Greetings,
I am trying to get the hpt372 ide to work (not as a raid).
I have tried 2.4.19 and with patch-2.4.20-pre11.
On boot, 'ide: lost interrupt' is printed, although the hpt372
is detected. Partitions on ide can be mounted but soon
fail with busy errors.
I tried Highpoints Linux driver. This seems to work but
uses the scsi interface. Other messages in the archive
suggest that the 372 should work.
Anybody got this to work?
TIA.
--
Ian Leonard
eMail: [email protected]
Phone: +44 (0)1865 765273
Please ignore spelling and punctuation - I did.
Use the -ac tree. (that is the long and short of it, until the bigwhig
hackers start paying attention to 2.4 users again and alan's tree full of
IDE goodness can be merged into marcelo's tree ;-))
--Brandon
Gentoo Linux Kernel Dude
On Fri, 10/25/02 at 11:15:04 +0100, Ian Leonard wrote:
> Greetings,
>
> I am trying to get the hpt372 ide to work (not as a raid).
> I have tried 2.4.19 and with patch-2.4.20-pre11.
>
> On boot, 'ide: lost interrupt' is printed, although the hpt372
> is detected. Partitions on ide can be mounted but soon
> fail with busy errors.
>
> I tried Highpoints Linux driver. This seems to work but
> uses the scsi interface. Other messages in the archive
> suggest that the 372 should work.
>
> Anybody got this to work?
>
> TIA.
>
> --
> Ian Leonard
> eMail: [email protected]
> Phone: +44 (0)1865 765273
>
> Please ignore spelling and punctuation - I did.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/