v4 */
+ NFSERR_ISDIR = 21, /* v2 v3 v4 */
+ NFSERR_INVAL = 22, /* v2 v3 v4 */
+ NFSERR_FBIG = 27, /* v2 v3 v4 */
+ NFSERR_NOSPC = 28, /* v2 v3 v4 */
+ NFSERR_ROFS = 30, /* v2 v3 v4 */
+ NFSERR_MLINK = 31, /* v3 v4 */
NFSERR_OPNOTSUPP = 45, /* v2 v3 */
- NFSERR_NAMETOOLONG = 63, /* v2 v3 */
- NFSERR_NOTEMPTY = 66, /* v2 v3 */
- NFSERR_DQUOT = 69, /* v2 v3 */
- NFSERR_STALE = 70, /* v2 v3 */
+ NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */
+ NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */
+ NFSERR_DQUOT = 69, /* v2 v3 v4 */
+ NFSERR_STALE = 70, /* v2 v3 v4 */
NFSERR_REMOTE = 71, /* v2 v3 */
NFSERR_WFLUSH = 99, /* v2 */
- NFSERR_BADHANDLE = 10001, /* v3 */
+ NFSERR_BADHANDLE = 10001, /* v3 v4 */
NFSERR_NOT_SYNC = 10002, /* v3 */
- NFSERR_BAD_COOKIE = 10003, /* v3 */
- NFSERR_NOTSUPP = 10004, /* v3 */
- NFSERR_TOOSMALL = 10005, /* v3 */
- NFSERR_SERVERFAULT = 10006, /* v3 */
- NFSERR_BADTYPE = 10007, /* v3 */
- NFSERR_JUKEBOX = 10008 /* v3 */
- };
+ NFSERR_BAD_COOKIE = 10003, /* v3 v4 */
+ NFSERR_NOTSUPP = 10004, /* v3 v4 */
+ NFSERR_TOOSMALL = 10005, /* v3 v4 */
+ NFSERR_SERVERFAULT = 10006, /* v3 v4 */
+ NFSERR_BADTYPE = 10007, /* v3 v4 */
+ NFSERR_JUKEBOX = 10008, /* v3 v4 */
+ NFSERR_SAME = 10009, /* v4 */
+ NFSERR_DENIED = 10010, /* v4 */
+ NFSERR_EXPIRED = 10011, /* v4 */
+ NFSERR_LOCKED = 10012, /* v4 */
+ NFSERR_GRACE = 10013, /* v4 */
+ NFSERR_FHEXPIRED = 10014, /* v4 */
+ NFSERR_SHARE_DENIED = 10015, /* v4 */
+ NFSERR_WRONGSEC = 10016, /* v4 */
+ NFSERR_CLID_INUSE = 10017, /* v4 */
+ NFSERR_RESOURCE = 10018, /* v4 */
+ NFSERR_MOVED = 10019, /* v4 */
+ NFSERR_NOFILEHANDLE = 10020, /* v4 */
+ NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */
+ NFSERR_STALE_CLIENTID = 10022, /* v4 */
+ NFSERR_STALE_STATEID = 10023, /* v4 */
+ NFSERR_OLD_STATEID = 10024, /* v4 */
+ NFSERR_BAD_STATEID = 10025, /* v4 */
+ NFSERR_BAD_SEQID = 10026, /* v4 */
+ NFSERR_NOT_SAME = 10027, /* v4 */
+ NFSERR_LOCK_RANGE = 10028, /* v4 */
+ NFSERR_SYMLINK = 10029, /* v4 */
+ NFSERR_READDIR_NOSPC = 10030, /* v4 */
+ NFSERR_LEASE_MOVED = 10031, /* v4 */
+ NFSERR_ATTRNOTSUPP = 10032, /* v4 */
+ NFSERR_NO_GRACE = 10033, /* v4 */
+ NFSERR_RECLAIM_BAD = 10034, /* v4 */
+ NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */
+ NFSERR_BAD_XDR = 10036, /* v4 */
+ NFSERR_LOCKS_HELD = 10037 /* v4 */
+};
/* NFSv2 file types - beware, these are not the same in NFSv3 */
Hello
Is anyone aware of usb drivers for the XIRCOM usb->serial adapters...
ashokr
Quoting Ashok Raj <[email protected]>:
> Is anyone aware of usb drivers for the XIRCOM usb->serial adapters...
You mean one of those?
USB Xircom / Entregra Single Port Serial Driver
CONFIG_USB_SERIAL_XIRCOM
Say Y here if you want to use a Xircom or Entregra single port USB to
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called keyspan_pda.o. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
Dmitri