Spelling fixes for 2.5.63:
This patch fixes:
neccessary -> necessary
unneccessary -> unnecessary
Fixes 46 occurrences in all.
diff -ur 2.5.63a/arch/i386/kernel/cpu/cpufreq/longrun.c 2.5.63b/arch/i386/kernel/cpu/cpufreq/longrun.c
--- 2.5.63a/arch/i386/kernel/cpu/cpufreq/longrun.c Mon Feb 24 11:05:38 2003
+++ 2.5.63b/arch/i386/kernel/cpu/cpufreq/longrun.c Mon Feb 24 18:28:38 2003
@@ -133,7 +133,7 @@
* longrun_determine_freqs - determines the lowest and highest possible core frequency
*
* Determines the lowest and highest possible core frequencies on this CPU.
- * This is neccessary to calculate the performance percentage according to
+ * This is necessary to calculate the performance percentage according to
* TMTA rules:
* performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
*/
diff -ur 2.5.63a/arch/i386/kernel/suspend.c 2.5.63b/arch/i386/kernel/suspend.c
--- 2.5.63a/arch/i386/kernel/suspend.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/arch/i386/kernel/suspend.c Mon Feb 24 18:30:22 2003
@@ -113,7 +113,7 @@
int cpu = smp_processor_id();
struct tss_struct * t = init_tss + cpu;
- set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
+ set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
cpu_gdt_table[cpu][GDT_ENTRY_TSS].b &= 0xfffffdff;
load_TR_desc(); /* This does ltr */
diff -ur 2.5.63a/arch/mips/au1000/common/serial.c 2.5.63b/arch/mips/au1000/common/serial.c
--- 2.5.63a/arch/mips/au1000/common/serial.c Mon Feb 24 11:05:14 2003
+++ 2.5.63b/arch/mips/au1000/common/serial.c Mon Feb 24 18:28:52 2003
@@ -2703,7 +2703,7 @@
* port exists and is in use an error is returned. If the port
* is not currently in the table it is added.
*
- * The port is then probed and if neccessary the IRQ is autodetected
+ * The port is then probed and if necessary the IRQ is autodetected
* If this fails an error is returned.
*
* On success the port is ready to use and the line number is returned.
diff -ur 2.5.63a/arch/sh/kernel/pci-dma.c 2.5.63b/arch/sh/kernel/pci-dma.c
--- 2.5.63a/arch/sh/kernel/pci-dma.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/arch/sh/kernel/pci-dma.c Mon Feb 24 18:28:56 2003
@@ -24,7 +24,7 @@
ret = (void *) __get_free_pages(gfp, get_order(size));
if (ret != NULL) {
- /* Is it neccessary to do the memset? */
+ /* Is it necessary to do the memset? */
memset(ret, 0, size);
*dma_handle = virt_to_bus(ret);
}
diff -ur 2.5.63a/arch/sh/stboards/pcidma.c 2.5.63b/arch/sh/stboards/pcidma.c
--- 2.5.63a/arch/sh/stboards/pcidma.c Mon Feb 24 11:05:31 2003
+++ 2.5.63b/arch/sh/stboards/pcidma.c Mon Feb 24 18:28:58 2003
@@ -24,7 +24,7 @@
ret = (void *) __get_free_pages(gfp, get_order(size));
if (ret != NULL) {
- /* Is it neccessary to do the memset? */
+ /* Is it necessary to do the memset? */
memset(ret, 0, size);
*dma_handle = virt_to_bus(ret);
}
diff -ur 2.5.63a/drivers/char/ftape/zftape/zftape-write.c 2.5.63b/drivers/char/ftape/zftape/zftape-write.c
--- 2.5.63a/drivers/char/ftape/zftape/zftape-write.c Mon Feb 24 11:05:32 2003
+++ 2.5.63b/drivers/char/ftape/zftape/zftape-write.c Mon Feb 24 18:28:59 2003
@@ -357,7 +357,7 @@
*volume = zft_find_volume(pos->seg_pos);
DUMP_VOLINFO(ft_t_noise, "", *volume);
zft_just_before_eof = 0;
- /* now merge with old data if neccessary */
+ /* now merge with old data if necessary */
if (!zft_qic_mode && pos->seg_byte_pos != 0){
result = zft_fetch_segment(pos->seg_pos,
zft_deblock_buf,
diff -ur 2.5.63a/drivers/ide/ide-dma.c 2.5.63b/drivers/ide/ide-dma.c
--- 2.5.63a/drivers/ide/ide-dma.c Mon Feb 24 11:05:32 2003
+++ 2.5.63b/drivers/ide/ide-dma.c Mon Feb 24 18:30:35 2003
@@ -196,9 +196,9 @@
* @drive: the drive to build the DMA table for
* @rq: the request holding the sg list
*
- * Perform the PCI mapping magic neccessary to access the source or
+ * Perform the PCI mapping magic necessary to access the source or
* target buffers of a request via PCI DMA. The lower layers of the
- * kernel provide the neccessary cache management so that we can
+ * kernel provide the necessary cache management so that we can
* operate in a portable fashion
*/
@@ -226,9 +226,9 @@
* @drive: the drive to build the DMA table for
* @rq: the request holding the sg list
*
- * Perform the PCI mapping magic neccessary to access the source or
+ * Perform the PCI mapping magic necessary to access the source or
* target buffers of a taskfile request via PCI DMA. The lower layers
- * of the kernel provide the neccessary cache management so that we can
+ * of the kernel provide the necessary cache management so that we can
* operate in a portable fashion
*/
diff -ur 2.5.63a/drivers/ide/ide-io.c 2.5.63b/drivers/ide/ide-io.c
--- 2.5.63a/drivers/ide/ide-io.c Mon Feb 24 11:05:40 2003
+++ 2.5.63b/drivers/ide/ide-io.c Mon Feb 24 18:30:38 2003
@@ -379,7 +379,7 @@
* @drive: drive the completion interrupt occurred on
*
* drive_cmd_intr() is invoked on completion of a special DRIVE_CMD.
- * We do any neccessary daya reading and then wait for the drive to
+ * We do any necessary daya reading and then wait for the drive to
* go non busy. At that point we may read the error data and complete
* the request
*/
@@ -652,7 +652,7 @@
* @hwgroup: hardware group to select on
*
* choose_drive() selects the next drive which will be serviced.
- * This is neccessary because the IDE layer can't issue commands
+ * This is necessary because the IDE layer can't issue commands
* to both drives on the same cable, unlike SCSI.
*/
diff -ur 2.5.63a/drivers/ide/setup-pci.c 2.5.63b/drivers/ide/setup-pci.c
--- 2.5.63a/drivers/ide/setup-pci.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/drivers/ide/setup-pci.c Mon Feb 24 18:30:40 2003
@@ -470,7 +470,7 @@
* @hwif: Hardware interface we are configuring
*
* Set up the DMA base for the interface. Enable the master bits as
- * neccessary and attempt to bring the device DMA into a ready to use
+ * necessary and attempt to bring the device DMA into a ready to use
* state
*/
@@ -573,7 +573,7 @@
* @index: ata index to update
*
* Scan the interfaces attached to this device and do any
- * neccessary per port setup. Attach the devices and ask the
+ * necessary per port setup. Attach the devices and ask the
* generic DMA layer to do its work for us.
*
* Normally called automaticall from do_ide_pci_setup_device,
diff -ur 2.5.63a/drivers/isdn/hisax/amd7930_fn.c 2.5.63b/drivers/isdn/hisax/amd7930_fn.c
--- 2.5.63a/drivers/isdn/hisax/amd7930_fn.c Mon Feb 24 11:05:35 2003
+++ 2.5.63b/drivers/isdn/hisax/amd7930_fn.c Mon Feb 24 18:29:06 2003
@@ -42,7 +42,7 @@
*
* Credits:
* Programming the driver for Formula-n enter:now ISDN PCI and
- * neccessary this driver for the used Amd 7930 D-channel-controller
+ * necessary this driver for the used Amd 7930 D-channel-controller
* was spnsored by Formula-n Europe AG.
* Thanks to Karsten Keil and Petr Novak, who gave me support in
* Hisax-specific questions.
diff -ur 2.5.63a/drivers/isdn/hisax/enternow_pci.c 2.5.63b/drivers/isdn/hisax/enternow_pci.c
--- 2.5.63a/drivers/isdn/hisax/enternow_pci.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/drivers/isdn/hisax/enternow_pci.c Mon Feb 24 18:29:08 2003
@@ -49,7 +49,7 @@
*
* Credits:
* Programming the driver for Formula-n enter:now ISDN PCI and
- * neccessary the driver for the used Amd 7930 D-channel-controller
+ * necessary the driver for the used Amd 7930 D-channel-controller
* was spnsored by Formula-n Europe AG.
* Thanks to Karsten Keil and Petr Novak, who gave me support in
* Hisax-specific questions.
diff -ur 2.5.63a/drivers/isdn/hysdn/hycapi.c 2.5.63b/drivers/isdn/hysdn/hycapi.c
--- 2.5.63a/drivers/isdn/hysdn/hycapi.c Mon Feb 24 11:05:06 2003
+++ 2.5.63b/drivers/isdn/hysdn/hycapi.c Mon Feb 24 18:29:09 2003
@@ -521,7 +521,7 @@
Receive a capi-message.
All B3_DATA_IND are converted to 64K-extension compatible format.
-New nccis are created if neccessary.
+New nccis are created if necessary.
*******************************************************************/
void
diff -ur 2.5.63a/drivers/md/dm-table.c 2.5.63b/drivers/md/dm-table.c
--- 2.5.63a/drivers/md/dm-table.c Mon Feb 24 11:06:01 2003
+++ 2.5.63b/drivers/md/dm-table.c Mon Feb 24 18:29:11 2003
@@ -499,7 +499,7 @@
}
/*
- * Decrement a devices use count and remove it if neccessary.
+ * Decrement a devices use count and remove it if necessary.
*/
void dm_put_device(struct dm_target *ti, struct dm_dev *dd)
{
diff -ur 2.5.63a/drivers/message/i2o/i2o_core.c 2.5.63b/drivers/message/i2o/i2o_core.c
--- 2.5.63a/drivers/message/i2o/i2o_core.c Mon Feb 24 11:05:35 2003
+++ 2.5.63b/drivers/message/i2o/i2o_core.c Mon Feb 24 18:29:12 2003
@@ -2120,7 +2120,7 @@
* @iop: controller
*
* This function brings an I2O controller into HOLD state. The adapter
- * is reset if neccessary and then the queues and resource table
+ * is reset if necessary and then the queues and resource table
* are read. -1 is returned on a failure, 0 on success.
*
*/
diff -ur 2.5.63a/drivers/net/3c527.c 2.5.63b/drivers/net/3c527.c
--- 2.5.63a/drivers/net/3c527.c Mon Feb 24 11:05:33 2003
+++ 2.5.63b/drivers/net/3c527.c Mon Feb 24 18:29:14 2003
@@ -1168,7 +1168,7 @@
* the stack or, if the packet is near MTU sized, we allocate
* another buffer and flip the old one up the stack.
*
- * We must succeed in keeping a buffer on the ring. If neccessary we
+ * We must succeed in keeping a buffer on the ring. If necessary we
* will toss a received packet rather than lose a ring entry. Once
* the first uncompleted descriptor is found, we move the
* End-Of-List bit to include the buffers just processed.
diff -ur 2.5.63a/drivers/net/8390.c 2.5.63b/drivers/net/8390.c
--- 2.5.63a/drivers/net/8390.c Mon Feb 24 11:05:08 2003
+++ 2.5.63b/drivers/net/8390.c Mon Feb 24 18:29:16 2003
@@ -417,7 +417,7 @@
* Handle the ether interface interrupts. We pull packets from
* the 8390 via the card specific functions and fire them at the networking
* stack. We also handle transmit completions and wake the transmit path if
- * neccessary. We also update the counters and do other housekeeping as
+ * necessary. We also update the counters and do other housekeeping as
* needed.
*/
diff -ur 2.5.63a/drivers/net/e100/e100_config.c 2.5.63b/drivers/net/e100/e100_config.c
--- 2.5.63a/drivers/net/e100/e100_config.c Mon Feb 24 11:05:15 2003
+++ 2.5.63b/drivers/net/e100/e100_config.c Mon Feb 24 18:29:17 2003
@@ -149,7 +149,7 @@
* 32 from the RFD base address, instead of at offset 16. */
bdp->config[7] |= CB_CFIG_EXTENDED_RFD;
- /* put the chip into D102 receive mode. This is neccessary
+ /* put the chip into D102 receive mode. This is necessary
* for any parsing and offloading features. */
bdp->config[22] = CB_CFIG_RECEIVE_GAMLA_MODE;
diff -ur 2.5.63a/drivers/net/pcmcia/axnet_cs.c 2.5.63b/drivers/net/pcmcia/axnet_cs.c
--- 2.5.63a/drivers/net/pcmcia/axnet_cs.c Mon Feb 24 11:05:33 2003
+++ 2.5.63b/drivers/net/pcmcia/axnet_cs.c Mon Feb 24 18:29:19 2003
@@ -1341,7 +1341,7 @@
* Handle the ether interface interrupts. We pull packets from
* the 8390 via the card specific functions and fire them at the networking
* stack. We also handle transmit completions and wake the transmit path if
- * neccessary. We also update the counters and do other housekeeping as
+ * necessary. We also update the counters and do other housekeeping as
* needed.
*/
diff -ur 2.5.63a/drivers/net/sk98lin/h/skdrv1st.h 2.5.63b/drivers/net/sk98lin/h/skdrv1st.h
--- 2.5.63a/drivers/net/sk98lin/h/skdrv1st.h Mon Feb 24 11:05:05 2003
+++ 2.5.63b/drivers/net/sk98lin/h/skdrv1st.h Mon Feb 24 18:29:21 2003
@@ -72,7 +72,7 @@
* Description:
*
* This is the first include file of the driver, which includes all
- * neccessary system header files and some of the GEnesis header files.
+ * necessary system header files and some of the GEnesis header files.
* It also defines some basic items.
*
* Include File Hierarchy:
diff -ur 2.5.63a/drivers/net/sk98lin/h/skdrv2nd.h 2.5.63b/drivers/net/sk98lin/h/skdrv2nd.h
--- 2.5.63a/drivers/net/sk98lin/h/skdrv2nd.h Mon Feb 24 11:06:02 2003
+++ 2.5.63b/drivers/net/sk98lin/h/skdrv2nd.h Mon Feb 24 18:29:22 2003
@@ -85,7 +85,7 @@
* Description:
*
* This is the second include file of the driver, which includes all other
- * neccessary files and defines all structures and constants used by the
+ * necessary files and defines all structures and constants used by the
* driver and the common modules.
*
* Include File Hierarchy:
diff -ur 2.5.63a/drivers/net/sk98lin/skgehwt.c 2.5.63b/drivers/net/sk98lin/skgehwt.c
--- 2.5.63a/drivers/net/sk98lin/skgehwt.c Mon Feb 24 11:05:43 2003
+++ 2.5.63b/drivers/net/sk98lin/skgehwt.c Mon Feb 24 18:30:56 2003
@@ -61,14 +61,14 @@
* fix: chg pAc -> pAC
*
* Revision 1.4 1998/08/10 14:14:52 gklug
- * rmv: unneccessary SK_ADDR macro
+ * rmv: unnecessary SK_ADDR macro
*
* Revision 1.3 1998/08/07 12:53:44 gklug
* fix: first compiled version
*
* Revision 1.2 1998/08/07 09:19:29 gklug
* adapt functions to the C coding conventions
- * rmv unneccessary functions.
+ * rmv unnecessary functions.
*
* Revision 1.1 1998/08/05 11:28:36 gklug
* first version: adapted from SMT/FDDI
diff -ur 2.5.63a/drivers/net/sk98lin/ski2c.c 2.5.63b/drivers/net/sk98lin/ski2c.c
--- 2.5.63a/drivers/net/sk98lin/ski2c.c Mon Feb 24 11:05:04 2003
+++ 2.5.63b/drivers/net/sk98lin/ski2c.c Mon Feb 24 18:29:25 2003
@@ -178,7 +178,7 @@
* Revision 1.2 1998/08/11 07:27:15 gklug
* add: functions of the interface
* adapt rest of source to C coding Conventions
- * rmv: unneccessary code taken from Mona Lisa
+ * rmv: unnecessary code taken from Mona Lisa
*
* Revision 1.1 1998/06/19 14:28:43 malthoff
* Created. Sources taken from ML Projekt.
diff -ur 2.5.63a/drivers/net/sk98lin/skxmac2.c 2.5.63b/drivers/net/sk98lin/skxmac2.c
--- 2.5.63a/drivers/net/sk98lin/skxmac2.c Mon Feb 24 11:05:47 2003
+++ 2.5.63b/drivers/net/sk98lin/skxmac2.c Mon Feb 24 18:29:27 2003
@@ -596,7 +596,7 @@
* none, National: 80ns).
*
* ATTENTION:
- * It is absolutely neccessary to reset the SW_RST Bit first
+ * It is absolutely necessary to reset the SW_RST Bit first
* before calling this function.
*
* Returns:
diff -ur 2.5.63a/drivers/s390/block/dasd_3990_erp.c 2.5.63b/drivers/s390/block/dasd_3990_erp.c
--- 2.5.63a/drivers/s390/block/dasd_3990_erp.c Mon Feb 24 11:05:41 2003
+++ 2.5.63b/drivers/s390/block/dasd_3990_erp.c Mon Feb 24 18:29:29 2003
@@ -197,7 +197,7 @@
* DASD_3990_ERP_CLEANUP
*
* DESCRIPTION
- * Removes the already build but not neccessary ERP request and sets
+ * Removes the already build but not necessary ERP request and sets
* the status of the original cqr / erp to the given (final) status
*
* PARAMETER
diff -ur 2.5.63a/drivers/scsi/FlashPoint.c 2.5.63b/drivers/scsi/FlashPoint.c
--- 2.5.63a/drivers/scsi/FlashPoint.c Mon Feb 24 11:05:12 2003
+++ 2.5.63b/drivers/scsi/FlashPoint.c Mon Feb 24 18:29:30 2003
@@ -10866,7 +10866,7 @@
* Function: DiagEEPROM
*
* Description: Verfiy checksum and 'Key' and initialize the EEPROM if
- * neccessary.
+ * necessary.
*
*---------------------------------------------------------------------*/
diff -ur 2.5.63a/drivers/scsi/oktagon_esp.c 2.5.63b/drivers/scsi/oktagon_esp.c
--- 2.5.63a/drivers/scsi/oktagon_esp.c Mon Feb 24 11:05:05 2003
+++ 2.5.63b/drivers/scsi/oktagon_esp.c Mon Feb 24 18:29:33 2003
@@ -245,7 +245,7 @@
if((code == SYS_DOWN || code == SYS_HALT) && (esp = current_esp))
{
esp_bootup_reset(esp,esp->eregs);
- udelay(500); /* Settle time. Maybe unneccessary. */
+ udelay(500); /* Settle time. Maybe unnecessary. */
}
return NOTIFY_DONE;
}
diff -ur 2.5.63a/drivers/serial/8250.c 2.5.63b/drivers/serial/8250.c
--- 2.5.63a/drivers/serial/8250.c Mon Feb 24 11:05:06 2003
+++ 2.5.63b/drivers/serial/8250.c Mon Feb 24 18:29:35 2003
@@ -1989,7 +1989,7 @@
* port exists and is in use an error is returned. If the port
* is not currently in the table it is added.
*
- * The port is then probed and if neccessary the IRQ is autodetected
+ * The port is then probed and if necessary the IRQ is autodetected
* If this fails an error is returned.
*
* On success the port is ready to use and the line number is returned.
diff -ur 2.5.63a/drivers/usb/serial/kobil_sct.c 2.5.63b/drivers/usb/serial/kobil_sct.c
--- 2.5.63a/drivers/usb/serial/kobil_sct.c Mon Feb 24 11:05:42 2003
+++ 2.5.63b/drivers/usb/serial/kobil_sct.c Mon Feb 24 18:29:37 2003
@@ -159,7 +159,7 @@
}
usb_set_serial_port_data(serial->port, priv);
- // search for the neccessary endpoints
+ // search for the necessary endpoints
pdev = serial->dev;
actconfig = pdev->actconfig;
interface = actconfig->interface;
diff -ur 2.5.63a/fs/reiserfs/lbalance.c 2.5.63b/fs/reiserfs/lbalance.c
--- 2.5.63a/fs/reiserfs/lbalance.c Mon Feb 24 11:06:02 2003
+++ 2.5.63b/fs/reiserfs/lbalance.c Mon Feb 24 18:29:39 2003
@@ -1192,7 +1192,7 @@
}
- /* change item key if neccessary (when we paste before 0-th entry */
+ /* change item key if necessary (when we paste before 0-th entry */
if (!before)
{
set_le_ih_k_offset (ih, deh_offset(new_dehs));
diff -ur 2.5.63a/include/asm-arm/arch-sa1100/simpad.h 2.5.63b/include/asm-arm/arch-sa1100/simpad.h
--- 2.5.63a/include/asm-arm/arch-sa1100/simpad.h Mon Feb 24 11:05:14 2003
+++ 2.5.63b/include/asm-arm/arch-sa1100/simpad.h Mon Feb 24 18:29:41 2003
@@ -46,7 +46,7 @@
#define IRQ_GPIO_CF_IRQ IRQ_GPIO1
#define IRQ_GPIO_CF_CD IRQ_GPIO24
-// CS3 Latch is write only, a shadow is neccessary
+// CS3 Latch is write only, a shadow is necessary
#define CS3BUSTYPE unsigned volatile long
#define CS3_BASE 0xf1000000
diff -ur 2.5.63a/include/asm-m68k/page.h 2.5.63b/include/asm-m68k/page.h
--- 2.5.63a/include/asm-m68k/page.h Mon Feb 24 11:06:02 2003
+++ 2.5.63b/include/asm-m68k/page.h Mon Feb 24 18:29:43 2003
@@ -164,7 +164,7 @@
* NOTE: virtual isn't really correct, actually it should be the offset into the
* memory node, but we have no highmem, so that works for now.
* TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
- * of the shifts unneccessary.
+ * of the shifts unnecessary.
*/
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
diff -ur 2.5.63a/include/asm-s390/types.h 2.5.63b/include/asm-s390/types.h
--- 2.5.63a/include/asm-s390/types.h Mon Feb 24 11:05:32 2003
+++ 2.5.63b/include/asm-s390/types.h Mon Feb 24 18:29:45 2003
@@ -32,7 +32,7 @@
typedef unsigned long long __u64;
#endif
/* A address type so that arithmetic can be done on it & it can be upgraded to
- 64 bit when neccessary
+ 64 bit when necessary
*/
typedef __u32 addr_t;
typedef __s32 saddr_t;
diff -ur 2.5.63a/include/asm-s390x/types.h 2.5.63b/include/asm-s390x/types.h
--- 2.5.63a/include/asm-s390x/types.h Mon Feb 24 11:05:16 2003
+++ 2.5.63b/include/asm-s390x/types.h Mon Feb 24 18:29:47 2003
@@ -32,7 +32,7 @@
/*
* A address type so that arithmetic can be done on it & it can be upgraded to
- * 64 bit when neccessary
+ * 64 bit when necessary
*/
typedef unsigned long addr_t;
diff -ur 2.5.63a/kernel/cpufreq.c 2.5.63b/kernel/cpufreq.c
--- 2.5.63a/kernel/cpufreq.c Mon Feb 24 11:05:12 2003
+++ 2.5.63b/kernel/cpufreq.c Mon Feb 24 18:29:50 2003
@@ -1078,11 +1078,11 @@
down(&cpufreq_notifier_sem);
- /* adjust if neccessary - all reasons */
+ /* adjust if necessary - all reasons */
notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_ADJUST,
policy);
- /* adjust if neccessary - hardware incompatibility*/
+ /* adjust if necessary - hardware incompatibility*/
notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_INCOMPATIBLE,
policy);
diff -ur 2.5.63a/kernel/suspend.c 2.5.63b/kernel/suspend.c
--- 2.5.63a/kernel/suspend.c Mon Feb 24 11:05:13 2003
+++ 2.5.63b/kernel/suspend.c Mon Feb 24 18:29:52 2003
@@ -961,7 +961,7 @@
printk("Relocating pagedir");
if(!does_collide_order(old_pagedir, (unsigned long)old_pagedir, pagedir_order)) {
- printk("not neccessary\n");
+ printk("not necessary\n");
return 0;
}
diff -ur 2.5.63a/net/ipv4/netfilter/ip_conntrack_ftp.c 2.5.63b/net/ipv4/netfilter/ip_conntrack_ftp.c
--- 2.5.63a/net/ipv4/netfilter/ip_conntrack_ftp.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/net/ipv4/netfilter/ip_conntrack_ftp.c Mon Feb 24 18:29:54 2003
@@ -321,7 +321,7 @@
if (found == -1) {
/* We don't usually drop packets. After all, this is
connection tracking, not packet filtering.
- However, it is neccessary for accurate tracking in
+ However, it is necessary for accurate tracking in
this case. */
if (net_ratelimit())
printk("conntrack_ftp: partial %s %u+%u\n",
diff -ur 2.5.63a/net/ipv4/netfilter/ip_conntrack_irc.c 2.5.63b/net/ipv4/netfilter/ip_conntrack_irc.c
--- 2.5.63a/net/ipv4/netfilter/ip_conntrack_irc.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/net/ipv4/netfilter/ip_conntrack_irc.c Mon Feb 24 18:29:55 2003
@@ -199,7 +199,7 @@
LOCK_BH(&ip_irc_lock);
/* save position of address in dcc string,
- * neccessary for NAT */
+ * necessary for NAT */
DEBUGP("tcph->seq = %u\n", tcph->seq);
exp->seq = ntohl(tcph->seq) + (addr_beg_p - _data);
exp_irc_info->len = (addr_end_p - addr_beg_p);
diff -ur 2.5.63a/net/ipv4/netfilter/ip_nat_core.c 2.5.63b/net/ipv4/netfilter/ip_nat_core.c
--- 2.5.63a/net/ipv4/netfilter/ip_nat_core.c Mon Feb 24 11:05:10 2003
+++ 2.5.63b/net/ipv4/netfilter/ip_nat_core.c Mon Feb 24 18:29:57 2003
@@ -288,7 +288,7 @@
saved_ip = tuple->src.ip;
other_ipp = &tuple->src.ip;
}
- /* Don't do do_extra_mangle unless neccessary (overrides
+ /* Don't do do_extra_mangle unless necessary (overrides
explicit socket bindings, for example) */
orig_dstip = tuple->dst.ip;
diff -ur 2.5.63a/net/sched/sch_htb.c 2.5.63b/net/sched/sch_htb.c
--- 2.5.63a/net/sched/sch_htb.c Mon Feb 24 11:05:35 2003
+++ 2.5.63b/net/sched/sch_htb.c Mon Feb 24 18:30:00 2003
@@ -623,7 +623,7 @@
if (new_mode == cl->cmode)
return;
- if (cl->prio_activity) { /* not neccessary: speed optimization */
+ if (cl->prio_activity) { /* not necessary: speed optimization */
if (cl->cmode != HTB_CANT_SEND)
htb_deactivate_prios(q,cl);
cl->cmode = new_mode;