Hi,
i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
the ALI IDE Driver:
These are the last lines:
Unform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 80
pci_irq-0293 [05] acpi_pci_irq_derive : Unable to derive IRQ for device 00:10.0
PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
Kernel 2.4.19 + acpi backport + swsusp
Flo
--
Florian Lohoff [email protected] +49-5201-669912
Heisenberg may have been here.
On Sun, 2002-11-17 at 19:47, Florian Lohoff wrote:
>
> Hi,
> i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
> the ALI IDE Driver:
>
> These are the last lines:
>
> Unform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
> ALI15X3: IDE controller on PCI bus 00 dev 80
> pci_irq-0293 [05] acpi_pci_irq_derive : Unable to derive IRQ for device 00:10.0
> PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
> ALI15X3: chipset revision 196
> ALI15X3: not 100% native mode: will probe irqs later
Try it without the ACPI first. Let me know if that also hangs
On Sun, Nov 17, 2002 at 10:50:00PM +0000, Alan Cox wrote:
> On Sun, 2002-11-17 at 19:47, Florian Lohoff wrote:
> >
> > Hi,
> > i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
> > the ALI IDE Driver:
> >
> > These are the last lines:
> >
> > Unform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
> > ALI15X3: IDE controller on PCI bus 00 dev 80
> > pci_irq-0293 [05] acpi_pci_irq_derive : Unable to derive IRQ for device 00:10.0
> > PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
> > ALI15X3: chipset revision 196
> > ALI15X3: not 100% native mode: will probe irqs later
>
> Try it without the ACPI first. Let me know if that also hangs
It does - With acpi=off and acpi=off pci=biosirq (as mentioned in that
crash). I also tried the somewhere mentioned UDMA66 force (ide0=ata66
ide1=ata66) which does get over this point but fails to mount the root
filesystem with IDE errors.
Flo
--
Florian Lohoff [email protected] +49-5201-669912
Heisenberg may have been here.
On Mon, 2002-11-18 at 11:52, Florian Lohoff wrote:
> It does - With acpi=off and acpi=off pci=biosirq (as mentioned in that
> crash). I also tried the somewhere mentioned UDMA66 force (ide0=ata66
> ide1=ata66) which does get over this point but fails to mount the root
> filesystem with IDE errors.
That woukd make sense. The ALI driver in 2.4.19 supports only ALi
north/south properly, not Ali/Transmeta or Ali/ATI combinations.
2.4.20-ac should get Ali/Transmeta right and 2.5.47-ac now has test code
to avoid non legacy DMA on the ATI