Hello,
I have already reported this "bug" for an older kernel:
Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-500A '
Revision : '1.0f'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 8126464 = 7936 KB
FIFO size : 67108864 = 65536 KB
Track 01: data 4129 MB
Total size: 4129 MB = 2114048 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 184448
Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds. 0.24% done, estimate finish Fri Mar 21 19:09:11 2003
8 seconds. 0.47% done, estimate finish Fri Mar 21 19:12:42 2003
7 seconds. 0.71% done, estimate finish Fri Mar 21 19:13:52 2003
0.95% done, estimate finish Fri Mar 21 19:14:27 2003
6 seconds. 1.18% done, estimate finish Fri Mar 21 19:13:24 2003
5 seconds. 1.42% done, estimate finish Fri Mar 21 19:13:52 2003
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 4 of 4129 MB written (fifo 97%) 16.3x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 08 B8 00 00 1F 00
status: 0x1 (GOOD STATUS)
resid: 63488
cmd finished after 0.010s timeout 100s
write track data: error after 4571136 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing time: 5.371s
Average write speed 585.1x.
Fixating...
Fixating time: 77.468s
cdrecord-prodvd: fifo had 1095 puts and 73 gets.
cdrecord-prodvd: fifo was 0 times empty and 1 times full, min fill was 96%.
The command that give me that was:
mkisofs -dvd-video -V $1 $2 | cdrecord-prodvd driveropts=burnfree -dummy -v dev=/dev/hdc fs=64m speed=1 tsize={$SIZE}s -
Thank you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
On Fri, Mar 21 2003, Gregoire Favre wrote:
> Hello,
>
> I have already reported this "bug" for an older kernel:
Yeah it's being worked on, but the bug hasn't been found yet.
Unfortunately, I cannot reproduce yet. I do need to put a 2nd test
machine back into the game, it's more reliable for debugging hard hangs.
--
Jens Axboe
On Fri, Mar 21, 2003 at 09:10:24PM +0100, Jens Axboe wrote:
> Yeah it's being worked on, but the bug hasn't been found yet.
> Unfortunately, I cannot reproduce yet. I do need to put a 2nd test
> machine back into the game, it's more reliable for debugging hard hangs.
Great ;-)
In case I could do something just let me know!!!
Thank you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
>Old-Return-Path: <[email protected]>
>I have already reported this "bug" for an older kernel:
>Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
>Unlocked features: ProDVD Clone
>Limited features: speed
>This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
>TOC Type: 1 = CD-ROM
>scsidev: '/dev/hdc'
>devname: '/dev/hdc'
>scsibus: -2 target: -2 lun: -2
>Warning: Open by 'devname' is unintentional and not supported.
>Linux sg driver version: 3.5.27
>Using libscg version 'schily-0.7'
>Driveropts: 'burnfree'
>atapi: 1
>Device type : Removable CD-ROM
>Version : 2
>Response Format: 2
>Capabilities :
>Vendor_info : 'SONY '
>Identifikation : 'DVD RW DRU-500A '
>Revision : '1.0f'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags : DVD SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 8126464 = 7936 KB
>FIFO size : 67108864 = 65536 KB
>Track 01: data 4129 MB
>Total size: 4129 MB = 2114048 sectors
>Current Secsize: 2048
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 184448
>Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
>Last chance to quit, starting dummy write in 9 seconds. 0.24% done, estimate finish Fri Mar 21 19:09:11 2003
> 8 seconds. 0.47% done, estimate finish Fri Mar 21 19:12:42 2003
> 7 seconds. 0.71% done, estimate finish Fri Mar 21 19:13:52 2003
> 0.95% done, estimate finish Fri Mar 21 19:14:27 2003
> 6 seconds. 1.18% done, estimate finish Fri Mar 21 19:13:24 2003
> 5 seconds. 1.42% done, estimate finish Fri Mar 21 19:13:52 2003
> 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>BURN-Free is ON.
>Starting new track at sector: 0
>Track 01: 4 of 4129 MB written (fifo 97%) 16.3x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 08 B8 00 00 1F 00
>status: 0x1 (GOOD STATUS)
^^^^
Until somebody reinserted this bug, the Linux Status bug should have
been fixed IIRC about previous mails in this list.
J?rg
EMail:[email protected] (home) J?rg Schilling D-13353 Berlin
[email protected] (uni) If you don't have iso-8859-1
[email protected] (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily