i have been trying to set up a cardbus card on my thinkpad 760ED for about
the last month and it keeps coming up with IRQ0 and telling me it cant find a
irq for pin A. what would be causing this and how do I correct it i have
already tried APCI and it does not work on my laptop so that is no help. I
have compiled SMP into the kernel though I dont have a dual processor (of
course) to gain the added functionality. I have recompiled my kernel about
150 times with different setting hoping it might just be a conflict in the
kernel with no luck. I looked at the yenta driver it's self and noticed that
it accepts IRQ0 as a valid irq but that appears to mean no irq at all. which
config file would i use to force it to set a irq?
Thanx for any assistanc you might give
<quote who="Robert Bisping">
> i have been trying to set up a cardbus card on my thinkpad 760ED for about the last
> month and it keeps coming up with IRQ0 and telling me it cant find a irq for pin A.
> what would be causing this and how do I correct it i have already tried APCI and it
> does not work on my laptop so that is no help. I have compiled SMP into the kernel
> though I dont have a dual processor (of course) to gain the added functionality. I
> have recompiled my kernel about 150 times with different setting hoping it might just
> be a conflict in the kernel with no luck. I looked at the yenta driver it's self and
> noticed that it accepts IRQ0 as a valid irq but that appears to mean no irq at all.
> which config file would i use to force it to set a irq?
>
>
> Thanx for any assistanc you might give
>
plz send an lspci -vv -xxx -s *your dev*
what kernel are you using ?
--
Emiliano Gabrielli
dip. di Fisica
2? Universit? di Roma "Tor Vergata"
On Friday 31 January 2003 08:50, you wrote:
> <quote who="Robert Bisping">
>
> > i have been trying to set up a cardbus card on my thinkpad 760ED for
> > about the last month and it keeps coming up with IRQ0 and telling me it
> > cant find a irq for pin A. what would be causing this and how do I
> > correct it i have already tried APCI and it does not work on my laptop
> > so that is no help. I have compiled SMP into the kernel though I dont
> > have a dual processor (of course) to gain the added functionality. I
> > have recompiled my kernel about 150 times with different setting hoping
> > it might just be a conflict in the kernel with no luck. I looked at the
> > yenta driver it's self and noticed that it accepts IRQ0 as a valid irq
> > but that appears to mean no irq at all. which config file would i use to
> > force it to set a irq?
> >
> >
> > Thanx for any assistanc you might give
>
> plz send an lspci -vv -xxx -s *your dev*
>
> what kernel are you using ?
i am using 2.4.18 and here is lspci
<quote who="Robert Bisping">
> On Friday 31 January 2003 08:50, you wrote:
>> <quote who="Robert Bisping">
>>
>> > i have been trying to set up a cardbus card on my thinkpad 760ED for about the
>> last month and it keeps coming up with IRQ0 and telling me it cant find a irq for
>> pin A. what would be causing this and how do I correct it i have already tried
>> APCI and it does not work on my laptop so that is no help. I have compiled SMP
>> into the kernel though I dont have a dual processor (of course) to gain the added
>> functionality. I have recompiled my kernel about 150 times with different setting
>> hoping it might just be a conflict in the kernel with no luck. I looked at the
>> yenta driver it's self and noticed that it accepts IRQ0 as a valid irq but that
>> appears to mean no irq at all. which config file would i use to force it to set a
>> irq?
>> >
>> >
>> > Thanx for any assistanc you might give
>>
>> plz send an lspci -vv -xxx -s *your dev*
>>
>> what kernel are you using ?
>
> i am using 2.4.18 and here is lspci
uhmm, 1th try to upgrade to a newer one, then I experienced the same problem with a
custom board... the problem was triggered by the Base Address too high:
Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
moving id_sel (in the PCI core of the board) in order to obtain a lower bar all worked.
BTW, has anybody there ever heared about such a costraint in the PCI specification ??
Why I got this strange behaviour ???
--
Emiliano Gabrielli
dip. di Fisica
2? Universit? di Roma "Tor Vergata"
On Saturday 01 February 2003 05:33, Emiliano Gabrielli wrote:
> <quote who="Robert Bisping">
>
> > On Friday 31 January 2003 08:50, you wrote:
> >> <quote who="Robert Bisping">
> >>
> >> > i have been trying to set up a cardbus card on my thinkpad 760ED for
> >> > about the
> >>
> >> last month and it keeps coming up with IRQ0 and telling me it cant find
> >> a irq for pin A. what would be causing this and how do I correct it i
> >> have already tried APCI and it does not work on my laptop so that is no
> >> help. I have compiled SMP into the kernel though I dont have a dual
> >> processor (of course) to gain the added functionality. I have
> >> recompiled my kernel about 150 times with different setting hoping it
> >> might just be a conflict in the kernel with no luck. I looked at the
> >> yenta driver it's self and noticed that it accepts IRQ0 as a valid irq
> >> but that appears to mean no irq at all. which config file would i use
> >> to force it to set a irq?
> >>
> >> > Thanx for any assistanc you might give
> >>
> >> plz send an lspci -vv -xxx -s *your dev*
> >>
> >> what kernel are you using ?
> >
> > i am using 2.4.18 and here is lspci
>
> uhmm, 1th try to upgrade to a newer one, then I experienced the same
> problem with a custom board... the problem was triggered by the Base
> Address too high:
>
> Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
>
> moving id_sel (in the PCI core of the board) in order to obtain a lower bar
> all worked.
>
>
> BTW, has anybody there ever heared about such a costraint in the PCI
> specification ?? Why I got this strange behaviour ???
ok, can you give me some more specifics? i.e how do i do that or what
howto/man etc. (not the kernel part the id_sel part) thanx
On 03:16, domenica 2 febbraio 2003, Robert Bisping wrote:
> > >> last month and it keeps coming up with IRQ0 and telling me it cant
> > >> find a irq for pin A. what would be causing this and how do I correct
> > >> it i have already tried APCI and it does not work on my laptop so
> > >> that is no help. I have compiled SMP into the kernel though I dont
> > >> have a dual processor (of course) to gain the added functionality. I
> > >> have recompiled my kernel about 150 times with different setting
> > >> hoping it might just be a conflict in the kernel with no luck. I
> > >> looked at the yenta driver it's self and noticed that it accepts IRQ0
> > >> as a valid irq but that appears to mean no irq at all. which config
> > >> file would i use to force it to set a irq?
> > >>
> > >> > Thanx for any assistanc you might give
> > >>
> > >> plz send an lspci -vv -xxx -s *your dev*
> > >>
> > >> what kernel are you using ?
> > >
> > > i am using 2.4.18 and here is lspci
> >
> > uhmm, 1th try to upgrade to a newer one, then I experienced the same
> > problem with a custom board... the problem was triggered by the Base
> > Address too high:
> >
> > Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
> >
> > moving id_sel (in the PCI core of the board) in order to obtain a lower
> > bar all worked.
> >
> >
> > BTW, has anybody there ever heared about such a costraint in the PCI
> > specification ?? Why I got this strange behaviour ???
>
> ok, can you give me some more specifics? i.e how do i do that or what
> howto/man etc. (not the kernel part the id_sel part) thanx
I think you can't do that if you are not able to put your hand in the HW.
There's nothing you can do from linux, that I know...
You can take a look to the PCI specification, but i don't think it will aid
you so much...
--
Emiliano Gabrielli
dip. di Fisica
2? Universit? di Roma "Tor Vergata"
On Monday 03 February 2003 05:16, you wrote:
> On 03:16, domenica 2 febbraio 2003, Robert Bisping wrote:
> > > >> last month and it keeps coming up with IRQ0 and telling me it cant
> > > >> find a irq for pin A. what would be causing this and how do I
> > > >> correct it i have already tried APCI and it does not work on my
> > > >> laptop so that is no help. I have compiled SMP into the kernel
> > > >> though I dont have a dual processor (of course) to gain the added
> > > >> functionality. I have recompiled my kernel about 150 times with
> > > >> different setting hoping it might just be a conflict in the kernel
> > > >> with no luck. I looked at the yenta driver it's self and noticed
> > > >> that it accepts IRQ0 as a valid irq but that appears to mean no irq
> > > >> at all. which config file would i use to force it to set a irq?
> > > >>
> > > >> > Thanx for any assistanc you might give
> > > >>
> > > >> plz send an lspci -vv -xxx -s *your dev*
> > > >>
> > > >> what kernel are you using ?
> > > >
> > > > i am using 2.4.18 and here is lspci
> > >
> > > uhmm, 1th try to upgrade to a newer one, then I experienced the same
> > > problem with a custom board... the problem was triggered by the Base
> > > Address too high:
> > >
> > > Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
> > >
> > > moving id_sel (in the PCI core of the board) in order to obtain a lower
> > > bar all worked.
> > >
> > >
> > > BTW, has anybody there ever heared about such a costraint in the PCI
> > > specification ?? Why I got this strange behaviour ???
> >
> > ok, can you give me some more specifics? i.e how do i do that or what
> > howto/man etc. (not the kernel part the id_sel part) thanx
>
> I think you can't do that if you are not able to put your hand in the HW.
> There's nothing you can do from linux, that I know...
>
> You can take a look to the PCI specification, but i don't think it will aid
> you so much...
when I reformated my drive for linux i lost the ibm configuration utilities
for windows and havent been able to get them back any other suggestions or
how do i get to the bios froma floppy with a thinkpad 760ed.
thanx