Hi,
While looking for support on the [email protected] list, someone
recommended that I ask here.
Here's the deal...
After forgetting my root password and trying to boot into single user mode
under Red Hat 7.2 Pro (boxed retail set) I have run into a kernel panic. In
grub I edited the boot commands to include "kernel /boot/.... single".
Immediately after doing this the system failed to boot with the error
message "kernel panic: no init found. Try passing init= to kernel".
(Previously the machine had run just fine and had been up for over 150
days). After the first failure I tried adding any combination of "single",
"-single", "s", and "-s" I could think of, and changed their position in the
command (first/last parameter, appended "single" to other commands including
initrd line). Nothing could get me into single user mode, I never got past
the kernel panic. I also tried passing init= as a kernel argument with the
path listed on the "initrd" command. I eventually booted to rescue mode from
a RH 7.2 install disk and got my password changed. However, I am still
unable to boot from the hard drives. (In a software RAID 1 config)
My grub.conf file contains the following:
root (hd0,0)
kernel /boot/vmlinuz-2.4.7-10 ro root=/dev/sda1
initrd /boot/initrd-2.4.7-10.img
( I set the file back to exactly how it looked when I started, any changes I
made were always lost after having to reboot)
Also of interest is an error that occurred just before the kernel panic. It
read "pivotroot: pivot_root(/sysroot, /sysroot/initd) failed:2". Does anyone
know what the "2" error code indicates? I cannot find this anywhere in any
documentation of pivot_root. It seems to be a rather obscure function in the
first place. Maybe if someone could shed some light on this?
The machine in question is a single CPU (Intel PIII 800mhz) with 2 SCSI
drives in RAID 1 (mirroring). I'm guessing from the 'kernel' line that my
kernel version is "vmlinuz-2.4.7-10". It is the one that came with RH 7.2
Pro retail box. I haven't upgraded or modified anything.
I'm not entirely sure of my file system layout. (I'm a relative newbie,
unsure about devices and file systems still) I'm using RAID 1 on two SCSI
drives. It was setup by the installer during the install process and I
assume it uses all the defaults. I don't know the layout of fstab. The
machine is remote (co-located in a data center), and I have no way of
copying/pasting or saving that information from the server.
I also took a look in /var/log/boot and all the recent files were blank.
Nothing ever got written to them.
>From research I have done online, I have found other posts mentioning this
exact problem. However, none of them have any solutions. It was suggested
that this may be due to file system corruption. I doubt this is the case as
I can mount my software RAID 1 drives from rescue mode and read/write all
the files just fine. Everything seems to be intact. I have not run fsck but
I will do that ASAP.
I have gotten my hands on the latest RH 8.0 ISOs. Could upgrading from 7.2
to 8.0 cure my woes? Would this just preserve the hardware/device
misconfiguration?
My problem looks to described in more detail in this post:
https://listman.redhat.com/pipermail/valhalla-list/2003-January/thread.html#
23350
and here: http://lists.ethernal.org/cantlug-0208/msg00472.html
and here:
http://archive.linuxfromscratch.org/mail-archives/lfs-support/2003/02/0018.h
tml
and here: http://www.gollatz.net/troubleshooting
Any help or ideas would be greatly appreciated.
Regards,
Jeremy
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeremy Booker - Owner / Webmaster
JTech Web Systems
http://www.JTechWebSystems.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Therefore do not worry about tomorrow, for tomorrow will worry about
itself. Each day has enough trouble of its own." -Mathew 5:34
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Wednesday 12 March 2003 23:54, Jeremy Booker wrote:
> kernel /boot/vmlinuz-2.4.7-10 ro root=/dev/sda1
append to that line "init=/bin/bash" then boot. You will see a bash prompt.
Now mount whatever is necessary, change your passwd and reboot. Maybe, you
need a "mount -o remount,rw /" prior to changing pw.
Torsten
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQE+cDNZwicyCTir8T4RAoNmAKCR2BQI0NulQ8vNebNJGHKYu2xuPwCcDiCu
HMkno8ozAKjKk8Xll/WRqBM=
=puKa
-----END PGP SIGNATURE-----
On Thursday 13 March 2003 08:29, Torsten Foertsch wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Wednesday 12 March 2003 23:54, Jeremy Booker wrote:
> > kernel /boot/vmlinuz-2.4.7-10 ro root=/dev/sda1
>
> append to that line "init=/bin/bash" then boot. You will see a bash prompt.
> Now mount whatever is necessary, change your passwd and reboot. Maybe, you
> need a "mount -o remount,rw /" prior to changing pw.
>
And before rebooting you should also run "sync" ;-) otherwise everything you
have written to the harddisk (including your password file) would be probably
lost.
Bernd