minor changes to s390 documentation
diff -urN linux-2.5.59/Documentation/s390/driver-model.txt
linux-2.5.59-s390/Documentation/s390/driver-model.txt
--- linux-2.5.59/Documentation/s390/driver-model.txt Fri Jan 17 03:21:34 2003
+++ linux-2.5.59-s390/Documentation/s390/driver-model.txt Mon Feb 3 15:02:46
2003
@@ -51,13 +51,10 @@
This is done in several steps.
-a. Some drivers need several ccw devices to make up one device. This drivers
- provide a 'chaining' interface (driver dependend) which allows to specify
- which ccw devices form a device.
-b. Each driver provides one or more parameter interfaces where parameters can
+a. Each driver can provide one or more parameter interfaces where parameters
can
be specified. These interfaces are also in the driver's responsibility.
-c. After a. and b. have been performed, if neccessary, the device is finally
- brought up via the 'online' interface.
+b. After a. has been performed, if neccessary, the device is finally brought
up
+ via the 'online' interface.
1.2 Writing a driver for ccw devices
@@ -84,7 +81,6 @@
struct ccw_device_id *ids;
int (*probe) (struct ccw_device *);
int (*remove) (struct ccw_device *);
- void (*release) (struct ccw_driver *);
int (*set_online) (struct ccw_device *);
int (*set_offline) (struct ccw_device *);
struct device_driver driver;
@@ -170,6 +166,22 @@
information about the interrupt from the irb parameter.
+1.3 ccwgroup devices
+--------------------
+
+The ccwgroup mechanism is designed to handle devices consisting of multiple
ccw
+devices, like lcs or ctc.
+
+The ccw driver provides a 'group' attribute. Piping bus ids of ccw devices to
+this attributes creates a ccwgroup device consisting of these ccw devices (if
+possible). This ccwgroup device can be set online or offline just like a
normal
+ccw device.
+
+To implement a ccwgroup driver, please refer to include/asm/ccwgroup.h. Keep
in
+mind that most drivers will need to implement both a ccwgroup and a ccw
driver
+(unless you have a meta ccw driver, like cu3088 for lcs and ctc).
+
+
2. System devices
-----------------
@@ -189,19 +201,19 @@
xpram shows up under sys/ as 'xpram'.
-3. 'Legacy' devices
--------------------
-
-The 'legacy' bus is for devices not detected, but specified by the user.
-
+3. Other devices
+----------------
3.1 Netiucv
-----------
-Netiucv connections show up under legacy/ as "netiucv<ifnum>". The interface
-number is assigned sequentially at module load.
-
-user - the user the connection goes to.
+The netiucv driver creates an attribute 'connection' under
+bus/iucv/drivers/NETIUCV. Piping to this attibute creates a new netiucv
+connection to the specified host.
+
+Netiucv connections show up under devices/iucv/ as "netiucv<ifnum>". The
interface
+number is assigned sequentially to the connections defined via the
'connection'
+attribute. 'name' shows the connection partner.
buffer - maximum buffer size.
Pipe to it to change buffer size.