Spelling fixes for 2.5.63:
This patch fixes:
occured -> occurred
Fixes 135 occurrences in all.
diff -ur 2.5.63a/arch/i386/kernel/cpu/mcheck/non-fatal.c 2.5.63b/arch/i386/kernel/cpu/mcheck/non-fatal.c
--- 2.5.63a/arch/i386/kernel/cpu/mcheck/non-fatal.c Mon Feb 24 11:05:10 2003
+++ 2.5.63b/arch/i386/kernel/cpu/mcheck/non-fatal.c Mon Feb 24 18:14:06 2003
@@ -33,7 +33,7 @@
rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
if (high & (1<<31)) {
- printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occured on CPU %d.\n",
+ printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occurred on CPU %d.\n",
smp_processor_id());
printk (KERN_EMERG "Bank %d: %08x%08x\n", i, high, low);
diff -ur 2.5.63a/arch/ia64/sn/io/sn2/pcibr/pcibr_error.c 2.5.63b/arch/ia64/sn/io/sn2/pcibr/pcibr_error.c
--- 2.5.63a/arch/ia64/sn/io/sn2/pcibr/pcibr_error.c Mon Feb 24 11:05:06 2003
+++ 2.5.63b/arch/ia64/sn/io/sn2/pcibr/pcibr_error.c Mon Feb 24 18:14:08 2003
@@ -1806,7 +1806,7 @@
*
* CAUTION: Resetting bit BRIDGE_IRR_PCI_GRP_CLR, acknowledges
* a group of interrupts. If while handling this error,
- * some other error has occured, that would be
+ * some other error has occurred, that would be
* implicitly cleared by this write.
* Need a way to ensure we don't inadvertently clear some
* other errors.
diff -ur 2.5.63a/arch/mips/mips-boards/generic/pci.c 2.5.63b/arch/mips/mips-boards/generic/pci.c
--- 2.5.63a/arch/mips/mips-boards/generic/pci.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/arch/mips/mips-boards/generic/pci.c Mon Feb 24 18:14:10 2003
@@ -81,7 +81,7 @@
if (intr & (GT_INTRCAUSE_MASABORT0_BIT | GT_INTRCAUSE_TARABORT0_BIT))
{
- /* Error occured */
+ /* Error occurred */
/* Clear bits */
GT_WRITE( GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
diff -ur 2.5.63a/arch/mips64/mips-boards/generic/pci.c 2.5.63b/arch/mips64/mips-boards/generic/pci.c
--- 2.5.63a/arch/mips64/mips-boards/generic/pci.c Mon Feb 24 11:05:07 2003
+++ 2.5.63b/arch/mips64/mips-boards/generic/pci.c Mon Feb 24 18:14:12 2003
@@ -87,7 +87,7 @@
if (intr & (GT_INTRCAUSE_MASABORT0_BIT | GT_INTRCAUSE_TARABORT0_BIT))
{
- /* Error occured */
+ /* Error occurred */
/* Clear bits */
GT_WRITE( GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
diff -ur 2.5.63a/arch/ppc64/kernel/ras.c 2.5.63b/arch/ppc64/kernel/ras.c
--- 2.5.63a/arch/ppc64/kernel/ras.c Mon Feb 24 11:05:14 2003
+++ 2.5.63b/arch/ppc64/kernel/ras.c Mon Feb 24 18:14:15 2003
@@ -94,7 +94,7 @@
/*
* Handle power subsystem events (EPOW).
*
- * Presently we just log the event has occured. This should be fixed
+ * Presently we just log the event has occurred. This should be fixed
* to examine the type of power failure and take appropriate action where
* the time horizon permits something useful to be done.
*/
diff -ur 2.5.63a/arch/x86_64/kernel/bluesmoke.c 2.5.63b/arch/x86_64/kernel/bluesmoke.c
--- 2.5.63a/arch/x86_64/kernel/bluesmoke.c Mon Feb 24 11:05:43 2003
+++ 2.5.63b/arch/x86_64/kernel/bluesmoke.c Mon Feb 24 18:14:17 2003
@@ -120,7 +120,7 @@
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
if ((low | high) != 0) {
- printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occured on CPU %d.\n", smp_processor_id());
+ printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occurred on CPU %d.\n", smp_processor_id());
printk (KERN_EMERG "Bank %d: %08x%08x\n", i, high, low);
/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
diff -ur 2.5.63a/drivers/char/ser_a2232.c 2.5.63b/drivers/char/ser_a2232.c
--- 2.5.63a/drivers/char/ser_a2232.c Mon Feb 24 11:05:14 2003
+++ 2.5.63b/drivers/char/ser_a2232.c Mon Feb 24 18:14:21 2003
@@ -590,7 +590,7 @@
printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring.");
break;
default:
- printk("A2232: 65EC02 software broken, unknown event type %d occured.\n",ibuf[bufpos-1]);
+ printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]);
} /* event type switch */
break;
case A2232INCTL_CHAR:
@@ -599,7 +599,7 @@
bufpos++;
break;
default:
- printk("A2232: 65EC02 software broken, unknown data type %d occured.\n",cbuf[bufpos]);
+ printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]);
bufpos++;
} /* switch on input data type */
} /* while there's something in the buffer */
diff -ur 2.5.63a/drivers/char/synclink.c 2.5.63b/drivers/char/synclink.c
--- 2.5.63a/drivers/char/synclink.c Mon Feb 24 11:05:15 2003
+++ 2.5.63b/drivers/char/synclink.c Mon Feb 24 18:14:23 2003
@@ -7621,7 +7621,7 @@
status = info->rx_buffer_list[0].status;
if ( status & (BIT8 + BIT3 + BIT1) ) {
- /* receive error has occured */
+ /* receive error has occurred */
rc = FALSE;
} else {
if ( memcmp( info->tx_buffer_list[0].virt_addr ,
diff -ur 2.5.63a/drivers/hotplug/acpiphp_glue.c 2.5.63b/drivers/hotplug/acpiphp_glue.c
--- 2.5.63a/drivers/hotplug/acpiphp_glue.c Mon Feb 24 11:05:15 2003
+++ 2.5.63b/drivers/hotplug/acpiphp_glue.c Mon Feb 24 18:14:26 2003
@@ -1357,7 +1357,7 @@
if (sta != ACPI_STA_ALL) {
retval = acpiphp_disable_slot(slot);
if (retval) {
- err("Error occured in enabling\n");
+ err("Error occurred in enabling\n");
up(&slot->crit_sect);
goto err_exit;
}
@@ -1368,7 +1368,7 @@
if (sta == ACPI_STA_ALL) {
retval = acpiphp_enable_slot(slot);
if (retval) {
- err("Error occured in enabling\n");
+ err("Error occurred in enabling\n");
up(&slot->crit_sect);
goto err_exit;
}
diff -ur 2.5.63a/drivers/hotplug/ibmphp_core.c 2.5.63b/drivers/hotplug/ibmphp_core.c
--- 2.5.63a/drivers/hotplug/ibmphp_core.c Mon Feb 24 11:06:03 2003
+++ 2.5.63b/drivers/hotplug/ibmphp_core.c Mon Feb 24 18:14:32 2003
@@ -1343,12 +1343,12 @@
}
/* Check to see the error of why it failed */
if ((SLOT_POWER (slot_cur->status)) && !(SLOT_PWRGD (slot_cur->status)))
- err ("power fault occured trying to power up \n");
+ err ("power fault occurred trying to power up \n");
else if (SLOT_BUS_SPEED (slot_cur->status)) {
- err ("bus speed mismatch occured. please check current bus speed and card capability \n");
+ err ("bus speed mismatch occurred. please check current bus speed and card capability \n");
print_card_capability (slot_cur);
} else if (SLOT_BUS_MODE (slot_cur->ext_status)) {
- err ("bus mode mismatch occured. please check current bus mode and card capability \n");
+ err ("bus mode mismatch occurred. please check current bus mode and card capability \n");
print_card_capability (slot_cur);
}
ibmphp_update_slot_info (slot_cur);
@@ -1376,10 +1376,10 @@
if (SLOT_POWER (slot_cur->status) && !(SLOT_PWRGD (slot_cur->status))) {
faulted = 1;
- err ("power fault occured trying to power up... \n");
+ err ("power fault occurred trying to power up... \n");
} else if (SLOT_POWER (slot_cur->status) && (SLOT_BUS_SPEED (slot_cur->status))) {
faulted = 1;
- err ("bus speed mismatch occured. please check current bus speed and card capability \n");
+ err ("bus speed mismatch occurred. please check current bus speed and card capability \n");
print_card_capability (slot_cur);
}
/* Don't think this case will happen after above checks... but just in case, for paranoia sake */
diff -ur 2.5.63a/drivers/ide/arm/icside.c 2.5.63b/drivers/ide/arm/icside.c
--- 2.5.63a/drivers/ide/arm/icside.c Mon Feb 24 11:05:32 2003
+++ 2.5.63b/drivers/ide/arm/icside.c Mon Feb 24 18:14:34 2003
@@ -731,7 +731,7 @@
static int icside_dma_timeout(ide_drive_t *drive)
{
- printk(KERN_ERR "%s: DMA timeout occured: ", drive->name);
+ printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
if (icside_dma_test_irq(drive))
return 0;
diff -ur 2.5.63a/drivers/ide/ppc/pmac.c 2.5.63b/drivers/ide/ppc/pmac.c
--- 2.5.63a/drivers/ide/ppc/pmac.c Mon Feb 24 11:05:07 2003
+++ 2.5.63b/drivers/ide/ppc/pmac.c Mon Feb 24 18:14:36 2003
@@ -1400,7 +1400,7 @@
* to system memory when the disk interrupt occurs.
*
* The trick here is to increment drive->waiting_for_dma,
- * and return as if no interrupt occured. If the counter
+ * and return as if no interrupt occurred. If the counter
* reach a certain timeout value, we then return 1. If
* we really got the interrupt, it will happen right away
* again.
diff -ur 2.5.63a/drivers/ieee1394/ohci1394.c 2.5.63b/drivers/ieee1394/ohci1394.c
--- 2.5.63a/drivers/ieee1394/ohci1394.c Mon Feb 24 11:05:41 2003
+++ 2.5.63b/drivers/ieee1394/ohci1394.c Mon Feb 24 18:14:38 2003
@@ -2366,7 +2366,7 @@
if (!(node_id & 0x80000000)) {
PRINT(KERN_ERR, ohci->id,
"SelfID received, but NodeID invalid "
- "(probably new bus reset occured): %08X",
+ "(probably new bus reset occurred): %08X",
node_id);
goto selfid_not_valid;
}
diff -ur 2.5.63a/drivers/ieee1394/ohci1394.h 2.5.63b/drivers/ieee1394/ohci1394.h
--- 2.5.63a/drivers/ieee1394/ohci1394.h Mon Feb 24 11:05:09 2003
+++ 2.5.63b/drivers/ieee1394/ohci1394.h Mon Feb 24 18:14:42 2003
@@ -405,12 +405,12 @@
truncated */
#define EVT_OVERRUN 0x5 /* A recv FIFO overflowed on reception of ISO
packet */
-#define EVT_DESCRIPTOR_READ 0x6 /* An unrecoverable error occured while host was
+#define EVT_DESCRIPTOR_READ 0x6 /* An unrecoverable error occurred while host was
reading a descriptor block */
-#define EVT_DATA_READ 0x7 /* An error occured while host controller was
+#define EVT_DATA_READ 0x7 /* An error occurred while host controller was
attempting to read from host memory in the data
stage of descriptor processing */
-#define EVT_DATA_WRITE 0x8 /* An error occured while host controller was
+#define EVT_DATA_WRITE 0x8 /* An error occurred while host controller was
attempting to write either during the data stage
of descriptor processing, or when processing a single
16-bit host memory write */
diff -ur 2.5.63a/drivers/ieee1394/raw1394.c 2.5.63b/drivers/ieee1394/raw1394.c
--- 2.5.63a/drivers/ieee1394/raw1394.c Mon Feb 24 11:05:05 2003
+++ 2.5.63b/drivers/ieee1394/raw1394.c Mon Feb 24 18:14:44 2003
@@ -2440,7 +2440,7 @@
spin_unlock_irq(&host_info_lock);
if (fail > 0) {
printk(KERN_ERR "raw1394: during addr_list-release "
- "error(s) occured \n");
+ "error(s) occurred \n");
}
while (!done) {
diff -ur 2.5.63a/drivers/media/dvb/av7110/saa7146.c 2.5.63b/drivers/media/dvb/av7110/saa7146.c
--- 2.5.63a/drivers/media/dvb/av7110/saa7146.c Mon Feb 24 11:05:10 2003
+++ 2.5.63b/drivers/media/dvb/av7110/saa7146.c Mon Feb 24 18:14:48 2003
@@ -1396,7 +1396,7 @@
saa7146_write(saa->mem, MC2, (MASK_00 | MASK_16));
}
- /* if any error is still present, a fatal error has occured ... */
+ /* if any error is still present, a fatal error has occurred ... */
if ( SAA7146_I2C_BBR != (status = i2c_status_check(saa)) ) {
hprintk("saa7146: i2c_reset: fatal error, status:0x%08x\n",status);
return -EIO;
@@ -1444,7 +1444,7 @@
/* check for some other mysterious error; we don't handle this here */
if ( 0 != ( status & 0xff)) {
- hprintk("saa7146: i2c_write_out: some error has occured\n");
+ hprintk("saa7146: i2c_write_out: some error has occurred\n");
return -EIO;
}
@@ -1570,7 +1570,7 @@
/* check, if DEBI still active */
u32 psr = saa7146_read(saa->mem, PSR);
if (0 != (psr & SPCI_DEBI_S)) {
- /* check, if error occured */
+ /* check, if error occurred */
/* if ( 0 != (saa7146_read(saa->mem, SSR) & (MASK_23|MASK_22))) { */
if ( 0 != (saa7146_read(saa->mem, SSR) & (MASK_22))) {
/* clear error status and indicate error */
diff -ur 2.5.63a/drivers/media/dvb/av7110/saa7146_core.c 2.5.63b/drivers/media/dvb/av7110/saa7146_core.c
--- 2.5.63a/drivers/media/dvb/av7110/saa7146_core.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/drivers/media/dvb/av7110/saa7146_core.c Mon Feb 24 18:14:50 2003
@@ -222,7 +222,7 @@
* we do not start the whole rps1-engine...
*/
- /* if address-error occured, don't retry */
+ /* if address-error occurred, don't retry */
if (i2c_write_out(a, &a->i2c[i], SAA7146_I2C_TIMEOUT) < 0) {
hprintk (KERN_ERR "saa7146_core.o: "
"i2c error in address phase\n");
diff -ur 2.5.63a/drivers/message/fusion/mptscsih.c 2.5.63b/drivers/message/fusion/mptscsih.c
--- 2.5.63a/drivers/message/fusion/mptscsih.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/drivers/message/fusion/mptscsih.c Mon Feb 24 18:14:52 2003
@@ -116,7 +116,7 @@
#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */
#define MPT_ICFLAG_PHYS_DISK 0x04 /* Any SCSI IO but do Phys Disk Format */
#define MPT_ICFLAG_TAGGED_CMD 0x08 /* Do tagged IO */
-#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occured with this command */
+#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */
#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */
typedef struct _internal_cmd {
diff -ur 2.5.63a/drivers/mtd/devices/blkmtd.c 2.5.63b/drivers/mtd/devices/blkmtd.c
--- 2.5.63a/drivers/mtd/devices/blkmtd.c Mon Feb 24 11:05:05 2003
+++ 2.5.63b/drivers/mtd/devices/blkmtd.c Mon Feb 24 18:14:54 2003
@@ -394,7 +394,7 @@
err = brw_kiovec(WRITE, 1, &iobuf, item->rawdevice->binding, blocks, item->rawdevice->sector_size);
DEBUG(3, "bklmtd: write_task: done, err = %d\n", err);
if(err != (cursectors << item->rawdevice->sector_bits)) {
- /* if an error occured - set this to exit the loop */
+ /* if an error occurred - set this to exit the loop */
sectorcnt = 0;
} else {
sectorcnt -= cursectors;
diff -ur 2.5.63a/drivers/net/e100/e100_eeprom.c 2.5.63b/drivers/net/e100/e100_eeprom.c
--- 2.5.63a/drivers/net/e100/e100_eeprom.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/drivers/net/e100/e100_eeprom.c Mon Feb 24 18:14:56 2003
@@ -138,7 +138,7 @@
// is then passed to the read/write functions.
//
// Returns:
-// Size of the eeprom, or zero if an error occured
+// Size of the eeprom, or zero if an error occurred
//----------------------------------------------------------------------------------------
u16
e100_eeprom_size(struct e100_private *adapter)
diff -ur 2.5.63a/drivers/net/sb1250-mac.c 2.5.63b/drivers/net/sb1250-mac.c
--- 2.5.63a/drivers/net/sb1250-mac.c Mon Feb 24 11:05:44 2003
+++ 2.5.63b/drivers/net/sb1250-mac.c Mon Feb 24 18:14:59 2003
@@ -512,7 +512,7 @@
* regidx = index of register to read
*
* Return value:
- * value read, or 0 if an error occured.
+ * value read, or 0 if an error occurred.
********************************************************************* */
static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
@@ -554,7 +554,7 @@
SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT);
/*
- * If an error occured, the PHY will signal '1' back
+ * If an error occurred, the PHY will signal '1' back
*/
error = SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN;
diff -ur 2.5.63a/drivers/net/sk98lin/h/lm80.h 2.5.63b/drivers/net/sk98lin/h/lm80.h
--- 2.5.63a/drivers/net/sk98lin/h/lm80.h Mon Feb 24 11:05:43 2003
+++ 2.5.63b/drivers/net/sk98lin/h/lm80.h Mon Feb 24 18:15:02 2003
@@ -126,7 +126,7 @@
#define LM80_IS_BTI (1<<1) /* state of BTI# pin */
#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */
#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */
-#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */
+#define LM80_IS_CI (1<<4) /* Chassis Intrusion occurred */
#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */
/* bit 6 and 7 are reserved in LM80_ISRC_2 */
#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */
diff -ur 2.5.63a/drivers/net/sk98lin/h/xmac_ii.h 2.5.63b/drivers/net/sk98lin/h/xmac_ii.h
--- 2.5.63a/drivers/net/sk98lin/h/xmac_ii.h Mon Feb 24 11:05:41 2003
+++ 2.5.63b/drivers/net/sk98lin/h/xmac_ii.h Mon Feb 24 18:16:10 2003
@@ -413,7 +413,7 @@
#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */
#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */
#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */
-#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */
+#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occurred */
#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */
#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */
#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */
diff -ur 2.5.63a/drivers/net/sk98lin/skgepnmi.c 2.5.63b/drivers/net/sk98lin/skgepnmi.c
--- 2.5.63a/drivers/net/sk98lin/skgepnmi.c Mon Feb 24 11:05:38 2003
+++ 2.5.63b/drivers/net/sk98lin/skgepnmi.c Mon Feb 24 18:16:28 2003
@@ -1639,7 +1639,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed
- * SK_PNMI_ERR_GENERAL A general severe internal error occured
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take
* the data.
* SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown
@@ -1678,7 +1678,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -1722,7 +1722,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -1766,7 +1766,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed
- * SK_PNMI_ERR_GENERAL A general severe internal error occured
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take
* the data.
* SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist
@@ -1944,7 +1944,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -1983,7 +1983,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -2934,7 +2934,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -3002,7 +3002,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -3137,7 +3137,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -3280,7 +3280,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -3427,7 +3427,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -3639,7 +3639,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -3758,7 +3758,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -4003,7 +4003,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -4482,7 +4482,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -5189,7 +5189,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -5498,7 +5498,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -5698,7 +5698,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -6362,7 +6362,7 @@
*
* Returns:
* SK_PNMI_ERR_OK The request was successfully performed.
- * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occurred.
* SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
* the correct data (e.g. a 32bit value is
* needed, but a 16 bit value was passed).
@@ -7364,7 +7364,7 @@
*
* Description:
* The trap buffer stores various events. A user application somehow
- * gets notified that an event occured and retrieves the trap buffer
+ * gets notified that an event occurred and retrieves the trap buffer
* contens (or simply polls the buffer). The buffer is organized as
* a ring which stores the newest traps at the beginning. The oldest
* traps are overwritten by the newest ones. Each trap entry has a
diff -ur 2.5.63a/drivers/net/sk98lin/skgesirq.c 2.5.63b/drivers/net/sk98lin/skgesirq.c
--- 2.5.63a/drivers/net/sk98lin/skgesirq.c Mon Feb 24 11:05:04 2003
+++ 2.5.63b/drivers/net/sk98lin/skgesirq.c Mon Feb 24 18:16:37 2003
@@ -736,14 +736,14 @@
/* Check whether XMACs are correctly initialized */
if ((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) &&
!pAC->GIni.GP[MAC_1].PState) {
- /* XMAC was not initialized but Packet timeout occured */
+ /* XMAC was not initialized but Packet timeout occurred */
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
SKERR_SIRQ_E004MSG);
}
if ((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) &&
!pAC->GIni.GP[MAC_2].PState) {
- /* XMAC was not initialized but Packet timeout occured */
+ /* XMAC was not initialized but Packet timeout occurred */
SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
SKERR_SIRQ_E005MSG);
}
@@ -1111,7 +1111,7 @@
* otherwise the Linux driver will have a problem.
*/
/*
- * We received a bunch of frames or no CRC error occured on the
+ * We received a bunch of frames or no CRC error occurred on the
* network -> ok.
*/
pPrt->PPrevRx = RxCts;
@@ -1379,7 +1379,7 @@
pPrt->PAutoNegTOCt ++;
/*
- * Timeout occured.
+ * Timeout occurred.
* What do we need now?
*/
SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
@@ -1389,7 +1389,7 @@
if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
/*
- * Timeout occured
+ * Timeout occurred
* Set Link manually up.
*/
SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
@@ -1872,7 +1872,7 @@
pPrt->PAutoNegTimeOut ++;
if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
/*
- * Timeout occured.
+ * Timeout occurred.
* What do we need now?
*/
SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
@@ -1882,7 +1882,7 @@
if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
/*
- * Timeout occured
+ * Timeout occurred
* Set Link manually up.
*/
SkHWSenseSetNext(pAC, IoC, Port,
diff -ur 2.5.63a/drivers/net/sk98lin/skqueue.c 2.5.63b/drivers/net/sk98lin/skqueue.c
--- 2.5.63a/drivers/net/sk98lin/skqueue.c Mon Feb 24 11:05:12 2003
+++ 2.5.63b/drivers/net/sk98lin/skqueue.c Mon Feb 24 18:16:39 2003
@@ -153,7 +153,7 @@
* send command to state machine
* end
* return error reported by individual Event function
- * 0 if no error occured.
+ * 0 if no error occurred.
*/
int SkEventDispatcher(
SK_AC *pAC, /* Adapters Context */
diff -ur 2.5.63a/drivers/net/tulip/interrupt.c 2.5.63b/drivers/net/tulip/interrupt.c
--- 2.5.63a/drivers/net/tulip/interrupt.c Mon Feb 24 11:05:13 2003
+++ 2.5.63b/drivers/net/tulip/interrupt.c Mon Feb 24 18:16:42 2003
@@ -487,7 +487,7 @@
* to the 21142/3 docs that is).
* -- rmk
*/
- printk(KERN_ERR "%s: (%lu) System Error occured (%d)\n",
+ printk(KERN_ERR "%s: (%lu) System Error occurred (%d)\n",
dev->name, tp->nir, error);
}
/* Clear all error sources, included undocumented ones! */
diff -ur 2.5.63a/drivers/net/wan/sbni.c 2.5.63b/drivers/net/wan/sbni.c
--- 2.5.63a/drivers/net/wan/sbni.c Mon Feb 24 11:05:15 2003
+++ 2.5.63b/drivers/net/wan/sbni.c Mon Feb 24 18:16:44 2003
@@ -684,7 +684,7 @@
/*
* if CRC is right but framelen incorrect then transmitter
- * error was occured... drop entire packet
+ * error was occurred... drop entire packet
*/
else if( (frame_ok = skip_tail( dev->base_addr, framelen, crc ))
!= 0 )
diff -ur 2.5.63a/drivers/net/wan/sdla_fr.c 2.5.63b/drivers/net/wan/sdla_fr.c
--- 2.5.63a/drivers/net/wan/sdla_fr.c Mon Feb 24 11:06:01 2003
+++ 2.5.63b/drivers/net/wan/sdla_fr.c Mon Feb 24 18:16:46 2003
@@ -2071,7 +2071,7 @@
++card->statistics.isr_intr_test;
break;
- case FR_INTR_DLC: /* Event interrupt occured */
+ case FR_INTR_DLC: /* Event interrupt occurred */
mbox->cmd.command = FR_READ_STATUS;
mbox->cmd.length = 0;
err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
diff -ur 2.5.63a/drivers/net/wan/sdla_ppp.c 2.5.63b/drivers/net/wan/sdla_ppp.c
--- 2.5.63a/drivers/net/wan/sdla_ppp.c Mon Feb 24 11:05:11 2003
+++ 2.5.63b/drivers/net/wan/sdla_ppp.c Mon Feb 24 18:16:48 2003
@@ -2004,7 +2004,7 @@
(unsigned long)card->u.p.txbuf, *card->u.p.txbuf_next,
(unsigned long)card->rxmb, *card->u.p.rxbuf_next);
- /* Tell timer interrupt that PPP event occured */
+ /* Tell timer interrupt that PPP event occurred */
ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_PPP_EVENT;
flags->imask |= PPP_INTR_TIMER;
diff -ur 2.5.63a/drivers/net/wan/sdla_x25.c 2.5.63b/drivers/net/wan/sdla_x25.c
--- 2.5.63a/drivers/net/wan/sdla_x25.c Mon Feb 24 11:05:38 2003
+++ 2.5.63b/drivers/net/wan/sdla_x25.c Mon Feb 24 18:16:57 2003
@@ -3178,7 +3178,7 @@
* when clearing a call because protocol encapsulation is not
* supported.
* 4. If an incoming call is received while a call request is
- * pending (i.e. call collision has occured), the incoming call
+ * pending (i.e. call collision has occurred), the incoming call
* shall be rejected and call request shall be retried.
*====================================================================*/
diff -ur 2.5.63a/drivers/parport/parport_pc.c 2.5.63b/drivers/parport/parport_pc.c
--- 2.5.63a/drivers/parport/parport_pc.c Mon Feb 24 11:05:47 2003
+++ 2.5.63b/drivers/parport/parport_pc.c Mon Feb 24 18:17:00 2003
@@ -422,7 +422,7 @@
status = inb (STATUS (port));
if (status & 0x01) {
/* EPP timeout should never occur... */
- printk (KERN_DEBUG "%s: EPP timeout occured while talking to "
+ printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
"w91284pic (should not have done)\n", port->name);
clear_epp_timeout (port);
}
diff -ur 2.5.63a/drivers/s390/net/iucv.h 2.5.63b/drivers/s390/net/iucv.h
--- 2.5.63a/drivers/s390/net/iucv.h Mon Feb 24 11:06:02 2003
+++ 2.5.63b/drivers/s390/net/iucv.h Mon Feb 24 18:17:02 2003
@@ -214,7 +214,7 @@
* pgm_data- application data passed to interrupt handlers
* Output: NA
* Return: address of handler
- * (0) - Error occured, registration not completed.
+ * (0) - Error occurred, registration not completed.
* NOTE: Exact cause of failure will be recorded in syslog.
*/
iucv_handle_t iucv_register_program (uchar pgmname[16],
diff -ur 2.5.63a/drivers/scsi/gdth.h 2.5.63b/drivers/scsi/gdth.h
--- 2.5.63a/drivers/scsi/gdth.h Mon Feb 24 11:05:15 2003
+++ 2.5.63b/drivers/scsi/gdth.h Mon Feb 24 18:17:11 2003
@@ -915,7 +915,7 @@
unchar ldr_no; /* log. drive no. */
unchar rw_attribs; /* r/w attributes */
unchar cluster_type; /* cluster properties */
- unchar media_changed; /* Flag:MOUNT/UNMOUNT occured */
+ unchar media_changed; /* Flag:MOUNT/UNMOUNT occurred*/
ulong32 start_sec; /* start sector */
} hdr[MAX_LDRIVES]; /* host drives */
struct {
diff -ur 2.5.63a/drivers/scsi/ips.c 2.5.63b/drivers/scsi/ips.c
--- 2.5.63a/drivers/scsi/ips.c Mon Feb 24 11:05:05 2003
+++ 2.5.63b/drivers/scsi/ips.c Mon Feb 24 18:17:21 2003
@@ -1801,7 +1801,7 @@
/* */
/* Routine Description: */
/* Fill in a single scb sg_list element from an address */
-/* return a -1 if a breakup occured */
+/* return a -1 if a breakup occurred */
/****************************************************************************/
static inline int ips_fill_scb_sg_single(ips_ha_t *ha, dma_addr_t busaddr,
ips_scb_t *scb, int indx, unsigned int e_len)
diff -ur 2.5.63a/drivers/scsi/nsp32.c 2.5.63b/drivers/scsi/nsp32.c
--- 2.5.63a/drivers/scsi/nsp32.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/drivers/scsi/nsp32.c Mon Feb 24 18:18:04 2003
@@ -939,7 +939,7 @@
/*
* If reselected New ID:LUN is not existed
* or current nexus is not existed, unexpected
- * reselection is occured. Send reject message.
+ * reselection is occurred. Send reject message.
*/
if (newid >= MAX_TARGET || newlun >= MAX_LUN) {
nsp32_msg(KERN_WARNING, "unknown id/lun");
@@ -1333,7 +1333,7 @@
/*
* AutoSCSI Interrupt.
- * Note: This interrupt is occured when AutoSCSI is finished. Then
+ * Note: This interrupt is occurred when AutoSCSI is finished. Then
* check SCSIEXECUTEPHASE, and do appropriate action. Each phases are
* recorded when AutoSCSI sequencer has been processed.
*/
@@ -1345,7 +1345,7 @@
/* Selection Timeout, go busfree phase. */
if (auto_stat & SELECTION_TIMEOUT) {
nsp32_dbg(NSP32_DEBUG_INTR,
- "selection timeout occured");
+ "selection timeout occurred");
SCpnt->result = DID_TIME_OUT << 16;
nsp32_scsi_done(data, SCpnt);
@@ -1357,7 +1357,7 @@
* MsgOut phase was processed.
* If MSG_IN_OCCUER is not set, then MsgOut phase is
* completed. Thus, msgoutlen must reset. Otherwise,
- * nothing to do here. If MSG_OUT_OCCUER is occured,
+ * nothing to do here. If MSG_OUT_OCCUER is occurred,
* then we will encounter the condition and check.
*/
if (!(auto_stat & MSG_IN_OCCUER) &&
@@ -1515,7 +1515,7 @@
/* PCI_IRQ */
if (irq_stat & IRQSTATUS_PCI_IRQ) {
- nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occured");
+ nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred");
/* Do nothing */
}
@@ -1524,7 +1524,7 @@
nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
/*
* TODO: To be implemented improving bus master
- * transfer reliablity when BMCNTERR is occured in
+ * transfer reliablity when BMCNTERR is occurred in
* AutoSCSI phase described in specification.
*/
}
@@ -2300,7 +2300,7 @@
} else {
/*
* On the contrary, if unexpected bus free is
- * occured, then negotiation is failed. Fall
+ * occurred, then negotiation is failed. Fall
* back to ASYNC mode.
*/
nsp32_set_async(data, data->curtarget);
@@ -2338,7 +2338,7 @@
return (TRUE);
} else {
/* Unexpected bus free */
- nsp32_msg(KERN_WARNING, "unexpected bus free occured");
+ nsp32_msg(KERN_WARNING, "unexpected bus free occurred");
/* DID_ERROR? */
//SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0);
@@ -2426,7 +2426,7 @@
"enter: msgoutlen: 0x%x", data->msgoutlen);
/*
- * If MsgOut phase is occured without having any
+ * If MsgOut phase is occurred without having any
* message, then No_Operation is sent (SCSI-2).
*/
if (data->msgoutlen == 0) {
@@ -2614,7 +2614,7 @@
case COMMAND_COMPLETE:
case DISCONNECT:
/*
- * These messages should not be occured.
+ * These messages should not be occurred.
* They should be processed on AutoSCSI sequencer.
*/
nsp32_msg(KERN_WARNING,
@@ -2654,7 +2654,7 @@
case SAVE_POINTERS:
/*
- * These messages should not be occured.
+ * These messages should not be occurred.
* They should be processed on AutoSCSI sequencer.
*/
nsp32_msg (KERN_WARNING,
diff -ur 2.5.63a/drivers/scsi/sd.c 2.5.63b/drivers/scsi/sd.c
--- 2.5.63a/drivers/scsi/sd.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/drivers/scsi/sd.c Mon Feb 24 18:18:07 2003
@@ -678,7 +678,7 @@
*/
/* An error occurred */
- if (driver_byte(result) != 0 && /* An error occured */
+ if (driver_byte(result) != 0 && /* An error occurred */
SCpnt->sense_buffer[0] == 0xF0) { /* Sense data is valid */
switch (SCpnt->sense_buffer[2]) {
case MEDIUM_ERROR:
@@ -719,7 +719,7 @@
case RECOVERED_ERROR:
/*
- * An error occured, but it recovered. Inform the
+ * An error occurred, but it recovered. Inform the
* user, but make sure that it's not treated as a
* hard error.
*/
diff -ur 2.5.63a/drivers/usb/image/microtek.c 2.5.63b/drivers/usb/image/microtek.c
--- 2.5.63a/drivers/usb/image/microtek.c Mon Feb 24 11:06:03 2003
+++ 2.5.63b/drivers/usb/image/microtek.c Mon Feb 24 18:18:09 2003
@@ -572,7 +572,7 @@
MTS_DEBUG_GOT_HERE();
context->srb->result = DID_ABORT<<16;
} else {
- /* A genuine error has occured */
+ /* A genuine error has occurred */
MTS_DEBUG_GOT_HERE();
context->srb->result = DID_ERROR<<16;
diff -ur 2.5.63a/drivers/usb/storage/freecom.c 2.5.63b/drivers/usb/storage/freecom.c
--- 2.5.63a/drivers/usb/storage/freecom.c Mon Feb 24 11:06:02 2003
+++ 2.5.63b/drivers/usb/storage/freecom.c Mon Feb 24 18:18:11 2003
@@ -240,7 +240,7 @@
* may not work, but that is a condition that should never happen.
*/
while (fst->Status & FCM_STATUS_BUSY) {
- US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occured!\n");
+ US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occurred!\n");
US_DEBUGP("fst->Status is %x\n", fst->Status);
/* Get the status again */
diff -ur 2.5.63a/fs/eventpoll.c 2.5.63b/fs/eventpoll.c
--- 2.5.63a/fs/eventpoll.c Mon Feb 24 11:05:16 2003
+++ 2.5.63b/fs/eventpoll.c Mon Feb 24 18:18:13 2003
@@ -950,7 +950,7 @@
}
else
{
- /* We have to signal that an error occured */
+ /* We have to signal that an error occurred */
epi->nwait = -1;
}
}
diff -ur 2.5.63a/fs/nfsd/nfs4xdr.c 2.5.63b/fs/nfsd/nfs4xdr.c
--- 2.5.63a/fs/nfsd/nfs4xdr.c Mon Feb 24 11:05:41 2003
+++ 2.5.63b/fs/nfsd/nfs4xdr.c Mon Feb 24 18:18:15 2003
@@ -1770,7 +1770,7 @@
* XXX: By default, the ->readlink() VFS op will truncate symlinks
* if they would overflow the buffer. Is this kosher in NFSv4? If
* not, one easy fix is: if ->readlink() precisely fills the buffer,
- * assume that truncation occured, and return NFS4ERR_RESOURCE.
+ * assume that truncation occurred, and return NFS4ERR_RESOURCE.
*/
nfserr = nfsd_readlink(readlink->rl_rqstp, readlink->rl_fhp, page, &maxcount);
if (nfserr)
diff -ur 2.5.63a/fs/ntfs/layout.h 2.5.63b/fs/ntfs/layout.h
--- 2.5.63a/fs/ntfs/layout.h Mon Feb 24 11:05:33 2003
+++ 2.5.63b/fs/ntfs/layout.h Mon Feb 24 18:18:17 2003
@@ -152,7 +152,7 @@
* been written to disk. The values 0 and -1 (ie. 0xffff) are not used. All
* last u16's of each sector have to be equal to the usn (during reading) or
* are set to it (during writing). If they are not, an incomplete multi sector
- * transfer has occured when the data was written.
+ * transfer has occurred when the data was written.
* The maximum size for the update sequence array is fixed to:
* maximum size = usa_ofs + (usa_count * 2) = 510 bytes
* The 510 bytes comes from the fact that the last u16 in the array has to
diff -ur 2.5.63a/fs/ntfs/namei.c 2.5.63b/fs/ntfs/namei.c
--- 2.5.63a/fs/ntfs/namei.c Mon Feb 24 11:05:39 2003
+++ 2.5.63b/fs/ntfs/namei.c Mon Feb 24 18:18:19 2003
@@ -233,7 +233,7 @@
m = NULL;
ctx = NULL;
- /* Check if a conversion error occured. */
+ /* Check if a conversion error occurred. */
if ((signed)nls_name.len < 0) {
err = (signed)nls_name.len;
goto err_out;
diff -ur 2.5.63a/fs/quota_v2.c 2.5.63b/fs/quota_v2.c
--- 2.5.63a/fs/quota_v2.c Mon Feb 24 11:05:40 2003
+++ 2.5.63b/fs/quota_v2.c Mon Feb 24 18:18:22 2003
@@ -415,7 +415,7 @@
if (!dquot->dq_off)
if ((ret = dq_insert_tree(dquot)) < 0) {
- printk(KERN_ERR "VFS: Error %Zd occured while creating quota.\n", ret);
+ printk(KERN_ERR "VFS: Error %Zd occurred while creating quota.\n", ret);
return ret;
}
filp = sb_dqopt(dquot->dq_sb)->files[type];
diff -ur 2.5.63a/fs/xfs/xfs_mount.c 2.5.63b/fs/xfs/xfs_mount.c
--- 2.5.63a/fs/xfs/xfs_mount.c Mon Feb 24 11:05:15 2003
+++ 2.5.63b/fs/xfs/xfs_mount.c Mon Feb 24 18:18:24 2003
@@ -1023,7 +1023,7 @@
/*
* If the xfs quota code isn't installed,
* we have to reset the quotachk'd bit.
- * If an error occured, qm_mount_quotas code
+ * If an error occurred, qm_mount_quotas code
* has already disabled quotas. So, just finish
* mounting, and get on with the boring life
* without disk quotas.
diff -ur 2.5.63a/include/asm-ia64/sn/pci/pcibr_private.h 2.5.63b/include/asm-ia64/sn/pci/pcibr_private.h
--- 2.5.63a/include/asm-ia64/sn/pci/pcibr_private.h Mon Feb 24 11:05:04 2003
+++ 2.5.63b/include/asm-ia64/sn/pci/pcibr_private.h Mon Feb 24 18:18:26 2003
@@ -578,7 +578,7 @@
#ifdef LATER
toid_t bserr_toutid; /* Timeout started by errintr */
#endif /* LATER */
- iopaddr_t bserr_addr; /* Address where error occured */
+ iopaddr_t bserr_addr; /* Address where error occurred */
uint64_t bserr_intstat; /* interrupts active at error dump */
} bs_errinfo;
diff -ur 2.5.63a/include/asm-ia64/sn/sn2/shub_mmr.h 2.5.63b/include/asm-ia64/sn/sn2/shub_mmr.h
--- 2.5.63a/include/asm-ia64/sn/sn2/shub_mmr.h Mon Feb 24 11:05:38 2003
+++ 2.5.63b/include/asm-ia64/sn/sn2/shub_mmr.h Mon Feb 24 18:18:42 2003
@@ -2720,7 +2720,7 @@
#define SH_NI0_LLP_ERR_RETRY_COUNT_MASK 0x0000000000ff0000
/* SH_NI0_LLP_ERR_RETRY_TIMEOUT */
-/* Description: Indicates a retry timeout has occured */
+/* Description: Indicates a retry timeout has occurred */
#define SH_NI0_LLP_ERR_RETRY_TIMEOUT_SHFT 24
#define SH_NI0_LLP_ERR_RETRY_TIMEOUT_MASK 0x0000000001000000
@@ -3017,7 +3017,7 @@
#define SH_NI1_LLP_ERR_RETRY_COUNT_MASK 0x0000000000ff0000
/* SH_NI1_LLP_ERR_RETRY_TIMEOUT */
-/* Description: Indicates a retry timeout has occured */
+/* Description: Indicates a retry timeout has occurred */
#define SH_NI1_LLP_ERR_RETRY_TIMEOUT_SHFT 24
#define SH_NI1_LLP_ERR_RETRY_TIMEOUT_MASK 0x0000000001000000
@@ -26034,7 +26034,7 @@
#define SH_PIO_WRITE_STATUS_0_INIT 0x8000000000000000
/* SH_PIO_WRITE_STATUS_0_MULTI_WRITE_ERROR */
-/* Description: More than one PIO write error occured */
+/* Description: More than one PIO write error occurred */
#define SH_PIO_WRITE_STATUS_0_MULTI_WRITE_ERROR_SHFT 0
#define SH_PIO_WRITE_STATUS_0_MULTI_WRITE_ERROR_MASK 0x0000000000000001
@@ -26073,7 +26073,7 @@
#define SH_PIO_WRITE_STATUS_1_INIT 0x8000000000000000
/* SH_PIO_WRITE_STATUS_1_MULTI_WRITE_ERROR */
-/* Description: More than one PIO write error occured */
+/* Description: More than one PIO write error occurred */
#define SH_PIO_WRITE_STATUS_1_MULTI_WRITE_ERROR_SHFT 0
#define SH_PIO_WRITE_STATUS_1_MULTI_WRITE_ERROR_MASK 0x0000000000000001
diff -ur 2.5.63a/include/asm-m68knommu/MC68328.h 2.5.63b/include/asm-m68knommu/MC68328.h
--- 2.5.63a/include/asm-m68knommu/MC68328.h Mon Feb 24 11:05:12 2003
+++ 2.5.63b/include/asm-m68knommu/MC68328.h Mon Feb 24 18:18:49 2003
@@ -1237,10 +1237,10 @@
#define RTCISR WORD_REF(RTCISR_ADDR)
#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occured */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occured */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occured */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occured */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
/*
* RTC Interrupt Enable Register
diff -ur 2.5.63a/include/asm-m68knommu/MC68EZ328.h 2.5.63b/include/asm-m68knommu/MC68EZ328.h
--- 2.5.63a/include/asm-m68knommu/MC68EZ328.h Mon Feb 24 11:05:47 2003
+++ 2.5.63b/include/asm-m68knommu/MC68EZ328.h Mon Feb 24 18:18:56 2003
@@ -1071,19 +1071,19 @@
#define RTCISR WORD_REF(RTCISR_ADDR)
#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occured */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occured */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occured */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occured */
-#define RTCISR_HR 0x0020 /* 1-hour interrupt has occured */
-#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occured */
-#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occured */
-#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occured */
-#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occured */
-#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occured */
-#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occured */
-#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occured */
-#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occured */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
+#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
+#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
+#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
+#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
+#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
+#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
+#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
/*
* RTC Interrupt Enable Register
diff -ur 2.5.63a/include/asm-m68knommu/MC68VZ328.h 2.5.63b/include/asm-m68knommu/MC68VZ328.h
--- 2.5.63a/include/asm-m68knommu/MC68VZ328.h Mon Feb 24 11:05:14 2003
+++ 2.5.63b/include/asm-m68knommu/MC68VZ328.h Mon Feb 24 18:19:01 2003
@@ -1167,19 +1167,19 @@
#define RTCISR WORD_REF(RTCISR_ADDR)
#define RTCISR_SW 0x0001 /* Stopwatch timed out */
-#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occured */
-#define RTCISR_ALM 0x0004 /* Alarm interrupt has occured */
-#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occured */
-#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occured */
-#define RTCISR_HR 0x0020 /* 1-hour interrupt has occured */
-#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occured */
-#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occured */
-#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occured */
-#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occured */
-#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occured */
-#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occured */
-#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occured */
-#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occured */
+#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
+#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
+#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
+#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */
+#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */
+#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */
+#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */
+#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */
+#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */
+#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */
+#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */
/*
* RTC Interrupt Enable Register
diff -ur 2.5.63a/include/asm-parisc/pdc_chassis.h 2.5.63b/include/asm-parisc/pdc_chassis.h
--- 2.5.63a/include/asm-parisc/pdc_chassis.h Mon Feb 24 11:05:06 2003
+++ 2.5.63b/include/asm-parisc/pdc_chassis.h Mon Feb 24 18:19:04 2003
@@ -116,7 +116,7 @@
PDC_CHASSIS_LED_ATTN_OFF | \
PDC_CHASSIS_LED_FAULT_ON | \
PDC_CHASSIS_LED_VALID )
-/* Unexpected reboot occured - Executing non-OS code */
+/* Unexpected reboot occurred - Executing non-OS code */
#define PDC_CHASSIS_LSTATE_NONOS_UNEXP (PDC_CHASSIS_LED_RUN_FLASH | \
PDC_CHASSIS_LED_ATTN_OFF | \
PDC_CHASSIS_LED_FAULT_FLASH | \
diff -ur 2.5.63a/include/asm-s390/processor.h 2.5.63b/include/asm-s390/processor.h
--- 2.5.63a/include/asm-s390/processor.h Mon Feb 24 11:05:31 2003
+++ 2.5.63b/include/asm-s390/processor.h Mon Feb 24 18:19:06 2003
@@ -154,7 +154,7 @@
}
/*
- * Function to stop a processor until an interruption occured
+ * Function to stop a processor until an interruption occurred
*/
static inline void enabled_wait(void)
{
diff -ur 2.5.63a/include/asm-s390x/processor.h 2.5.63b/include/asm-s390x/processor.h
--- 2.5.63a/include/asm-s390x/processor.h Mon Feb 24 11:05:40 2003
+++ 2.5.63b/include/asm-s390x/processor.h Mon Feb 24 18:19:08 2003
@@ -168,7 +168,7 @@
}
/*
- * Function to stop a processor until an interruption occured
+ * Function to stop a processor until an interruption occurred
*/
static inline void enabled_wait(void)
{
diff -ur 2.5.63a/include/linux/sdla_x25.h 2.5.63b/include/linux/sdla_x25.h
--- 2.5.63a/include/linux/sdla_x25.h Mon Feb 24 11:05:32 2003
+++ 2.5.63b/include/linux/sdla_x25.h Mon Feb 24 18:19:11 2003
@@ -154,7 +154,7 @@
#define X25RES_INVAL_CALL_ARG 0x3A /* errorneous call arguments */
#define X25RES_INVAL_CALL_DATA 0x3B /* errorneous call user data */
#define X25RES_ASYNC_PACKET 0x40 /* asynchronous packet received */
-#define X25RES_PROTO_VIOLATION 0x41 /* protocol violation occured */
+#define X25RES_PROTO_VIOLATION 0x41 /* protocol violation occurred */
#define X25RES_PKT_TIMEOUT 0x42 /* X.25 packet time out */
#define X25RES_PKT_RETRY_LIMIT 0x43 /* X.25 packet retry limit exceeded */
/*----- Command-dependent results -----*/
diff -ur 2.5.63a/sound/pci/ali5451/ali5451.c 2.5.63b/sound/pci/ali5451/ali5451.c
--- 2.5.63a/sound/pci/ali5451/ali5451.c Mon Feb 24 11:05:44 2003
+++ 2.5.63b/sound/pci/ali5451/ali5451.c Mon Feb 24 18:19:13 2003
@@ -966,7 +966,7 @@
pchregs = &(codec->chregs);
- // check if interrupt occured for channel
+ // check if interrupt occurred for channel
old = pchregs->data.aint;
mask = ((unsigned int) 1L) << (channel & 0x1f);
diff -ur 2.5.63a/sound/pci/ens1370.c 2.5.63b/sound/pci/ens1370.c
--- 2.5.63a/sound/pci/ens1370.c Mon Feb 24 11:05:40 2003
+++ 2.5.63b/sound/pci/ens1370.c Mon Feb 24 18:19:18 2003
@@ -161,7 +161,7 @@
#define ES_1370_CSTAT (1<<10) /* CODEC is busy or register write in progress */
#define ES_1370_CBUSY (1<<9) /* CODEC is busy */
#define ES_1370_CWRIP (1<<8) /* CODEC register write in progress */
-#define ES_1371_SYNC_ERR (1<<8) /* CODEC synchronization error occured */
+#define ES_1371_SYNC_ERR (1<<8) /* CODEC synchronization error occurred */
#define ES_1371_VC(i) (((i)>>6)&0x03) /* voice code from CCB module */
#define ES_1370_VC(i) (((i)>>5)&0x03) /* voice code from CCB module */
#define ES_1371_MPWR (1<<5) /* power level interrupt pending */
@@ -172,8 +172,8 @@
#define ES_ADC (1<<0) /* ADC channel interrupt pending */
#define ES_REG_UART_DATA 0x08 /* R/W: UART data register */
#define ES_REG_UART_STATUS 0x09 /* R/O: UART status register */
-#define ES_RXINT (1<<7) /* RX interrupt occured */
-#define ES_TXINT (1<<2) /* TX interrupt occured */
+#define ES_RXINT (1<<7) /* RX interrupt occurred */
+#define ES_TXINT (1<<2) /* TX interrupt occurred */
#define ES_TXRDY (1<<1) /* transmitter ready */
#define ES_RXRDY (1<<0) /* receiver ready */
#define ES_REG_UART_CONTROL 0x09 /* W/O: UART control register */