Hi,
I left my computer unattended, when I got back, the BUG was
on screen. I was unable to start XFree86 after that, so this seems
serious ;). I found bug after 1 day and 2 hours of uptime (system
was left alone 4 earlier; XFree was not running).
1) output of ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux mother 2.5.64 #9 ?ro mar 5 14:03:36 CET 2003 i686 unknown
Gnu C 2.95.3
Gnu make 3.79.1
util-linux 2.11l
mount 2.11l
module-init-tools 0.9.10
e2fsprogs 1.32
jfsutils 1.1.1
reiserfsprogs 3.6.3
xfsprogs 2.0.3
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.9
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded jfs
2) Related to:
My wild guess (based on vtund process in oops-dump): bad interaction
of net and sysfs layer. (Is this possible?)
3). I don't know how to reproduce.
4). Enviromnent:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 368.277
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips : 720.89
Modules:
jfs 155464 1 - Live 0xc8942000
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
5000-500f : VIA Technologies, In VT82C686 [Apollo Sup
6000-607f : VIA Technologies, In VT82C686 [Apollo Sup
d000-d00f : VIA Technologies, In VT82C586/B/686A/B PI
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : VIA Technologies, In USB
d800-d81f : VIA Technologies, In USB (#2)
dc00-dcff : VIA Technologies, In VT82C686 AC97 Audio
e000-e003 : VIA Technologies, In VT82C686 AC97 Audio
e400-e403 : VIA Technologies, In VT82C686 AC97 Audio
e800-e8ff : Realtek Semiconducto RTL-8139/8139C/8139C
e800-e8ff : 8139too
ec00-ec3f : Ensoniq ES1370 [AudioPCI]
ec00-ec3f : Ensoniq AudioPCI
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-00361f26 : Kernel code
00361f27-00484243 : Kernel data
07ff0000-07ff2fff : ACPI Non-volatile Storage
07ff3000-07ffffff : ACPI Tables
e0000000-e3ffffff : VIA Technologies, In VT82C693A/694x [Apol
e4000000-e7ffffff : PCI Bus #01
e4000000-e4003fff : Matrox Graphics, Inc MGA G550 AGP
e5000000-e57fffff : Matrox Graphics, Inc MGA G550 AGP
e8000000-e9ffffff : PCI Bus #01
e8000000-e9ffffff : Matrox Graphics, Inc MGA G550 AGP
ea000000-ea0000ff : Realtek Semiconducto RTL-8139/8139C/8139C
ea000000-ea0000ff : 8139too
ffff0000-ffffffff : reserved
Full dmesg from system start, with BUG() output at the end:
Linux version 2.5.64 (zdzichu@mother) (gcc version 2.95.3 20010315 (release)) #9 ?ro mar 5 14:03:36 CET 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32752
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28656 pages, LIFO batch:6
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 VIA693 ) @ 0x000f70c0
ACPI: RSDT (v001 AWARD AWRDACPI 16944.11825) @ 0x07ff3000
ACPI: FADT (v001 AWARD AWRDACPI 16944.11825) @ 0x07ff3040
ACPI: DSDT (v001 VIA693 AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux2_5fb root=303 video=matrox:1024x768-16@75 root=/dev/ide/host0/bus0/target0/lun0/part3
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 368.178 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 720.89 BogoMIPS
Memory: 125148k/131008k available (2439k kernel code, 5328k reserved, 1160k data, 136k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Failed to register 'sysfs' in sysfs
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 368.0238 MHz.
..... host bus clock speed is 66.0952 MHz.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
mtrr: v2.0 (20020519)
PCI: PCI BIOS revision 2.10 entry at 0xfb2b0, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 242 entries (12 bytes)
biovec pool[1]: 4 bvecs: 242 entries (48 bytes)
biovec pool[2]: 16 bvecs: 242 entries (192 bytes)
biovec pool[3]: 64 bvecs: 242 entries (768 bytes)
biovec pool[4]: 128 bvecs: 121 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 60 entries (3072 bytes)
ACPI: Subsystem revision 20030228
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
block request queues:
128 requests per read queue
128 requests per write queue
8 requests per batch
enter congestion at 15
exit congestion at 17
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Enabling SEP on CPU 0
aio_setup: sizeof(struct page) = 40
Journalled Block Device driver loaded
Coda Kernel/Venus communications, v5.3.15, [email protected]
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
udf: registering filesystem
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
tts/1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(08)
parport0: assign_addrs: aa5500ff(08)
parport0: cpp_daisy: aa5500ff(08)
parport0: assign_addrs: aa5500ff(08)
parport_pc: Via 686A parallel port: io=0x378
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
Real Time Clock Driver v1.11
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized mga 3.1.0 20021029 on minor 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xc8829000, 00:06:4f:00:e8:99, IRQ 12
eth0: Identified 8139 chip type 'RTL-8139C'
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST38421A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: 8X4X32, ATAPI CD/DVD-ROM drive
hdd: ST32532A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: task_no_data_intr: error=0x04 { DriveStatusError }
hdd: 4995648 sectors (2558 MB) w/128KiB Cache, CHS=4956/16/63, UDMA(33)
/dev/ide/host0/bus1/target1/lun0: p1 p2
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208)
i2c-proc.o version 2.7.0 (20021208)
Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
#0: Ensoniq AudioPCI ENS1370 at 0xec00, irq 10
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_conntrack version 2.1 (1023 buckets, 8184 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
ACPI: (supports S0 S1 S4 S4bios S5)
UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session: CDROMMULTISESSION not supported: rc=-25
UDF-fs DEBUG fs/udf/super.c:1472:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:460:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1208:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:286:udf_read_tagged: location mismatch block 256, tag 18 != 256
UDF-fs DEBUG fs/udf/super.c:1262:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device ide0(3,3), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
reiserfs: replayed 29 transactions in 8 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
blk: queue c04d113c, I/O limit 4095Mb (mask 0xffffffff)
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04Aborted Command
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide1(22,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Disabled Privacy Extensions on device c04413a0(lo)
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Adding 251488k swap on /dev/ide/host0/bus1/target1/lun0/part2. Priority:1 extents:1
Adding 134756k swap on /swap. Priority:1 extents:3064
__ipv6_regen_rndid(): too short regeneration interval; timer diabled for eth0.
agpgart: Putting AGP V2 device at 00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 01:00.0 into 2x mode
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
tcpdump uses obsolete (PF_INET,SOCK_PACKET)
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
mtrr: MTRR 2 not used
mtrr: MTRR 2 not used
mtrr: MTRR 2 not used
------------[ cut here ]------------
kernel BUG at include/linux/dcache.h:266!
invalid operand: 0000
CPU: 0
EIP: 0060:[<c0167938>] Not tainted
EFLAGS: 00010246
EIP is at sysfs_remove_dir+0x18/0x116
eax: 00000000 ebx: c72dd9bc ecx: c72dd82c edx: 00000000
esi: c756af20 edi: c7fea560 ebp: c7720b40 esp: c7357f14
ds: 007b es: 007b ss: 0068
Process vtund (pid: 105, threadinfo=c7356000 task=c7a092e0)
Stack: c72dd9bc c72dd82c c7fea560 c7720b40 c72dd82c c0217af7 c72dd9bc c72dd9bc
c0217b0f c72dd9bc c72dd82c c02e5205 c72dd9bc c72dd82c c72dd800 c7fea560
c7720b40 c72dd9bc c02819d8 c72dd82c c72dd82c c5162660 c771f8a0 c0142864
Call Trace:
[<c0217af7>] kobject_del+0xb/0x18
[<c0217b0f>] kobject_unregister+0xb/0x18
[<c02e5205>] unregister_netdevice+0x20d/0x230
[<c02819d8>] tun_chr_close+0x9c/0xb0
[<c0142864>] __fput+0x30/0xc4
[<c0142833>] fput+0x13/0x14
[<c0141615>] filp_close+0x59/0x64
[<c0141667>] sys_close+0x47/0x58
[<c0108c9b>] syscall_call+0x7/0xb
Code: 0f 0b 0a 01 20 4c 37 c0 ff 06 80 4e 04 08 85 f6 0f 84 e2 00
My gzipped .config attached.
I hope this will help o squash the bug. I can do further testing
on this system, if asked.
--
Tomasz Torcz RIP is irrevelant. Spoofing is futile.
[email protected] Your routes will be aggreggated.
Look for akpm's latest -mm tree release notes - the patch is embedded
in there.
M.
--On Thursday, March 06, 2003 20:20:50 +0100 "Tomasz Torcz, BG" <[email protected]> wrote:
> Hi,
>
> I left my computer unattended, when I got back, the BUG was
> on screen. I was unable to start XFree86 after that, so this seems
> serious ;). I found bug after 1 day and 2 hours of uptime (system
> was left alone 4 earlier; XFree was not running).
>
> 1) output of ver_linux
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux mother 2.5.64 #9 ?ro mar 5 14:03:36 CET 2003 i686 unknown
>
> Gnu C 2.95.3
> Gnu make 3.79.1
> util-linux 2.11l
> mount 2.11l
> module-init-tools 0.9.10
> e2fsprogs 1.32
> jfsutils 1.1.1
> reiserfsprogs 3.6.3
> xfsprogs 2.0.3
> Linux C Library 2.2.5
> Dynamic linker (ldd) 2.2.5
> Procps 2.0.9
> Net-tools 1.60
> Kbd 1.06
> Sh-utils 2.0
> Modules Loaded jfs
>
> 2) Related to:
>
> My wild guess (based on vtund process in oops-dump): bad interaction
> of net and sysfs layer. (Is this possible?)
>
> 3). I don't know how to reproduce.
>
> 4). Enviromnent:
>
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 6
> model name : Celeron (Mendocino)
> stepping : 5
> cpu MHz : 368.277
> cache size : 128 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 mmx fxsr
> bogomips : 720.89
>
> Modules:
> jfs 155464 1 - Live 0xc8942000
>
>
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial
> 0376-0376 : ide1
> 0378-037a : parport0
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial
> 0cf8-0cff : PCI conf1
> 5000-500f : VIA Technologies, In VT82C686 [Apollo Sup
> 6000-607f : VIA Technologies, In VT82C686 [Apollo Sup
> d000-d00f : VIA Technologies, In VT82C586/B/686A/B PI
> d000-d007 : ide0
> d008-d00f : ide1
> d400-d41f : VIA Technologies, In USB
> d800-d81f : VIA Technologies, In USB (#2)
> dc00-dcff : VIA Technologies, In VT82C686 AC97 Audio
> e000-e003 : VIA Technologies, In VT82C686 AC97 Audio
> e400-e403 : VIA Technologies, In VT82C686 AC97 Audio
> e800-e8ff : Realtek Semiconducto RTL-8139/8139C/8139C
> e800-e8ff : 8139too
> ec00-ec3f : Ensoniq ES1370 [AudioPCI]
> ec00-ec3f : Ensoniq AudioPCI
>
> 00000000-0009ffff : System RAM
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-07feffff : System RAM
> 00100000-00361f26 : Kernel code
> 00361f27-00484243 : Kernel data
> 07ff0000-07ff2fff : ACPI Non-volatile Storage
> 07ff3000-07ffffff : ACPI Tables
> e0000000-e3ffffff : VIA Technologies, In VT82C693A/694x [Apol
> e4000000-e7ffffff : PCI Bus #01
> e4000000-e4003fff : Matrox Graphics, Inc MGA G550 AGP
> e5000000-e57fffff : Matrox Graphics, Inc MGA G550 AGP
> e8000000-e9ffffff : PCI Bus #01
> e8000000-e9ffffff : Matrox Graphics, Inc MGA G550 AGP
> ea000000-ea0000ff : Realtek Semiconducto RTL-8139/8139C/8139C
> ea000000-ea0000ff : 8139too
> ffff0000-ffffffff : reserved
>
> Full dmesg from system start, with BUG() output at the end:
>
>
> Linux version 2.5.64 (zdzichu@mother) (gcc version 2.95.3 20010315 (release)) #9 ?ro mar 5 14:03:36 CET 2003
> Video mode to be used for restore is f00
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
> BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
> BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 127MB LOWMEM available.
> On node 0 totalpages: 32752
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 28656 pages, LIFO batch:6
> HighMem zone: 0 pages, LIFO batch:1
> ACPI: RSDP (v000 VIA693 ) @ 0x000f70c0
> ACPI: RSDT (v001 AWARD AWRDACPI 16944.11825) @ 0x07ff3000
> ACPI: FADT (v001 AWARD AWRDACPI 16944.11825) @ 0x07ff3040
> ACPI: DSDT (v001 VIA693 AWRDACPI 00000.04096) @ 0x00000000
> ACPI: BIOS passes blacklist
> ACPI: MADT not present
> Building zonelist for node : 0
> Kernel command line: auto BOOT_IMAGE=linux2_5fb root=303 video=matrox:1024x768-16@75 root=/dev/ide/host0/bus0/target0/lun0/part3
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> PID hash table entries: 512 (order 9: 4096 bytes)
> Detected 368.178 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 720.89 BogoMIPS
> Memory: 125148k/131008k available (2439k kernel code, 5328k reserved, 1160k data, 136k init, 0k highmem)
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> Failed to register 'sysfs' in sysfs
> -> /dev
> -> /dev/console
> -> /root
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 128K
> CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel Celeron (Mendocino) stepping 05
> Enabling fast FPU save and restore... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 368.0238 MHz.
> ..... host bus clock speed is 66.0952 MHz.
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> mtrr: v2.0 (20020519)
> PCI: PCI BIOS revision 2.10 entry at 0xfb2b0, last bus=1
> PCI: Using configuration type 1
> BIO: pool of 256 setup, 14Kb (56 bytes/bio)
> biovec pool[0]: 1 bvecs: 242 entries (12 bytes)
> biovec pool[1]: 4 bvecs: 242 entries (48 bytes)
> biovec pool[2]: 16 bvecs: 242 entries (192 bytes)
> biovec pool[3]: 64 bvecs: 242 entries (768 bytes)
> biovec pool[4]: 128 bvecs: 121 entries (1536 bytes)
> biovec pool[5]: 256 bvecs: 60 entries (3072 bytes)
> ACPI: Subsystem revision 20030228
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
> block request queues:
> 128 requests per read queue
> 128 requests per write queue
> 8 requests per batch
> enter congestion at 15
> exit congestion at 17
> PCI: Using ACPI for IRQ routing
> PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
> Enabling SEP on CPU 0
> aio_setup: sizeof(struct page) = 40
> Journalled Block Device driver loaded
> Coda Kernel/Venus communications, v5.3.15, [email protected]
> devfs: v1.22 (20021013) Richard Gooch ([email protected])
> devfs: boot_options: 0x1
> udf: registering filesystem
> Initializing Cryptographic API
> PCI: Disabling Via external APIC routing
> ACPI: Power Button (FF) [PWRF]
> ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
> Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
> tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
> tts/1 at I/O 0x2f8 (irq = 3) is a 16550A
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport0: cpp_daisy: aa5500ff(08)
> parport0: assign_addrs: aa5500ff(08)
> parport0: cpp_daisy: aa5500ff(08)
> parport0: assign_addrs: aa5500ff(08)
> parport_pc: Via 686A parallel port: io=0x378
> pty: 256 Unix98 ptys configured
> lp0: using parport0 (polling).
> Real Time Clock Driver v1.11
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected VIA Apollo Pro 133 chipset
> agpgart: Maximum main memory to use for agp memory: 94M
> agpgart: AGP aperture is 64M @ 0xe0000000
> [drm] Initialized mga 3.1.0 20021029 on minor 0
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> loop: loaded (max 8 devices)
> 8139too Fast Ethernet driver 0.9.26
> eth0: RealTek RTL8139 Fast Ethernet at 0xc8829000, 00:06:4f:00:e8:99, IRQ 12
> eth0: Identified 8139 chip type 'RTL-8139C'
> Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 00:07.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:07.1
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: ST38421A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: 8X4X32, ATAPI CD/DVD-ROM drive
> hdd: ST32532A, ATA DISK drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: host protected area => 1
> hda: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63, UDMA(66)
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
> hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: task_no_data_intr: error=0x04 { DriveStatusError }
> hdd: 4995648 sectors (2558 MB) w/128KiB Cache, CHS=4956/16/63, UDMA(33)
> /dev/ide/host0/bus1/target1/lun0: p1 p2
> hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.12
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: AT Set 2 keyboard on isa0060/serio0
> serio: i8042 KBD port at 0x60,0x64 irq 1
> i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208)
> i2c-proc.o version 2.7.0 (20021208)
> Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 2003 UTC).
> request_module: failed /sbin/modprobe -- snd-card-0. error = -16
> ALSA device list:
> #0: Ensoniq AudioPCI ENS1370 at 0xec00, irq 10
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 8192 bind 8192)
> IPv4 over IPv4 tunneling driver
> GRE over IPv4 tunneling driver
> ip_conntrack version 2.1 (1023 buckets, 8184 max) - 304 bytes per conntrack
> ip_tables: (C) 2000-2002 Netfilter core team
> Initializing IPsec netlink socket
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> IPv6 v0.8 for NET4.0
> IPv6 over IPv4 tunneling driver
> NET4: Ethernet Bridge 008 for NET4.0
> Bridge firewalling registered
> ACPI: (supports S0 S1 S4 S4bios S5)
> UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session: CDROMMULTISESSION not supported: rc=-25
> UDF-fs DEBUG fs/udf/super.c:1472:udf_fill_super: Multi-session=0
> UDF-fs DEBUG fs/udf/super.c:460:udf_vrs: Starting at sector 16 (2048 byte sectors)
> UDF-fs DEBUG fs/udf/super.c:1208:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
> UDF-fs DEBUG fs/udf/misc.c:286:udf_read_tagged: location mismatch block 256, tag 18 != 256
> UDF-fs DEBUG fs/udf/super.c:1262:udf_load_partition: No Anchor block found
> UDF-fs: No partition found (1)
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device ide0(3,3), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
> reiserfs: replayed 29 transactions in 8 seconds
> Using r5 hash to sort names
> VFS: Mounted root (reiserfs filesystem) readonly.
> Mounted devfs on /dev
> Freeing unused kernel memory: 136k freed
> blk: queue c04d113c, I/O limit 4095Mb (mask 0xffffffff)
> hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
> hdc: drive_cmd: error=0x04Aborted Command
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide1(22,65), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Disabled Privacy Extensions on device c04413a0(lo)
> eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> Adding 251488k swap on /dev/ide/host0/bus1/target1/lun0/part2. Priority:1 extents:1
> Adding 134756k swap on /swap. Priority:1 extents:3064
> __ipv6_regen_rndid(): too short regeneration interval; timer diabled for eth0.
> agpgart: Putting AGP V2 device at 00:00.0 into 2x mode
> agpgart: Putting AGP V2 device at 01:00.0 into 2x mode
> ISO 9660 Extensions: Microsoft Joliet Level 3
> ISO 9660 Extensions: RRIP_1991A
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> tcpdump uses obsolete (PF_INET,SOCK_PACKET)
> eth0: Promiscuous mode enabled.
> device eth0 entered promiscuous mode
> device eth0 left promiscuous mode
> eth0: Promiscuous mode enabled.
> device eth0 entered promiscuous mode
> device eth0 left promiscuous mode
> jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
> jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
> jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
> jfs: version magic '2.5.63 PENTIUMII gcc-2.95' should be '2.5.64 PENTIUMII gcc-2.95'
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> mtrr: MTRR 2 not used
> mtrr: MTRR 2 not used
> mtrr: MTRR 2 not used
> ------------[ cut here ]------------
> kernel BUG at include/linux/dcache.h:266!
> invalid operand: 0000
> CPU: 0
> EIP: 0060:[<c0167938>] Not tainted
> EFLAGS: 00010246
> EIP is at sysfs_remove_dir+0x18/0x116
> eax: 00000000 ebx: c72dd9bc ecx: c72dd82c edx: 00000000
> esi: c756af20 edi: c7fea560 ebp: c7720b40 esp: c7357f14
> ds: 007b es: 007b ss: 0068
> Process vtund (pid: 105, threadinfo=c7356000 task=c7a092e0)
> Stack: c72dd9bc c72dd82c c7fea560 c7720b40 c72dd82c c0217af7 c72dd9bc c72dd9bc
> c0217b0f c72dd9bc c72dd82c c02e5205 c72dd9bc c72dd82c c72dd800 c7fea560
> c7720b40 c72dd9bc c02819d8 c72dd82c c72dd82c c5162660 c771f8a0 c0142864
> Call Trace:
> [<c0217af7>] kobject_del+0xb/0x18
> [<c0217b0f>] kobject_unregister+0xb/0x18
> [<c02e5205>] unregister_netdevice+0x20d/0x230
> [<c02819d8>] tun_chr_close+0x9c/0xb0
> [<c0142864>] __fput+0x30/0xc4
> [<c0142833>] fput+0x13/0x14
> [<c0141615>] filp_close+0x59/0x64
> [<c0141667>] sys_close+0x47/0x58
> [<c0108c9b>] syscall_call+0x7/0xb
>
> Code: 0f 0b 0a 01 20 4c 37 c0 ff 06 80 4e 04 08 85 f6 0f 84 e2 00
>
> My gzipped .config attached.
>
>
> I hope this will help o squash the bug. I can do further testing
> on this system, if asked.
>
> --
> Tomasz Torcz RIP is irrevelant. Spoofing is futile.
> [email protected] Your routes will be aggreggated.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
On Sun, Mar 09, 2003 at 08:07:32PM +0200, Craig Schlenter wrote:
> On Sun, Mar 09, 2003 at 09:45:30AM -0800, Martin J. Bligh wrote:
> > Look for akpm's latest -mm tree release notes - the patch is embedded
> > in there.
>
> [I posted a similar oops in another thread]
>
> Dang! I glossed over that as the comment mentioned SMP and PREEMPT
> and I'm running on uniprocessor. Thanks for the pointer. Will try
> it out shortly ...
Replying to myself :)
The patch was already part of my tree as I had grabbed the latest
bk stuff from v2.5/testing/cset which means my oops is still unresolved.
I see there is a another oops that looks very much that same that
was posted by CaT <[email protected]> .. CC'ed in case the above notes
help.
Cheers,
--Craig
On Sun, 9 Mar 2003, Martin J. Bligh wrote:
> Look for akpm's latest -mm tree release notes - the patch is embedded
> in there.
Actually, sysfs is officially fscked in 2.5.64. I'm looking into it, so
more reports of it crashing are not necessary. :) I apologize for the
inconveniences this has caused.
-pat
On Sun, 9 Mar 2003, Patrick Mochel wrote:
>
> On Sun, 9 Mar 2003, Martin J. Bligh wrote:
>
> > Look for akpm's latest -mm tree release notes - the patch is embedded
> > in there.
>
> Actually, sysfs is officially fscked in 2.5.64. I'm looking into it, so
> more reports of it crashing are not necessary. :) I apologize for the
> inconveniences this has caused.
I was able to reproduce the Oops with a USB device on multiple insert/
removals. The patch below fixes the Oops for me. Could people who have
seen the Oops try it out and let me know if it helps them?
[ Unfortunately, I can't test some of the exact failure scenarios, as I
don't use ppp, and my one system with PCMCIA has decided that it doesn't
want to let me (physically) insert cards anymore.. ]
Thanks,
-pat
===== fs/sysfs/dir.c 1.4 vs edited =====
--- 1.4/fs/sysfs/dir.c Sat Mar 8 23:42:32 2003
+++ edited/fs/sysfs/dir.c Sun Mar 9 14:25:26 2003
@@ -98,7 +98,6 @@
* Unlink and unhash.
*/
spin_unlock(&dcache_lock);
- d_delete(d);
simple_unlink(dentry->d_inode,d);
dput(d);
spin_lock(&dcache_lock);
===== fs/sysfs/inode.c 1.83 vs edited =====
--- 1.83/fs/sysfs/inode.c Mon Mar 3 17:11:29 2003
+++ edited/fs/sysfs/inode.c Sun Mar 9 14:25:45 2003
@@ -93,19 +93,14 @@
/* make sure dentry is really there */
if (victim->d_inode &&
(victim->d_parent->d_inode == dir->d_inode)) {
- simple_unlink(dir->d_inode,victim);
- d_delete(victim);
-
pr_debug("sysfs: Removing %s (%d)\n", victim->d_name.name,
atomic_read(&victim->d_count));
- /*
- * Drop reference from initial sysfs_get_dentry().
- */
- dput(victim);
+
+ simple_unlink(dir->d_inode,victim);
+
}
-
- /**
- * Drop the reference acquired from sysfs_get_dentry() above.
+ /*
+ * Drop reference from sysfs_get_dentry() above.
*/
dput(victim);
}
On Sun, 2003-03-09 at 12:31, Patrick Mochel wrote:
> I was able to reproduce the Oops with a USB device on multiple insert/
> removals. The patch below fixes the Oops for me. Could people who have
> seen the Oops try it out and let me know if it helps them?
>
> [ Unfortunately, I can't test some of the exact failure scenarios, as I
> don't use ppp, and my one system with PCMCIA has decided that it doesn't
> want to let me (physically) insert cards anymore.. ]
I'm still getting a crash with this patch+mm4. I got this on ethernet
card removal:
------------[ cut here ]------------
kernel BUG at include/linux/dcache.h:266!
invalid operand: 0000
CPU: 0
EIP: 0060:[<c017a219>] Not tainted
EFLAGS: 00010246
EIP is at sysfs_remove_dir+0x19/0x178
eax: 00000000 ebx: cb384190 ecx: 00000000 edx: 00000000
esi: c11f0000 edi: c92105e4 ebp: c11f1e00 esp: c11f1dec
ds: 007b es: 007b ss: 0068
Process events/0 (pid: 3, threadinfo=c11f0000 task=c11f4c80)
Stack: c11f1e0c c0127205 cb384190 c11f0000 cb384000 c11f1e10 c01c11ed cb384190
cb384190 c11f1e20 c01c120d cb384190 00000001 c11f1e4c c022e4de cb384190
00000202 c02c7014 c11f1e5c c9210288 c11f1e50 cb384000 cb384000 cbda944c
Call Trace:
[<c0127205>] notifier_call_chain+0x25/0x50
[<c01c11ed>] kobject_del+0xd/0x20
[<c01c120d>] kobject_unregister+0xd/0x20
[<c022e4de>] unregister_netdevice+0x26e/0x290
[<c01f6af2>] unregister_netdev+0x12/0x20
[<cc88cbf2>] tulip_remove_one+0x42/0x80 [tulip]
[<cc893768>] tulip_driver+0x28/0xa0 [tulip]
[<c01c59ab>] pci_device_remove+0x1b/0x30
[<c01ce096>] device_release_driver+0x46/0x60
[<c01ce1fb>] bus_remove_device+0x5b/0xb0
[<c01cd5fa>] device_del+0x6a/0xa0
[<c01cd63d>] device_unregister+0xd/0x1c
[<c01c616e>] pci_remove_bus_device+0x3e/0x80
[<c01c61d9>] pci_remove_behind_bridge+0x29/0x40
[<c0219a8f>] cb_free+0x1f/0x50
[<c0216b01>] shutdown_socket+0x71/0xe0
[<c0216eae>] parse_events+0x3e/0xf0
[<c021bd9c>] yenta_bh+0x3c/0x50
[<c012997d>] worker_thread+0x1bd/0x2a0
[<c021bd60>] yenta_bh+0x0/0x50
[<c0118f00>] default_wake_function+0x0/0x20
[<c0108f56>] ret_from_fork+0x6/0x14
[<c0118f00>] default_wake_function+0x0/0x20
[<c01297c0>] worker_thread+0x0/0x2a0
[<c01072c5>] kernel_thread_helper+0x5/0x10
Code: 0f 0b 0a 01 68 86 28 c0 ff 07 83 4f 04 08 89 7d f0 85 ff 0f
J
On 9 Mar 2003, Jeremy Fitzhardinge wrote:
> On Sun, 2003-03-09 at 12:31, Patrick Mochel wrote:
> > I was able to reproduce the Oops with a USB device on multiple insert/
> > removals. The patch below fixes the Oops for me. Could people who have
> > seen the Oops try it out and let me know if it helps them?
> >
> > [ Unfortunately, I can't test some of the exact failure scenarios, as I
> > don't use ppp, and my one system with PCMCIA has decided that it doesn't
> > want to let me (physically) insert cards anymore.. ]
>
> I'm still getting a crash with this patch+mm4. I got this on ethernet
> card removal:
Bah, we're accidentally dropping the refcount on the directory one too
many times, which is a different, though slightly related, problem to the
one the previous patch fixed.
Please try this patch (after removing the previous one). Thanks,
-pat
===== fs/sysfs/dir.c 1.4 vs edited =====
--- 1.4/fs/sysfs/dir.c Sat Mar 8 23:42:32 2003
+++ edited/fs/sysfs/dir.c Sun Mar 9 16:01:45 2003
@@ -98,7 +98,6 @@
* Unlink and unhash.
*/
spin_unlock(&dcache_lock);
- d_delete(d);
simple_unlink(dentry->d_inode,d);
dput(d);
spin_lock(&dcache_lock);
@@ -108,16 +107,11 @@
}
spin_unlock(&dcache_lock);
up(&dentry->d_inode->i_sem);
- d_invalidate(dentry);
- simple_rmdir(parent->d_inode,dentry);
d_delete(dentry);
+ simple_rmdir(parent->d_inode,dentry);
pr_debug(" o %s removing done (%d)\n",dentry->d_name.name,
atomic_read(&dentry->d_count));
- /**
- * Drop reference from initial sysfs_get_dentry().
- */
- dput(dentry);
/**
* Drop reference from dget() on entrance.
===== fs/sysfs/inode.c 1.83 vs edited =====
--- 1.83/fs/sysfs/inode.c Mon Mar 3 17:11:29 2003
+++ edited/fs/sysfs/inode.c Sun Mar 9 14:25:45 2003
@@ -93,19 +93,14 @@
/* make sure dentry is really there */
if (victim->d_inode &&
(victim->d_parent->d_inode == dir->d_inode)) {
- simple_unlink(dir->d_inode,victim);
- d_delete(victim);
-
pr_debug("sysfs: Removing %s (%d)\n", victim->d_name.name,
atomic_read(&victim->d_count));
- /*
- * Drop reference from initial sysfs_get_dentry().
- */
- dput(victim);
+
+ simple_unlink(dir->d_inode,victim);
+
}
-
- /**
- * Drop the reference acquired from sysfs_get_dentry() above.
+ /*
+ * Drop reference from sysfs_get_dentry() above.
*/
dput(victim);
}
On Sun, 2003-03-09 at 14:06, Patrick Mochel wrote:
> Bah, we're accidentally dropping the refcount on the directory one too
> many times, which is a different, though slightly related, problem to the
> one the previous patch fixed.
>
> Please try this patch (after removing the previous one).
That looks like it fixed it.
J
On Sun, Mar 09, 2003 at 03:14:34PM -0800, Jeremy Fitzhardinge wrote:
> On Sun, 2003-03-09 at 14:06, Patrick Mochel wrote:
> > Bah, we're accidentally dropping the refcount on the directory one too
> > many times, which is a different, though slightly related, problem to the
> > one the previous patch fixed.
> >
> > Please try this patch (after removing the previous one).
>
> That looks like it fixed it.
I've been unable to reproduce my sysfs/ppp BUG with this
patch applied. Magic.
Thank you!
--Craig
On Sun, Mar 09, 2003 at 04:06:24PM -0600, Patrick Mochel wrote:
>
> On 9 Mar 2003, Jeremy Fitzhardinge wrote:
>
> > On Sun, 2003-03-09 at 12:31, Patrick Mochel wrote:
> > > I was able to reproduce the Oops with a USB device on multiple insert/
> > > removals. The patch below fixes the Oops for me. Could people who have
> > > seen the Oops try it out and let me know if it helps them?
> > >
> > > [ Unfortunately, I can't test some of the exact failure scenarios, as I
> > > don't use ppp, and my one system with PCMCIA has decided that it doesn't
> > > want to let me (physically) insert cards anymore.. ]
> >
> > I'm still getting a crash with this patch+mm4. I got this on ethernet
> > card removal:
>
> Bah, we're accidentally dropping the refcount on the directory one too
> many times, which is a different, though slightly related, problem to the
> one the previous patch fixed.
>
> Please try this patch (after removing the previous one). Thanks,
I wanted to give this a go but it does not apply vs my 2.5.64. None of
the patches I've applied to it touch that file so I'm guessing I'm
missing something else.
What am I missing and/or is it possible to get this vs 2.5.64? I tried
hand adding it in but didn't due to the files being rather different.
--
"Other countries of course, bear the same risk. But there's no doubt his
hatred is mainly directed at us. After all this is the guy who tried to
kill my dad."
- George W. Bush Jr, 'President' of the United States
September 26, 2002 (from a political fundraiser in Huston, Texas)
On Thu, 13 Mar 2003, CaT wrote:
> On Sun, Mar 09, 2003 at 04:06:24PM -0600, Patrick Mochel wrote:
> >
> > On 9 Mar 2003, Jeremy Fitzhardinge wrote:
> >
> > > On Sun, 2003-03-09 at 12:31, Patrick Mochel wrote:
> > > > I was able to reproduce the Oops with a USB device on multiple insert/
> > > > removals. The patch below fixes the Oops for me. Could people who have
> > > > seen the Oops try it out and let me know if it helps them?
> > > >
> > > > [ Unfortunately, I can't test some of the exact failure scenarios, as I
> > > > don't use ppp, and my one system with PCMCIA has decided that it doesn't
> > > > want to let me (physically) insert cards anymore.. ]
> > >
> > > I'm still getting a crash with this patch+mm4. I got this on ethernet
> > > card removal:
> >
> > Bah, we're accidentally dropping the refcount on the directory one too
> > many times, which is a different, though slightly related, problem to the
> > one the previous patch fixed.
> >
> > Please try this patch (after removing the previous one). Thanks,
>
> I wanted to give this a go but it does not apply vs my 2.5.64. None of
> the patches I've applied to it touch that file so I'm guessing I'm
> missing something else.
>
> What am I missing and/or is it possible to get this vs 2.5.64? I tried
> hand adding it in but didn't due to the files being rather different.
Sorry, the patches were relative to the latest BK tree, as well as the
latest BK snapshot from kernel.org.
The fix has been integrated into Linus's tree, so by getting the latest
snapshot, things should be fixed for you.
-pat