Good evening!
Problem: the system hangs
The additional information: troubles with controller on hd (hardware problem)
After recompiling kernel 2.4.18 with patch 2.4.19 wtere was a trouble:
The system hangs after loading in place 'Partition check'. Fragment dmesg:
In kernel 2.4.19 it was so:
hda: WDC AC33200L, ATA DISK drive
hdc: SAMSUNG SV0511D, ATA DISK drive
hdd: SAMSUNG SCR-2430, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6346368 sectors (3249 MB) w/256KiB Cache, CHS=787/128/63, UDMA(33)
hdc: 9965088 sectors (5102 MB) w/472KiB Cache, CHS=9886/16/63, UDMA(33)
hdd: ATAPI 20X CD-ROM drive, 0kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1
hdc: /* hdc: <-- trouble */
In kernel 2.4.18 it was so:
hda: WDC AC33200L, ATA DISK drive
hdc: SAMSUNG SV0511D, ATA DISK drive
hdd: SAMSUNG SCR-2430, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6346368 sectors (3249 MB) w/256KiB Cache, CHS=787/128/63, UDMA(33)
hdc: 9965088 sectors (5102 MB) w/472KiB Cache, CHS=9886/16/63, UDMA(33)
hdd: ATAPI 20X CD-ROM drive, 0kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1
hdc:hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
[PTBL] [620/255/63] hdc1 hdc2 hdc3
hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
hdc: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
/*
# ...and so on...
#
# It works!!! Why does not work in 2.4.19 ???
*/
Other information that might be relevant to the problem:
root@electris (17:05:09):/# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Celeron (Covington)
stepping : 0
cpu MHz : 267.276
cache size : 32 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 532.48
root@electris (17:05:15):/# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:10.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 02)
00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 3a)
root@electris (17:29:18):/# cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
29 fb
109 lvm
128 ptm
129 ptm
136 pts
137 pts
162 raw
Block devices:
1 ramdisk
2 fd
3 ide0
7 loop
9 md
22 ide1
43 nbd
58 lvm
I hope I help you. :,)
On Wed, Nov 27, 2002 at 05:54:39PM +0200, [email protected] wrote:
> Problem: the system hangs
> The additional information: troubles with controller on hd (hardware problem)
you mean the kernel has to deal with broken hardware (the broken hdc)
in sane way instead of hanging, right?
> After recompiling kernel 2.4.18 with patch 2.4.19 wtere was a trouble:
> The system hangs after loading in place 'Partition check'. Fragment dmesg:
> hdc: SAMSUNG SV0511D, ATA DISK drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: /* hdc: <-- trouble */
>
> In kernel 2.4.18 it was so:
>
> hdc:hdc: timeout waiting for DMA
> ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hdc: drive not ready for command
> [PTBL] [620/255/63] hdc1 hdc2 hdc3
in case it's needed: "ide1=nodma" in kernel boot line.
Do you have intel piix support compiled in, btw?
> 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)