Spelling fixes for 2.5.63:
This patch fixes:
intial -> initial
intially -> initially
intiali[sz]e -> initiali[sz]e
intiali[sz]ed -> initiali[sz]ed
intiali[sz]es -> initiali[sz]es
intiali[sz]ation -> initiali[sz]ation
Fixes 32 occurrences in all.
diff -ur 2.5.63a/arch/arm/mach-iop310/mm.c 2.5.63b/arch/arm/mach-iop310/mm.c
--- 2.5.63a/arch/arm/mach-iop310/mm.c Mon Feb 24 11:05:11 2003
+++ 2.5.63b/arch/arm/mach-iop310/mm.c Mon Feb 24 17:55:42 2003
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-iop310/mm.c
*
- * Low level memory intialization for IOP310 based systems
+ * Low level memory initialization for IOP310 based systems
*
* Author: Nicolas Pitre <[email protected]>
*
diff -ur 2.5.63a/arch/ia64/sn/kernel/setup.c 2.5.63b/arch/ia64/sn/kernel/setup.c
--- 2.5.63a/arch/ia64/sn/kernel/setup.c Mon Feb 24 11:05:14 2003
+++ 2.5.63b/arch/ia64/sn/kernel/setup.c Mon Feb 24 17:55:44 2003
@@ -153,7 +153,7 @@
/**
* early_sn_setup - early setup routine for SN platforms
*
- * Sets up an intial console to aid debugging. Intended primarily
+ * Sets up an initial console to aid debugging. Intended primarily
* for bringup, it's only called if %BRINGUP and %CONFIG_IA64_EARLY_PRINTK
* are turned on. See start_kernel() in init/main.c.
*/
diff -ur 2.5.63a/arch/sh/kernel/pci-sh7751.c 2.5.63b/arch/sh/kernel/pci-sh7751.c
--- 2.5.63a/arch/sh/kernel/pci-sh7751.c Mon Feb 24 11:05:37 2003
+++ 2.5.63b/arch/sh/kernel/pci-sh7751.c Mon Feb 24 17:55:51 2003
@@ -285,7 +285,7 @@
struct pci_ops *bios = NULL;
struct pci_ops *dir = NULL;
- PCIDBG(1,"PCI: Starting intialization.\n");
+ PCIDBG(1,"PCI: Starting initialization.\n");
#ifdef CONFIG_PCI_BIOS
if ((pci_probe & PCI_PROBE_BIOS) && ((bios = pci_find_bios()))) {
pci_probe |= PCI_BIOS_SORT;
diff -ur 2.5.63a/drivers/acpi/events/evrgnini.c 2.5.63b/drivers/acpi/events/evrgnini.c
--- 2.5.63a/drivers/acpi/events/evrgnini.c Mon Feb 24 11:05:06 2003
+++ 2.5.63b/drivers/acpi/events/evrgnini.c Mon Feb 24 17:55:53 2003
@@ -410,7 +410,7 @@
* Get the appropriate address space handler for a newly
* created region.
*
- * This also performs address space specific intialization. For
+ * This also performs address space specific initialization. For
* example, PCI regions must have an _ADR object that contains
* a PCI address in the scope of the definition. This address is
* required to perform an access to PCI config space.
diff -ur 2.5.63a/drivers/atm/iphase.c 2.5.63b/drivers/atm/iphase.c
--- 2.5.63a/drivers/atm/iphase.c Mon Feb 24 11:05:46 2003
+++ 2.5.63b/drivers/atm/iphase.c Mon Feb 24 17:55:55 2003
@@ -2071,7 +2071,7 @@
- UBR Table size is 4K
- UBR wait queue is 4K
since the table and wait queues are contiguous, all the bytes
- can be intialized by one memeset.
+ can be initialized by one memeset.
*/
vcsize_sel = 0;
diff -ur 2.5.63a/drivers/i2c/i2c-adap-ite.c 2.5.63b/drivers/i2c/i2c-adap-ite.c
--- 2.5.63a/drivers/i2c/i2c-adap-ite.c Mon Feb 24 11:05:12 2003
+++ 2.5.63b/drivers/i2c/i2c-adap-ite.c Mon Feb 24 17:55:56 2003
@@ -265,7 +265,7 @@
MODULE_PARM(i2c_debug,"i");
-/* Called when module is loaded or when kernel is intialized.
+/* Called when module is loaded or when kernel is initialized.
* If MODULES is defined when this file is compiled, then this function will
* resolve to init_module (the function called when insmod is invoked for a
* module). Otherwise, this function is called early in the boot, when the
diff -ur 2.5.63a/drivers/i2c/i2c-algo-ite.c 2.5.63b/drivers/i2c/i2c-algo-ite.c
--- 2.5.63a/drivers/i2c/i2c-algo-ite.c Mon Feb 24 11:05:43 2003
+++ 2.5.63b/drivers/i2c/i2c-algo-ite.c Mon Feb 24 17:55:58 2003
@@ -860,7 +860,7 @@
* is loaded via insmod) when this file is compiled with MODULES defined.
* Otherwise (i.e. if you want this driver statically linked to the kernel),
* a pointer to this function is stored in a table and called
- * during the intialization of the kernel (in do_basic_setup in /init/main.c)
+ * during the initialization of the kernel (in do_basic_setup in /init/main.c)
*
* All this functionality is complements of the macros defined in linux/init.h
*/
diff -ur 2.5.63a/drivers/ieee1394/dv1394-private.h 2.5.63b/drivers/ieee1394/dv1394-private.h
--- 2.5.63a/drivers/ieee1394/dv1394-private.h Mon Feb 24 11:05:35 2003
+++ 2.5.63b/drivers/ieee1394/dv1394-private.h Mon Feb 24 17:56:00 2003
@@ -488,7 +488,7 @@
struct frame *frames[DV1394_MAX_FRAMES];
/* n_frames also serves as an indicator that this struct video_card is
- intialized and ready to run DMA buffers */
+ initialized and ready to run DMA buffers */
int n_frames;
diff -ur 2.5.63a/drivers/isdn/eicon/adapter.h 2.5.63b/drivers/isdn/eicon/adapter.h
--- 2.5.63a/drivers/isdn/eicon/adapter.h Mon Feb 24 11:05:44 2003
+++ 2.5.63b/drivers/isdn/eicon/adapter.h Mon Feb 24 17:56:02 2003
@@ -185,7 +185,7 @@
IDI_CALL DivasIdiRequest[];
/*
- * intialisation entry point
+ * initialisation entry point
*/
int DivasInit(void);
diff -ur 2.5.63a/drivers/net/hamachi.c 2.5.63b/drivers/net/hamachi.c
--- 2.5.63a/drivers/net/hamachi.c Mon Feb 24 11:06:02 2003
+++ 2.5.63b/drivers/net/hamachi.c Mon Feb 24 17:56:05 2003
@@ -316,7 +316,7 @@
the new buffer or the function returns non-zero which should case the
scheduler to reschedule the buffer later.
-01/15/1999 EPK Some adjustments were made to the chip intialization.
+01/15/1999 EPK Some adjustments were made to the chip initialization.
End-to-end flow control should now be fully active and the interrupt
algorithm vars have been changed. These could probably use further tuning.
diff -ur 2.5.63a/drivers/net/sk_mca.c 2.5.63b/drivers/net/sk_mca.c
--- 2.5.63a/drivers/net/sk_mca.c Mon Feb 24 11:05:36 2003
+++ 2.5.63b/drivers/net/sk_mca.c Mon Feb 24 17:56:07 2003
@@ -45,7 +45,7 @@
May 23nd, 1999
can receive frames, send frames
May 24th, 1999
- modularized intialization of LANCE
+ modularized initialization of LANCE
loadable as module
still Tx problem :-(
May 26th, 1999
diff -ur 2.5.63a/drivers/net/tokenring/lanstreamer.c 2.5.63b/drivers/net/tokenring/lanstreamer.c
--- 2.5.63a/drivers/net/tokenring/lanstreamer.c Mon Feb 24 11:06:01 2003
+++ 2.5.63b/drivers/net/tokenring/lanstreamer.c Mon Feb 24 17:56:11 2003
@@ -542,7 +542,7 @@
writew(readw(streamer_mmio + LAPWWO) + 6, streamer_mmio + LAPA);
if (readw(streamer_mmio + LAPD)) {
- printk(KERN_INFO "tokenring card intialization failed. errorcode : %x\n",
+ printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",
ntohs(readw(streamer_mmio + LAPD)));
release_region(dev->base_addr, STREAMER_IO_SPACE);
return -1;
diff -ur 2.5.63a/drivers/net/tokenring/olympic.c 2.5.63b/drivers/net/tokenring/olympic.c
--- 2.5.63a/drivers/net/tokenring/olympic.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/drivers/net/tokenring/olympic.c Mon Feb 24 17:56:15 2003
@@ -384,7 +384,7 @@
}
#endif
if(readw(init_srb+6)) {
- printk(KERN_INFO "tokenring card intialization failed. errorcode : %x\n",readw(init_srb+6));
+ printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6));
return -ENODEV;
}
diff -ur 2.5.63a/drivers/net/wan/sdlamain.c 2.5.63b/drivers/net/wan/sdlamain.c
--- 2.5.63a/drivers/net/wan/sdlamain.c Mon Feb 24 11:05:38 2003
+++ 2.5.63b/drivers/net/wan/sdlamain.c Mon Feb 24 17:56:16 2003
@@ -38,7 +38,7 @@
* replaced it with 'wandev->enable_tx_int'.
* May 29, 1997 Jaspreet Singh Flow Control Problem
* added "wandev->tx_int_enabled=1" line in the
-* init module. This line intializes the flag for
+* init module. This line initializes the flag for
* preventing Interrupt disabled with device set to
* busy
* Jan 15, 1997 Gene Kozin Version 3.1.0
diff -ur 2.5.63a/drivers/net/wan/wanpipe_multppp.c 2.5.63b/drivers/net/wan/wanpipe_multppp.c
--- 2.5.63a/drivers/net/wan/wanpipe_multppp.c Mon Feb 24 11:06:02 2003
+++ 2.5.63b/drivers/net/wan/wanpipe_multppp.c Mon Feb 24 17:56:18 2003
@@ -2283,7 +2283,7 @@
Intr_test_counter = 0;
- /* The critical flag is unset because during intialization (if_open)
+ /* The critical flag is unset because during initialization (if_open)
* we want the interrupts to be enabled so that when the wpc_isr is
* called it does not exit due to critical flag set.
*/
diff -ur 2.5.63a/drivers/net/wireless/orinoco.c 2.5.63b/drivers/net/wireless/orinoco.c
--- 2.5.63a/drivers/net/wireless/orinoco.c Mon Feb 24 11:06:02 2003
+++ 2.5.63b/drivers/net/wireless/orinoco.c Mon Feb 24 17:56:22 2003
@@ -4166,7 +4166,7 @@
e = create_proc_read_entry("buf", S_IFREG | S_IRUGO,
priv->dir_dev, orinoco_proc_get_hermes_buf, priv);
if (! e) {
- printk(KERN_ERR "Unable to intialize /proc/hermes/%s/buf\n", dev->name);
+ printk(KERN_ERR "Unable to initialize /proc/hermes/%s/buf\n", dev->name);
goto fail;
}
diff -ur 2.5.63a/drivers/scsi/FlashPoint.c 2.5.63b/drivers/scsi/FlashPoint.c
--- 2.5.63a/drivers/scsi/FlashPoint.c Mon Feb 24 11:05:12 2003
+++ 2.5.63b/drivers/scsi/FlashPoint.c Mon Feb 24 17:56:26 2003
@@ -7529,7 +7529,7 @@
*
* $Workfile: phase.c $
*
- * Description: Functions to intially handle the SCSI bus phase when
+ * Description: Functions to initially handle the SCSI bus phase when
* the target asserts request (and the automation is not
* enabled to handle the situation).
*
diff -ur 2.5.63a/drivers/scsi/aacraid/comminit.c 2.5.63b/drivers/scsi/aacraid/comminit.c
--- 2.5.63a/drivers/scsi/aacraid/comminit.c Mon Feb 24 11:05:06 2003
+++ 2.5.63b/drivers/scsi/aacraid/comminit.c Mon Feb 24 17:56:29 2003
@@ -210,7 +210,7 @@
/**
* aac_comm_init - Initialise FSA data structures
- * @dev: Adapter to intialise
+ * @dev: Adapter to initialise
*
* Initializes the data structures that are required for the FSA commuication
* interface to operate.
diff -ur 2.5.63a/drivers/scsi/aacraid/commsup.c 2.5.63b/drivers/scsi/aacraid/commsup.c
--- 2.5.63a/drivers/scsi/aacraid/commsup.c Mon Feb 24 11:05:38 2003
+++ 2.5.63b/drivers/scsi/aacraid/commsup.c Mon Feb 24 17:56:31 2003
@@ -79,7 +79,7 @@
* fib_setup - setup the fibs
* @dev: Adapter to set up
*
- * Allocate the PCI space for the fibs, map it and then intialise the
+ * Allocate the PCI space for the fibs, map it and then initialise the
* fib area, the unmapped fib data and also the free list
*/
diff -ur 2.5.63a/drivers/scsi/gdth.c 2.5.63b/drivers/scsi/gdth.c
--- 2.5.63a/drivers/scsi/gdth.c Mon Feb 24 11:05:35 2003
+++ 2.5.63b/drivers/scsi/gdth.c Mon Feb 24 17:56:33 2003
@@ -28,7 +28,7 @@
* *
* $Log: gdth.c,v $
* Revision 1.61 2002/10/03 09:35:22 boji
- * Fixed SCREENSERVICE intialisation in SMP cases.
+ * Fixed SCREENSERVICE initialisation in SMP cases.
* Added checks for gdth_polling before GDTH_HA_LOCK
*
* Revision 1.60 2002/02/05 09:35:22 achim
diff -ur 2.5.63a/drivers/usb/misc/auerswald.c 2.5.63b/drivers/usb/misc/auerswald.c
--- 2.5.63a/drivers/usb/misc/auerswald.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/drivers/usb/misc/auerswald.c Mon Feb 24 17:56:34 2003
@@ -1946,7 +1946,7 @@
if (intf->altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
- /* allocate memory for our device and intialize it */
+ /* allocate memory for our device and initialize it */
cp = kmalloc (sizeof(auerswald_t), GFP_KERNEL);
if (cp == NULL) {
err ("out of memory");
diff -ur 2.5.63a/drivers/usb/usb-skeleton.c 2.5.63b/drivers/usb/usb-skeleton.c
--- 2.5.63a/drivers/usb/usb-skeleton.c Mon Feb 24 11:05:31 2003
+++ 2.5.63b/drivers/usb/usb-skeleton.c Mon Feb 24 17:56:36 2003
@@ -498,7 +498,7 @@
goto exit;
}
- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kmalloc (sizeof(struct usb_skel), GFP_KERNEL);
if (dev == NULL) {
err ("Out of memory");
diff -ur 2.5.63a/drivers/video/controlfb.c 2.5.63b/drivers/video/controlfb.c
--- 2.5.63a/drivers/video/controlfb.c Mon Feb 24 11:05:12 2003
+++ 2.5.63b/drivers/video/controlfb.c Mon Feb 24 17:56:37 2003
@@ -554,7 +554,7 @@
/*
- * Called from fbmem.c for probing & intializing
+ * Called from fbmem.c for probing & initializing
*/
int __init control_init(void)
{
diff -ur 2.5.63a/fs/reiserfs/journal.c 2.5.63b/fs/reiserfs/journal.c
--- 2.5.63a/fs/reiserfs/journal.c Mon Feb 24 11:05:34 2003
+++ 2.5.63b/fs/reiserfs/journal.c Mon Feb 24 17:56:39 2003
@@ -1931,7 +1931,7 @@
printk( "journal_init_dev: '%s' is not a block device", jdev_name );
result = -ENOTBLK;
} else if( jdev_inode -> i_bdev == NULL ) {
- printk( "journal_init_dev: bdev unintialized for '%s'", jdev_name );
+ printk( "journal_init_dev: bdev uninitialized for '%s'", jdev_name );
result = -ENOMEM;
} else {
/* ok */
diff -ur 2.5.63a/net/irda/irsyms.c 2.5.63b/net/irda/irsyms.c
--- 2.5.63a/net/irda/irsyms.c Mon Feb 24 11:05:44 2003
+++ 2.5.63b/net/irda/irsyms.c Mon Feb 24 17:56:41 2003
@@ -254,7 +254,7 @@
/*
* Function irda_init (void)
*
- * Protocol stack intialisation entry point.
+ * Protocol stack initialisation entry point.
* Initialise the various components of the IrDA stack
*/
int __init irda_init(void)
diff -ur 2.5.63a/net/sctp/sm_statefuns.c 2.5.63b/net/sctp/sm_statefuns.c
--- 2.5.63a/net/sctp/sm_statefuns.c Mon Feb 24 11:05:06 2003
+++ 2.5.63b/net/sctp/sm_statefuns.c Mon Feb 24 17:56:43 2003
@@ -1413,7 +1413,7 @@
* at about the same time but the peer endpoint started its INIT
* after responding to the local endpoint's INIT
*/
-/* This case represents an intialization collision. */
+/* This case represents an initialization collision. */
static sctp_disposition_t sctp_sf_do_dupcook_b(const sctp_endpoint_t *ep,
const sctp_association_t *asoc,
sctp_chunk_t *chunk,
diff -ur 2.5.63a/sound/core/seq/seq_midi_emul.c 2.5.63b/sound/core/seq/seq_midi_emul.c
--- 2.5.63a/sound/core/seq/seq_midi_emul.c Mon Feb 24 11:05:44 2003
+++ 2.5.63b/sound/core/seq/seq_midi_emul.c Mon Feb 24 17:56:45 2003
@@ -375,7 +375,7 @@
/*
- * intialize the MIDI status
+ * initialize the MIDI status
*/
void
snd_midi_channel_set_clear(snd_midi_channel_set_t *chset)
diff -ur 2.5.63a/sound/oss/awe_wave.c 2.5.63b/sound/oss/awe_wave.c
--- 2.5.63a/sound/oss/awe_wave.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/sound/oss/awe_wave.c Mon Feb 24 17:56:47 2003
@@ -562,7 +562,7 @@
/* clear all samples */
awe_reset_samples();
- /* intialize AWE32 hardware */
+ /* initialize AWE32 hardware */
awe_initialize();
sprintf(awe_info.name, "AWE32-%s (RAM%dk)",
diff -ur 2.5.63a/sound/oss/es1371.c 2.5.63b/sound/oss/es1371.c
--- 2.5.63a/sound/oss/es1371.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/sound/oss/es1371.c Mon Feb 24 17:56:49 2003
@@ -2863,7 +2863,7 @@
if ((res=(s->dev_midi = register_sound_midi(&es1371_midi_fops, -1))<0 ))
goto err_dev4;
#ifdef ES1371_DEBUG
- /* intialize the debug proc device */
+ /* initialize the debug proc device */
s->ps = create_proc_read_entry("es1371",0,NULL,proc_es1371_dump,NULL);
#endif /* ES1371_DEBUG */
diff -ur 2.5.63a/sound/oss/ite8172.c 2.5.63b/sound/oss/ite8172.c
--- 2.5.63a/sound/oss/ite8172.c Mon Feb 24 11:05:11 2003
+++ 2.5.63b/sound/oss/ite8172.c Mon Feb 24 17:56:51 2003
@@ -1780,7 +1780,7 @@
goto err_dev2;
#ifdef IT8172_DEBUG
- /* intialize the debug proc device */
+ /* initialize the debug proc device */
s->ps = create_proc_read_entry(IT8172_MODULE_NAME, 0, NULL,
proc_it8172_dump, NULL);
#endif /* IT8172_DEBUG */
diff -ur 2.5.63a/sound/oss/nec_vrc5477.c 2.5.63b/sound/oss/nec_vrc5477.c
--- 2.5.63a/sound/oss/nec_vrc5477.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/sound/oss/nec_vrc5477.c Mon Feb 24 17:56:53 2003
@@ -1884,7 +1884,7 @@
goto err_dev2;
#ifdef VRC5477_AC97_DEBUG
- /* intialize the debug proc device */
+ /* initialize the debug proc device */
s->ps = create_proc_read_entry(VRC5477_AC97_MODULE_NAME, 0, NULL,
proc_vrc5477_ac97_dump, NULL);
#endif /* VRC5477_AC97_DEBUG */
diff -ur 2.5.63a/sound/usb/usbaudio.c 2.5.63b/sound/usb/usbaudio.c
--- 2.5.63a/sound/usb/usbaudio.c Mon Feb 24 11:05:38 2003
+++ 2.5.63b/sound/usb/usbaudio.c Mon Feb 24 17:56:55 2003
@@ -1717,7 +1717,7 @@
/*
- * intialize the substream instance.
+ * initialize the substream instance.
*/
static void init_substream(snd_usb_stream_t *as, int stream, struct audioformat *fp)