This is part 20/26 of patchset for add support NEC PC-9800 architecture,
against 2.5.43.
Summary:
serial driver related modules.
- change IO port address and IRQ number.
- add new PNP device entry.
diffstat:
drivers/serial/8250_pnp.c | 7 +++++++
include/asm-i386/serial.h | 7 +++++++
2 files changed, 14 insertions(+)
patch:
diff -urN linux/drivers/serial/8250_pnp.c linux98/drivers/serial/8250_pnp.c
--- linux/drivers/serial/8250_pnp.c Sat Oct 12 13:21:04 2002
+++ linux98/drivers/serial/8250_pnp.c Sun Oct 13 21:02:23 2002
@@ -187,6 +187,8 @@
{ "MVX00A1", 0 },
/* PC Rider K56 Phone System PnP */
{ "MVX00F2", 0 },
+ /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
+ { "nEC8241", 0 },
/* Pace 56 Voice Internal Plug & Play Modem */
{ "PMC2430", 0 },
/* Generic */
@@ -379,7 +381,12 @@
((port->min == 0x2f8) ||
(port->min == 0x3f8) ||
(port->min == 0x2e8) ||
+#ifndef CONFIG_PC9800
(port->min == 0x3e8)))
+#else
+ (port->min == 0x3e8) ||
+ (port->min == 0x8b0)))
+#endif
return 0;
}
diff -urN linux/include/asm-i386/serial.h linux98/include/asm-i386/serial.h
--- linux/include/asm-i386/serial.h Wed Oct 16 12:27:56 2002
+++ linux98/include/asm-i386/serial.h Fri Oct 18 10:12:09 2002
@@ -50,12 +50,19 @@
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+#ifndef CONFIG_PC9800
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
+#else
+#define STD_SERIAL_PORT_DEFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x30, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x238, 5, STD_COM_FLAGS }, /* ttyS1 */
+#endif /* CONFIG_PC9800 */
#ifdef CONFIG_SERIAL_MANY_PORTS