trivial s390 fixes/typos.
diff -urN linux-2.5.62/arch/s390/kernel/setup.c linux-2.5.62-s390/arch/s390/kernel/setup.c
--- linux-2.5.62/arch/s390/kernel/setup.c Mon Feb 17 23:55:53 2003
+++ linux-2.5.62-s390/arch/s390/kernel/setup.c Mon Feb 24 18:24:47 2003
@@ -551,7 +551,7 @@
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos <= NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
+ return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
diff -urN linux-2.5.62/arch/s390x/kernel/setup.c linux-2.5.62-s390/arch/s390x/kernel/setup.c
--- linux-2.5.62/arch/s390x/kernel/setup.c Mon Feb 17 23:56:12 2003
+++ linux-2.5.62-s390/arch/s390x/kernel/setup.c Mon Feb 24 18:24:47 2003
@@ -545,7 +545,7 @@
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos <= NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
+ return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
diff -urN linux-2.5.62/drivers/s390/char/tape.h linux-2.5.62-s390/drivers/s390/char/tape.h
--- linux-2.5.62/drivers/s390/char/tape.h Mon Feb 17 23:56:25 2003
+++ linux-2.5.62-s390/drivers/s390/char/tape.h Mon Feb 24 18:24:47 2003
@@ -121,7 +121,7 @@
/* Function type for magnetic tape commands */
typedef int (*tape_mtop_fn)(struct tape_device *, int);
-/* Size of the arry containing the mtops for a discipline */
+/* Size of the array containing the mtops for a discipline */
#define TAPE_NR_MTOPS (MTMKPART+1)
/* Tape Discipline */
@@ -151,7 +151,7 @@
* The discipline irq function either returns an error code (<0) which
* means that the request has failed with an error or one of the following:
*/
-#define TAPE_IO_SUCCESS 0 /* request sucessful */
+#define TAPE_IO_SUCCESS 0 /* request successful */
#define TAPE_IO_PENDING 1 /* request still running */
#define TAPE_IO_RETRY 2 /* retry to current request */
#define TAPE_IO_STOP 3 /* stop the running request */
diff -urN linux-2.5.62/drivers/s390/char/tape_34xx.c linux-2.5.62-s390/drivers/s390/char/tape_34xx.c
--- linux-2.5.62/drivers/s390/char/tape_34xx.c Mon Feb 17 23:56:11 2003
+++ linux-2.5.62-s390/drivers/s390/char/tape_34xx.c Mon Feb 24 18:24:47 2003
@@ -28,7 +28,7 @@
};
/*
- * Medium sense (asyncronous with callback) for 34xx tapes. There is no 'real'
+ * Medium sense (asynchronous with callback) for 34xx tapes. There is no 'real'
* medium sense call. So we just do a normal sense.
*/
static void
@@ -44,7 +44,7 @@
/*
* This isn't quite correct. But since INTERVENTION_REQUIRED
- * means that the drive is 'neither ready nor online' it is
+ * means that the drive is 'neither ready nor on-line' it is
* only slightly inaccurate to say there is no tape loaded if
* the drive isn't online...
*/
@@ -133,7 +133,7 @@
}
/*
- * Done Handler is called when dev stat = DEVICE-END (successfull operation)
+ * Done Handler is called when dev stat = DEVICE-END (successful operation)
*/
static int
tape_34xx_done(struct tape_device *device, struct tape_request *request)
@@ -153,10 +153,10 @@
}
static inline int
-tape_34xx_erp_succeded(struct tape_device *device,
+tape_34xx_erp_succeeded(struct tape_device *device,
struct tape_request *request)
{
- DBF_EVENT(3, "Error Recovery successfull for %s\n",
+ DBF_EVENT(3, "Error Recovery successful for %s\n",
tape_op_verbose[request->op]);
return tape_34xx_done(device, request);
}
@@ -417,13 +417,13 @@
case 0x22:
/*
* Path equipment check. Might be drive adapter error, buffer
- * error on the lower interface, internal path not useable,
+ * error on the lower interface, internal path not usable,
* or error during cartridge load.
*/
PRINT_WARN("A path equipment check occurred. One of the "
"following conditions occurred:\n");
PRINT_WARN("drive adapter error, buffer error on the lower "
- "interface, internal path not useable, error "
+ "interface, internal path not usable, error "
"during cartridge load.\n");
return tape_34xx_erp_failed(device, request, -EIO);
case 0x24:
@@ -432,20 +432,20 @@
* but the drive is displaying a drive check message. Can
* be threated as "device end".
*/
- return tape_34xx_erp_succeded(device, request);
+ return tape_34xx_erp_succeeded(device, request);
case 0x27:
/*
* Command reject. May indicate illegal channel program or
- * buffer over/underrun. Since all channel programms are
+ * buffer over/underrun. Since all channel programs are
* issued by this driver and ought be correct, we assume a
- * over/underrun situaltion and retry the channel program.
+ * over/underrun situation and retry the channel program.
*/
return tape_34xx_erp_retry(device, request);
case 0x29:
/*
* Function incompatible. Either the tape is idrc compressed
* but the hardware isn't capable to do idrc, or a perform
- * subsystem func is issued and the CU is not online.
+ * subsystem func is issued and the CU is not on-line.
*/
PRINT_WARN ("Function incompatible. Try to switch off idrc\n");
return tape_34xx_erp_failed(device, request, -EIO);
@@ -463,7 +463,7 @@
if (request->op == TO_RUN) {
/* Rewind unload completed ok. */
tape_med_state_set(device, MS_UNLOADED);
- return tape_34xx_erp_succeded(device, request);
+ return tape_34xx_erp_succeeded(device, request);
}
/* tape_34xx doesn't use read buffered log commands. */
return tape_34xx_erp_bug(device, request, irb, sense[3]);
@@ -497,7 +497,7 @@
return tape_34xx_erp_failed(device, request, -EIO);
case 0x33:
/*
- * Load Failure. The catridge was not inserted correctly or
+ * Load Failure. The cartridge was not inserted correctly or
* the tape is not threaded correctly.
*/
PRINT_WARN("Cartridge load failure. Reload the cartridge "
@@ -548,7 +548,7 @@
return tape_34xx_erp_failed(device, request, -ENOSPC);
return tape_34xx_erp_failed(device, request, -EIO);
case 0x39:
- /* Backward at Beginnig of tape. */
+ /* Backward at Beginning of tape. */
return tape_34xx_erp_failed(device, request, -EIO);
case 0x3a:
/* Drive switched to not ready. */
@@ -562,14 +562,14 @@
case 0x42:
/*
* Degraded mode. A condition that can cause degraded
- * performace is detected.
+ * performance is detected.
*/
PRINT_WARN("Subsystem is running in degraded mode.\n");
return tape_34xx_erp_retry(device, request);
case 0x43:
/* Drive not ready. */
tape_med_state_set(device, MS_UNLOADED);
- /* Some commands commands are sucessful even in this case */
+ /* Some commands commands are successful even in this case */
if(sense[1] & SENSE_DRIVE_ONLINE) {
switch(request->op) {
case TO_ASSIGN:
@@ -584,7 +584,7 @@
PRINT_WARN("The drive is not ready.\n");
return tape_34xx_erp_failed(device, request, -ENOMEDIUM);
case 0x44:
- /* Locate Block unsuccessfull. */
+ /* Locate Block unsuccessful. */
if (request->op != TO_BLOCK && request->op != TO_LBL)
/* No locate block was issued. */
return tape_34xx_erp_bug(device, request,
@@ -596,11 +596,11 @@
return tape_34xx_erp_failed(device, request, -EIO);
case 0x46:
/*
- * Drive not online. Drive may be switched offline,
+ * Drive not on-line. Drive may be switched offline,
* the power supply may be switched off or
* the drive address may not be set correctly.
*/
- PRINT_WARN("The drive is not online.");
+ PRINT_WARN("The drive is not on-line.");
return tape_34xx_erp_failed(device, request, -EIO);
case 0x47:
/* Volume fenced. CU reports volume integrity is lost. */
@@ -645,7 +645,7 @@
case 0x4e:
if (device->cdev->id.driver_info == tape_3490) {
/*
- * Maximum block size exeeded. This indicates, that
+ * Maximum block size exceeded. This indicates, that
* the block to be written is larger than allowed for
* buffered mode.
*/
@@ -675,7 +675,7 @@
/* End of Volume complete. Rewind unload completed ok. */
if (request->op == TO_RUN) {
tape_med_state_set(device, MS_UNLOADED);
- return tape_34xx_erp_succeded(device, request);
+ return tape_34xx_erp_succeeded(device, request);
}
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x53:
@@ -700,7 +700,7 @@
return tape_34xx_erp_retry(device, request);
} else {
/* Global status intercept. */
- PRINT_WARN("An global status intercept was recieved, "
+ PRINT_WARN("An global status intercept was received, "
"which will be recovered.\n");
return tape_34xx_erp_retry(device, request);
}
@@ -734,7 +734,7 @@
case 0x5e:
/* Compaction algorithm incompatible. */
PRINT_WARN("The volume is recorded using an incompatible "
- "compaction algorith, which is not supported by "
+ "compaction algorithm, which is not supported by "
"the control unit.\n");
return tape_34xx_erp_failed(device, request, -EMEDIUMTYPE);
@@ -1042,7 +1042,7 @@
{
int rc;
- DBF_EVENT(3, "34xx init: $Revision: 1.6 $\n");
+ DBF_EVENT(3, "34xx init: $Revision: 1.7 $\n");
/* Register driver for 3480/3490 tapes. */
rc = ccw_driver_register(&tape_34xx_driver);
if (rc)
@@ -1061,7 +1061,7 @@
MODULE_DEVICE_TABLE(ccw, tape_34xx_ids);
MODULE_AUTHOR("(C) 2001-2002 IBM Deutschland Entwicklung GmbH");
MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape "
- "device driver ($Revision: 1.6 $)");
+ "device driver ($Revision: 1.7 $)");
MODULE_LICENSE("GPL");
module_init(tape_34xx_init);
diff -urN linux-2.5.62/drivers/s390/char/tape_core.c linux-2.5.62-s390/drivers/s390/char/tape_core.c
--- linux-2.5.62/drivers/s390/char/tape_core.c Mon Feb 17 23:56:09 2003
+++ linux-2.5.62-s390/drivers/s390/char/tape_core.c Mon Feb 24 18:24:47 2003
@@ -904,7 +904,7 @@
{
tape_dbf_area = debug_register ( "tape", 1, 2, 3*sizeof(long));
debug_register_view(tape_dbf_area, &debug_sprintf_view);
- DBF_EVENT(3, "tape init: ($Revision: 1.21 $)\n");
+ DBF_EVENT(3, "tape init: ($Revision: 1.23 $)\n");
tape_proc_init();
tapechar_init ();
tapeblock_init ();
@@ -929,7 +929,7 @@
MODULE_AUTHOR("(C) 2001 IBM Deutschland Entwicklung GmbH by Carsten Otte and "
"Michael Holzheu ([email protected],[email protected])");
MODULE_DESCRIPTION("Linux on zSeries channel attached "
- "tape device driver ($Revision: 1.21 $)");
+ "tape device driver ($Revision: 1.23 $)");
module_init(tape_init);
module_exit(tape_exit);
diff -urN linux-2.5.62/drivers/s390/net/ctcmain.c linux-2.5.62-s390/drivers/s390/net/ctcmain.c
--- linux-2.5.62/drivers/s390/net/ctcmain.c Mon Feb 24 18:23:59 2003
+++ linux-2.5.62-s390/drivers/s390/net/ctcmain.c Mon Feb 24 18:24:47 2003
@@ -1,5 +1,5 @@
/*
- * $Id: ctcmain.c,v 1.35 2003/01/17 13:46:13 cohuck Exp $
+ * $Id: ctcmain.c,v 1.36 2003/02/18 09:15:14 mschwide Exp $
*
* CTC / ESCON network driver
*
@@ -36,7 +36,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.35 $
+ * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.36 $
*
*/
@@ -273,7 +273,7 @@
print_banner(void)
{
static int printed = 0;
- char vbuf[] = "$Revision: 1.35 $";
+ char vbuf[] = "$Revision: 1.36 $";
char *version = vbuf;
if (printed)
@@ -1198,7 +1198,7 @@
fsm_deltimer(&ch->timer);
ccw_check_return_code(ch, rc);
}
- pr_debug(KERN_DEBUG "ctc: %s(): leaving\n", __FUNCTION__);
+ pr_debug("ctc: %s(): leaving\n", __FUNCTION__);
}
/**
diff -urN linux-2.5.62/drivers/s390/net/lcs.c linux-2.5.62-s390/drivers/s390/net/lcs.c
--- linux-2.5.62/drivers/s390/net/lcs.c Mon Feb 17 23:55:55 2003
+++ linux-2.5.62-s390/drivers/s390/net/lcs.c Mon Feb 24 18:24:47 2003
@@ -11,7 +11,7 @@
* Frank Pavlic ([email protected]) and
* Martin Schwidefsky <[email protected]>
*
- * $Revision: 1.42 $ $Date: 2002/12/09 13:55:28 $
+ * $Revision: 1.44 $ $Date: 2003/02/18 19:49:02 $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -59,7 +59,7 @@
/**
* initialization string for output
*/
-#define VERSION_LCS_C "$Revision: 1.42 $"
+#define VERSION_LCS_C "$Revision: 1.44 $"
static char version[] __initdata = "LCS driver ("VERSION_LCS_C "/" VERSION_LCS_H ")";