Hello,
I used to use usb under 2.4 with my Digital Ixus V with s10sh.
It worked just perfectly, now under 2.5.59, I don't even see the output
of a recongnize in the syslogd.
I have also tried gphoto2, which doesn't find any camera...
I have a MSI Max2-BLR motherboard with USB 2.0 on it:
lspci -v, the kernel config I use, /proc/bus/usb/devices, lsmod and dmesg
could be found under http://ulima.unil.ch/greg/linux/MAX2/
Should I provide some other info?
I could attach them if you prefer :-)
Should I change anything in my config?
Thank you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
On Sun, Feb 02 2003, Gregoire Favre wrote:
> Hello,
>
> I used to use usb under 2.4 with my Digital Ixus V with s10sh.
> It worked just perfectly, now under 2.5.59, I don't even see the output
> of a recongnize in the syslogd.
>
> I have also tried gphoto2, which doesn't find any camera...
Check that you have ohci/uhci in addition to the ehci controller, I just
spent an hour finding out why 1.x devices didn't work on my via board
(thanks David :)...
--
Jens Axboe
On Sun, Feb 02, 2003 at 03:06:43PM +0100, Jens Axboe wrote:
> > Hello,
> >
> > I used to use usb under 2.4 with my Digital Ixus V with s10sh.
> > It worked just perfectly, now under 2.5.59, I don't even see the output
> > of a recongnize in the syslogd.
> >
> > I have also tried gphoto2, which doesn't find any camera...
>
> Check that you have ohci/uhci in addition to the ehci controller, I just
> spent an hour finding out why 1.x devices didn't work on my via board
> (thanks David :)...
Well, yes I have it...as I put in
http://ulima.unil.ch/greg/linux/MAX2/lsmod-2.5.59
ehci_hcd 17792 0
ohci_hcd 12672 0
Thank you very much, all suggestion are greatly appreciated ;-)
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]