2003-03-23 06:22:01

by Osamu Tomita

[permalink] [raw]
Subject: [PATCH 2.5.65-ac3] Updates for PC-9800 related (0/5) summary

Thanks for merging.
These are the update patch for NEC PC-9800 subarchitecture related files
against 2.5.65-ac3. Please apply.

Description:
o alsa-update.patch (1/5)
Update sound/core/Makefile. Restore missing target for PC-98.

o boot98-update.patch (2/5)
Update arch/i386/Makefile and arch/i386/boot98/*.

o floppy98-update.patch (3/5)
Update PC98 standard floppy driver.

o network_card-update.patch (4/5)
Update drivers/net/Kconfig. Remove duplicated entry for PC-98.

o video_card-update.patch (5/5)
Add missing files for PC98 Standard text mode video driver.

Regards,
Osamu Tomita <[email protected]>


2003-03-23 06:28:19

by Osamu Tomita

[permalink] [raw]
Subject: [PATCH 2.5.65-ac3] Updates for PC-9800 related (1/5) boot98

This is the update patch for NEC PC-9800 subarchitecture related files
against 2.5.65-ac3. (1/5)

Update alsa sound driver for PC-98.
Add missing target for PC-98 lost between 2.5.65-ac2 and 2.5.65-ac3.

Regards,
Osamu Tomita

diff -Nru linux-2.5.65-ac3/sound/core/Makefile linux98-2.5.65-ac3/sound/core/Makefile
--- linux-2.5.65-ac3/sound/core/Makefile 2003-03-23 11:47:19.000000000 +0900
+++ linux98-2.5.65-ac3/sound/core/Makefile 2003-03-23 12:13:28.000000000 +0900
@@ -95,6 +95,7 @@
obj-$(CONFIG_SND_YMFPCI) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o snd-rawmidi.o snd-hwdep.o
obj-$(CONFIG_SND_POWERMAC) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o
obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o
+obj-$(CONFIG_SND_PC98_CS4232) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o snd-rawmidi.o snd-hwdep.o
ifeq ($(CONFIG_SND_SB16_CSP),y)
obj-$(CONFIG_SND_SB16) += snd-hwdep.o
obj-$(CONFIG_SND_SBAWE) += snd-hwdep.o

2003-03-23 06:34:29

by Osamu Tomita

[permalink] [raw]
Subject: [PATCH 2.5.65-ac3] Updates for PC-9800 related (2/5) boot98

This is the update patch for NEC PC-9800 subarchitecture related files
against 2.5.65-ac3. (2/5)

Update arch/i386/Makefile and arch/i386/boot98/* to syncronize with 2.5.65.

Regards,
Osamu Tomita

diff -Nru linux-2.5.65-ac3/arch/i386/Makefile linux98-2.5.65-ac3/arch/i386/Makefile
--- linux-2.5.65-ac3/arch/i386/Makefile 2003-03-23 11:47:12.000000000 +0900
+++ linux98-2.5.65-ac3/arch/i386/Makefile 2003-03-23 11:48:52.000000000 +0900
@@ -65,10 +65,6 @@
mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-i386/mach-numaq
mcore-$(CONFIG_X86_NUMAQ) := mach-default

-# PC-9800 subarch support
-mflags-$(CONFIG_X86_PC9800) := -Iinclude/asm-i386/mach-pc9800
-mcore-$(CONFIG_X86_PC9800) := mach-pc9800
-
# BIGSMP subarch support
mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-i386/mach-bigsmp
mcore-$(CONFIG_X86_BIGSMP) := mach-default
@@ -77,6 +73,10 @@
mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
mcore-$(CONFIG_X86_SUMMIT) := mach-default

+# PC-9800 subarch support
+mflags-$(CONFIG_X86_PC9800) := -Iinclude/asm-i386/mach-pc9800
+mcore-$(CONFIG_X86_PC9800) := mach-pc9800
+
# default subarch .h files
mflags-y += -Iinclude/asm-i386/mach-default

diff -Nru linux-2.5.65-ac1/arch/i386/boot98/Makefile linux98-2.5.65/arch/i386/boot98/Makefile
--- linux-2.5.65-ac1/arch/i386/boot98/Makefile 2003-03-20 09:09:40.000000000 +0900
+++ linux98-2.5.65/arch/i386/boot98/Makefile 2003-03-18 08:52:00.000000000 +0900
@@ -25,9 +25,8 @@

#RAMDISK := -DRAMDISK=512

-EXTRA_TARGETS := vmlinux.bin bootsect bootsect.o \
- setup setup.o zImage bzImage
-
+targets := vmlinux.bin bootsect bootsect.o setup setup.o \
+ zImage bzImage
subdir- := compressed

host-progs := tools/build
@@ -62,8 +61,36 @@
$(Q)$(MAKE) -f scripts/Makefile.build obj=$(obj)/compressed \
IMAGE_OFFSET=$(IMAGE_OFFSET) $@

-zdisk: $(BOOTIMAGE)
- dd bs=8192 if=$(BOOTIMAGE) of=/dev/fd0
+# Set this if you want to pass append arguments to the zdisk/fdimage kernel
+FDARGS =
+
+$(obj)/mtools.conf: $(src)/mtools.conf.in
+ sed -e 's|@OBJ@|$(obj)|g' < $< > $@
+
+# This requires write access to /dev/fd0
+zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
+ MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
+ syslinux /dev/fd0 ; sync
+ echo 'default linux $(FDARGS)' | \
+ MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
+
+# These require being root or having syslinux 2.02 or higher installed
+fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
+ dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
+ MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
+ syslinux $(obj)/fdimage ; sync
+ echo 'default linux $(FDARGS)' | \
+ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
+
+fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
+ dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
+ MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
+ syslinux $(obj)/fdimage ; sync
+ echo 'default linux $(FDARGS)' | \
+ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync

zlilo: $(BOOTIMAGE)
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
diff -Nru linux-2.5.65-ac1/arch/i386/boot98/compressed/Makefile linux98-2.5.65/arch/i386/boot98/compressed/Makefile
--- linux-2.5.65-ac1/arch/i386/boot98/compressed/Makefile 2003-03-20 09:09:40.000000000 +0900
+++ linux98-2.5.65/arch/i386/boot98/compressed/Makefile 2003-03-18 08:52:00.000000000 +0900
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#

-EXTRA_TARGETS := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
EXTRA_AFLAGS := -traditional

LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32
diff -Nru linux-2.5.65/arch/i386/boot98/mtools.conf.in linux98-2.5.65/arch/i386/boot98/mtools.conf.in
--- linux-2.5.65/arch/i386/boot98/mtools.conf.in 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.65/arch/i386/boot98/mtools.conf.in 2003-03-18 08:52:00.000000000 +0900
@@ -0,0 +1,17 @@
+#
+# mtools configuration file for "make (b)zdisk"
+#
+
+# Actual floppy drive
+drive a:
+ file="/dev/fd0"
+
+# 1.44 MB floppy disk image
+drive v:
+ file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
+
+# 2.88 MB floppy disk image (mostly for virtual uses)
+drive w:
+ file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
+
+
diff -Nru linux-2.5.65-ac1/arch/i386/boot98/tools/build.c linux98-2.5.65/arch/i386/boot98/tools/build.c
--- linux-2.5.65-ac1/arch/i386/boot98/tools/build.c 2003-03-20 09:09:40.000000000 +0900
+++ linux98-2.5.65/arch/i386/boot98/tools/build.c 2003-03-18 10:39:05.000000000 +0900
@@ -149,13 +149,10 @@
sz = sb.st_size;
fprintf (stderr, "System is %d kB\n", sz/1024);
sys_size = (sz + 15) / 16;
- /* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */
- if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE))
+ /* 0x40000*16 = 4.0 MB, reasonable estimate for the current maximum */
+ if (sys_size > (is_big_kernel ? 0x40000 : DEF_SYSSIZE))
die("System is too big. Try using %smodules.",
is_big_kernel ? "" : "bzImage or ");
- if (sys_size > 0xefff)
- fprintf(stderr,"warning: kernel is too big for standalone boot "
- "from floppy\n");
while (sz > 0) {
int l, n;

2003-03-23 06:32:52

by Osamu Tomita

[permalink] [raw]
Subject: Re: [PATCH 2.5.65-ac3] Updates for PC-9800 related (1/5) boot98

On Sun, Mar 23, 2003 at 03:38:29PM +0900, Osamu Tomita wrote:
> This is the update patch for NEC PC-9800 subarchitecture related files
> against 2.5.65-ac3. (1/5)
>
> Update alsa sound driver for PC-98.
> Add missing target for PC-98 lost between 2.5.65-ac2 and 2.5.65-ac3.
>
> Regards,
> Osamu Tomita
>
> diff -Nru linux-2.5.65-ac3/sound/core/Makefile linux98-2.5.65-ac3/sound/core/Makefile
> --- linux-2.5.65-ac3/sound/core/Makefile 2003-03-23 11:47:19.000000000 +0900
> +++ linux98-2.5.65-ac3/sound/core/Makefile 2003-03-23 12:13:28.000000000 +0900
> @@ -95,6 +95,7 @@
> obj-$(CONFIG_SND_YMFPCI) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o snd-rawmidi.o snd-hwdep.o
> obj-$(CONFIG_SND_POWERMAC) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o
> obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o
> +obj-$(CONFIG_SND_PC98_CS4232) += snd-pcm.o snd-timer.o snd-page-alloc.o snd.o snd-rawmidi.o snd-hwdep.o
> ifeq ($(CONFIG_SND_SB16_CSP),y)
> obj-$(CONFIG_SND_SB16) += snd-hwdep.o
> obj-$(CONFIG_SND_SBAWE) += snd-hwdep.o
Sorry, I mis-type subject. This is ALSA update.

Osamu Tomita

2003-03-23 06:35:44

by Osamu Tomita

[permalink] [raw]
Subject: [PATCH 2.5.65-ac3] Updates for PC-9800 related (3/5) floppy98

This is the update patch for NEC PC-9800 subarchitecture related files
against 2.5.65-ac3. (3/5)

Update drivers/block/floppy98.c to syncronize with 2.5.65.
(Driver for PC98 standard floppy disk drive.)

Regards,
Osamu Tomita

diff -Nru linux-2.5.65-ac1/drivers/block/floppy98.c linux98-2.5.65/drivers/block/floppy98.c
--- linux-2.5.65-ac1/drivers/block/floppy98.c 2003-03-20 09:09:42.000000000 +0900
+++ linux98-2.5.65/drivers/block/floppy98.c 2003-03-18 11:57:40.000000000 +0900
@@ -4273,8 +4273,7 @@
}

devfs_mk_dir (NULL, "floppy", NULL);
- if (register_blkdev(FLOPPY_MAJOR,"fd",&floppy_fops)) {
- printk("Unable to get major %d for floppy\n",FLOPPY_MAJOR);
+ if (register_blkdev(FLOPPY_MAJOR,"fd")) {
err = -EBUSY;
goto out;
}

2003-03-23 06:36:58

by Osamu Tomita

[permalink] [raw]
Subject: [PATCH 2.5.65-ac3] Updates for PC-9800 related (4/5) NIC

This is the update patch for NEC PC-9800 subarchitecture related files
against 2.5.65-ac3. (4/5)

Update network card patch.
Remove duplicated C-bus cards entry from Kconfig.

Regards,
Osamu Tomita

diff -Nru linux-2.5.65-ac3/drivers/net/Kconfig linux98-2.5.65-ac3/drivers/net/Kconfig
--- linux-2.5.65-ac3/drivers/net/Kconfig 2003-03-23 11:47:15.000000000 +0900
+++ linux98-2.5.65-ac3/drivers/net/Kconfig 2003-03-23 11:56:18.000000000 +0900
@@ -1225,55 +1225,6 @@
bool "NEC PC-9801-108 Support"
depends on NE2K_CBUS

-config NET_CBUS
- bool "NEC PC-9800 C-bus cards"
- depends on NET_ETHERNET && ISA && X86_PC9800
- ---help---
- If your network (Ethernet) card hasn't been mentioned yet and its
- bus system (that's the way the cards talks to the other components
- of your computer) is NEC PC-9800 C-Bus, say Y.
-
-config NE2K_CBUS
- tristate "Most NE2000-based Ethernet support"
- depends on NET_CBUS
-
-config NE2K_CBUS_EGY98
- bool "Melco EGY-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_LGY98
- bool "Melco LGY-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_ICM
- bool "ICM IF-27xxET support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_IOLA98
- bool "I-O DATA LA-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL
- bool "Contec C-NET(98)E/L support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL_IO_BASE
- hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
- depends on NE2K_CBUS_CNET98EL
- default "0xaaed"
-
-config NE2K_CBUS_ATLA98
- bool "Allied Telesis LA-98 Support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_BDN
- bool "ELECOM Laneed LD-BDN[123]A Support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_NEC108
- bool "NEC PC-9801-108 Support"
- depends on NE2K_CBUS
-
config SKMC
tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA

2003-03-23 06:39:06

by Osamu Tomita

[permalink] [raw]
Subject: [PATCH 2.5.65-ac3] Updates for PC-9800 related (5/5) video

This is the update patch for NEC PC-9800 subarchitecture related files
against 2.5.65-ac3. (5/5)

Add missing patch. These files are lost between 2.5.64-ac4 and 2.5.65-ac1.
(PC98 standard video card text mode driver.)

Regards,
Osamu Tomita

diff -Nru linux-2.5.60/drivers/video/console/Makefile linux98-2.5.60/drivers/video/console/Makefile
--- linux-2.5.60/drivers/video/console/Makefile 2003-02-11 03:38:30.000000000 +0900
+++ linux98-2.5.60/drivers/video/console/Makefile 2003-02-11 09:47:18.000000000 +0900
@@ -19,6 +19,7 @@
# Each configuration option enables a list of files.

obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o
+obj-$(CONFIG_GDC_CONSOLE) += gdccon.o
obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o
obj-$(CONFIG_PROM_CONSOLE) += promcon.o promcon_tbl.o
obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o
diff -Nru linux-2.5.61/drivers/video/console/gdccon.c linux98-2.5.61/drivers/video/console/gdccon.c
--- linux-2.5.61/drivers/video/console/gdccon.c 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.61/drivers/video/console/gdccon.c 2003-02-16 17:19:03.000000000 +0900
@@ -0,0 +1,833 @@
+/*
+ * linux/drivers/video/gdccon.c
+ * Low level GDC based console driver for NEC PC-9800 series
+ *
+ * Created 24 Dec 1998 by Linux/98 project
+ *
+ * based on:
+ * linux/drivers/video/vgacon.c in Linux 2.1.131 by Geert Uytterhoeven
+ * linux/char/gdc.c in Linux/98 2.1.57 by Linux/98 project
+ * linux/char/console.c in Linux/98 2.1.57 by Linux/98 project
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <linux/kd.h>
+#include <linux/slab.h>
+#include <linux/vt_kern.h>
+#include <linux/selection.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/pc9800.h>
+
+static spinlock_t gdc_lock = SPIN_LOCK_UNLOCKED;
+
+static char str_gdc_master[] = "GDC (master)";
+static char str_gdc_slave[] = "GDC (slave)";
+static char str_crtc[] = "crtc";
+static struct resource gdc_console_resources[] = {
+ {str_gdc_master, 0x60, 0x60, 0},
+ {str_gdc_master, 0x62, 0x62, 0},
+ {str_gdc_master, 0x64, 0x64, 0},
+ {str_gdc_master, 0x66, 0x66, 0},
+ {str_gdc_master, 0x68, 0x68, 0},
+ {str_gdc_master, 0x6a, 0x6a, 0},
+ {str_gdc_master, 0x6c, 0x6c, 0},
+ {str_gdc_master, 0x6e, 0x6e, 0},
+ {str_crtc, 0x70, 0x70, 0},
+ {str_crtc, 0x72, 0x72, 0},
+ {str_crtc, 0x74, 0x74, 0},
+ {str_crtc, 0x76, 0x76, 0},
+ {str_crtc, 0x78, 0x78, 0},
+ {str_crtc, 0x7a, 0x7a, 0},
+ {str_gdc_slave, 0xa0, 0xa0, 0},
+ {str_gdc_slave, 0xa2, 0xa2, 0},
+ {str_gdc_slave, 0xa4, 0xa4, 0},
+ {str_gdc_slave, 0xa6, 0xa6, 0},
+};
+
+#define GDC_CONSOLE_RESOURCES (sizeof(gdc_console_resources)/sizeof(struct resource))
+
+#define BLANK 0x0020
+#define BLANK_ATTR 0x00e1
+
+/* GDC/GGDC port# */
+#define GDC_COMMAND 0x62
+#define GDC_PARAM 0x60
+#define GDC_STAT 0x60
+#define GDC_DATA 0x62
+
+#define MODE_FF1 (0x0068) /* mode F/F register 1 */
+
+#define MODE_FF1_ATR_SEL (0x00) /* 0: vertical line 1: 8001 graphic */
+#define MODE_FF1_GRAPHIC_MODE (0x02) /* 0: color 1: mono */
+#define MODE_FF1_COLUMN_WIDTH (0x04) /* 0: 80col 1: 40col */
+#define MODE_FF1_FONT_SEL (0x06) /* 0: 6x8 1: 7x13 */
+#define MODE_FF1_GRP_MODE (0x08) /* 0: display odd-y raster 1: not */
+#define MODE_FF1_KAC_MODE (0x0a) /* 0: code access 1: dot access */
+#define MODE_FF1_NVMW_PERMIT (0x0c) /* 0: protect 1: permit */
+#define MODE_FF1_DISP_ENABLE (0x0e) /* 0: enable 1: disable */
+
+#define GGDC_COMMAND 0xa2
+#define GGDC_PARAM 0xa0
+#define GGDC_STAT 0xa0
+#define GGDC_DATA 0xa2
+
+/* GDC status */
+#define GDC_DATA_READY (1 << 0)
+#define GDC_FIFO_FULL (1 << 1)
+#define GDC_FIFO_EMPTY (1 << 2)
+#define GGDC_FIFO_EMPTY GDC_FIFO_EMPTY
+#define GDC_DRAWING (1 << 3)
+#define GDC_DMA_EXECUTE (1 << 4) /* nonsense on 98 */
+#define GDC_VERTICAL_SYNC (1 << 5)
+#define GDC_HORIZONTAL_BLANK (1 << 6)
+#define GDC_LIGHTPEN_DETECT (1 << 7) /* nonsense on 98 */
+
+#define ATTR_G (1U << 7)
+#define ATTR_R (1U << 6)
+#define ATTR_B (1U << 5)
+#define ATTR_GRAPHIC (1U << 4)
+#define ATTR_VERTBAR ATTR_GRAPHIC /* vertical bar */
+#define ATTR_UNDERLINE (1U << 3)
+#define ATTR_REVERSE (1U << 2)
+#define ATTR_BLINK (1U << 1)
+#define ATTR_NOSECRET (1U << 0)
+#define AMASK_NOCOLOR (ATTR_GRAPHIC | ATTR_UNDERLINE | ATTR_REVERSE \
+ | ATTR_BLINK | ATTR_NOSECRET)
+
+/*
+ * Interface used by the world
+ */
+static const char *gdccon_startup(void);
+static void gdccon_init(struct vc_data *c, int init);
+static void gdccon_deinit(struct vc_data *c);
+static void gdccon_cursor(struct vc_data *c, int mode);
+static int gdccon_switch(struct vc_data *c);
+static int gdccon_blank(struct vc_data *c, int blank);
+static int gdccon_scrolldelta(struct vc_data *c, int lines);
+static int gdccon_set_origin(struct vc_data *c);
+static void gdccon_save_screen(struct vc_data *c);
+static int gdccon_scroll(struct vc_data *c, int t, int b, int dir, int lines);
+static u8 gdccon_build_attr(struct vc_data *c, u8 color, u8 intensity, u8 blink, u8 underline, u8 reverse);
+static void gdccon_invert_region(struct vc_data *c, u16 *p, int count);
+static unsigned long gdccon_uni_pagedir[2];
+
+/* Description of the hardware situation */
+static unsigned long gdc_vram_base; /* Base of video memory */
+static unsigned long gdc_vram_end; /* End of video memory */
+static unsigned int gdc_video_num_columns = 80;
+ /* Number of text columns */
+static unsigned int gdc_video_num_lines = 25;
+ /* Number of text lines */
+static int gdc_can_do_color = 1; /* Do we support colors? */
+static unsigned char gdc_video_type; /* Card type */
+static unsigned char gdc_hardscroll_enabled;
+static unsigned char gdc_hardscroll_user_enable = 1;
+static int gdc_vesa_blanked = 0;
+static unsigned int gdc_rolled_over = 0;
+
+#define DISP_FREQ_AUTO 0
+#define DISP_FREQ_25k 1
+#define DISP_FREQ_31k 2
+
+static unsigned int gdc_disp_freq = DISP_FREQ_AUTO;
+
+#define gdc_attr_offset(x) ((typeof(x))((unsigned long)(x)+0x2000))
+
+#define gdc_outb(val, port) outb_p((val), (port))
+#define gdc_inb(port) inb_p(port)
+
+#define __gdc_write_command(cmd) gdc_outb((cmd), GDC_COMMAND)
+#define __gdc_write_param(param) gdc_outb((param), GDC_PARAM)
+
+static const char * __init gdccon_startup(void)
+{
+ const char *display_desc = NULL;
+ unsigned long hdots = gdc_video_num_lines * 16;
+ int i;
+
+ while (!(inb_p(GDC_STAT) & GDC_FIFO_EMPTY));
+ while (!(inb_p(GGDC_STAT) & GDC_FIFO_EMPTY));
+ spin_lock_irq(&gdc_lock);
+ outb_p(0x0c, GDC_COMMAND); /* STOP */
+ outb_p(0x0c, GGDC_COMMAND); /* STOP */
+ if (PC9800_9821_P() && gdc_disp_freq == DISP_FREQ_AUTO) {
+ if (gdc_video_num_lines >= 30 || (inb(0x9a8) & 0x01)) {
+ gdc_disp_freq = DISP_FREQ_31k;
+ }
+ }
+
+ if (PC9800_9821_P() && gdc_disp_freq == DISP_FREQ_31k) {
+ outb_p(0x01, 0x9a8); /* 31.47KHz */
+ outb_p(0x0e, GDC_COMMAND); /* SYNC, DE deny */
+ outb_p(0x00, GDC_PARAM); /* CHR, F, I, D, G, S = 0 */
+ outb_p(0x4e, GDC_PARAM); /* C/R = 78 (80 chars) */
+ outb_p(0x4b, GDC_PARAM); /* VSL = 2(3) ; HS = 11 */
+ outb_p(0x0c, GDC_PARAM); /* HFP = 3 ; VSH = 0(VS=2) */
+ outb_p(0x03, GDC_PARAM); /* DS, PH = 0 ; HBP = 3 */
+ outb_p(0x06, GDC_PARAM); /* VH, VL = 0 ; VFP = 6 */
+ outb_p(hdots & 0xff, GDC_PARAM); /* LFL */
+ outb_p(0x94 | ((hdots >> 8) & 0x03), GDC_PARAM);
+ /* VBP = 37 ; LFH */
+ outb_p(0x47, GDC_COMMAND); /* PITCH */
+ outb_p(0x50, GDC_PARAM);
+
+ outb_p(0x70, GDC_COMMAND); /* SCROLL */
+ outb_p(0x00, GDC_PARAM);
+ outb_p(0x00, GDC_PARAM);
+ outb_p((hdots << 4) & 0xf0, GDC_PARAM); /* SL1=592 (0x250) */
+ outb_p((hdots >> 4) & 0x3f, GDC_PARAM);
+
+ outb_p(0x0e, GGDC_COMMAND); /* SYNC, DE deny */
+ outb_p(0x00, GGDC_PARAM); /* CHR, F, I, D, G, S = 0 */
+ outb_p(0x4e, GGDC_PARAM); /* C/R = 78 (80 chars) */
+ outb_p(0x4b, GGDC_PARAM); /* VSL = 2(3) ; HS = 11 */
+ outb_p(0x0c, GGDC_PARAM); /* HFP = 3 ; VSH = 0(VS=2) */
+ outb_p(0x03, GGDC_PARAM); /* DS, PH = 0 ; HBP = 3 */
+ outb_p(0x06, GGDC_PARAM); /* VH, VL = 0 ; VFP = 6 */
+ outb_p(hdots & 0xff, GGDC_PARAM); /* LFL */
+ outb_p(0x94 | ((hdots >> 8) & 0x03), GGDC_PARAM);
+ /* VBP = 37 ; LFH */
+ } else {
+ outb_p(0x00, 0x9a8); /* 24.83 KHz */
+ outb_p(0x0e, GDC_COMMAND); /* SYNC, DE deny */
+ outb_p(0x00, GDC_PARAM); /* CHR, F, I, D, G, S = 0 */
+ outb_p(0x4e, GDC_PARAM); /* C/R = 78 (80 chars) */
+ outb_p(0x07, GDC_PARAM); /* VSL = 0(3) ; HS = 7 */
+ outb_p(0x25, GDC_PARAM); /* HFP = 9 ; VSH = 1(VS=8) */
+ outb_p(0x07, GDC_PARAM); /* DS, PH = 0 ; HBP = 7 */
+ outb_p(0x07, GDC_PARAM); /* VH, VL = 0 ; VFP = 7 */
+ outb_p(hdots & 0xff, GDC_PARAM); /* LFL */
+ outb_p(0x64 | ((hdots >> 8) & 0x03), GDC_PARAM);
+ /* VBP = 25 ; LFH */
+ outb_p(0x47, GDC_COMMAND); /* PITCH */
+ outb_p(0x50, GDC_PARAM);
+
+ outb_p(0x70, GDC_COMMAND); /* SCROLL */
+ outb_p(0x00, GDC_PARAM);
+ outb_p(0x00, GDC_PARAM);
+ outb_p((hdots << 4) & 0xf0, GDC_PARAM); /* SL1=592 (0x250) */
+ outb_p((hdots >> 4) & 0x3f, GDC_PARAM);
+
+ outb_p(0x0e, GGDC_COMMAND); /* SYNC */
+ outb_p(0x00, GGDC_PARAM);
+ outb_p(0x4e, GGDC_PARAM);
+ outb_p(0x07, GGDC_PARAM);
+ outb_p(0x25, GGDC_PARAM);
+ outb_p(0x07, GGDC_PARAM);
+ outb_p(0x07, GGDC_PARAM);
+ outb_p(hdots & 0xff, GGDC_PARAM); /* LFL */
+ outb_p(0x64 | ((hdots >> 8) & 0x03), GGDC_PARAM);
+ /* VBP = 25 ; LFH */
+ }
+
+ outb_p(0x47, GGDC_COMMAND); /* PITCH */
+ outb_p(0x28, GGDC_PARAM);
+
+ outb_p(0x0d, GDC_COMMAND); /* START */
+ outb_p(0x0d, GGDC_COMMAND); /* START */
+ spin_unlock_irq(&gdc_lock);
+
+ gdc_vram_base = (unsigned long)phys_to_virt(0xa0000);
+ /* Last few bytes of text VRAM area are for NVRAM. */
+ gdc_vram_end = gdc_vram_base + 0x1fe0;
+
+ if (!PC9800_HIGHRESO_P()) {
+ gdc_video_type = VIDEO_TYPE_98NORMAL;
+ display_desc = "NEC PC-9800 Normal";
+ } else {
+ gdc_video_type = VIDEO_TYPE_98HIRESO;
+ display_desc = "NEC PC-9800 High Resolution";
+ }
+
+ gdc_hardscroll_enabled = gdc_hardscroll_user_enable;
+
+ for (i = 0; i < GDC_CONSOLE_RESOURCES; i++)
+ request_resource(&ioport_resource, gdc_console_resources + i);
+
+ return display_desc;
+}
+
+static void gdccon_init(struct vc_data *c, int init)
+{
+ unsigned long p;
+
+ /* We cannot be loaded as a module, therefore init is always 1 */
+ c->vc_can_do_color = gdc_can_do_color;
+ c->vc_cols = gdc_video_num_columns;
+ c->vc_rows = gdc_video_num_lines;
+ c->vc_complement_mask = ATTR_REVERSE << 8;
+ p = *c->vc_uni_pagedir_loc;
+ if (c->vc_uni_pagedir_loc == &c->vc_uni_pagedir
+ || !--c->vc_uni_pagedir_loc[1])
+ con_free_unimap(c->vc_num);
+
+ c->vc_uni_pagedir_loc = gdccon_uni_pagedir;
+ gdccon_uni_pagedir[1]++;
+ if (!gdccon_uni_pagedir[0] && p)
+ con_set_default_unimap(c->vc_num);
+}
+
+static inline void gdc_set_mem_top(struct vc_data *c)
+{
+ unsigned long flags;
+ unsigned long origin = (c->vc_visible_origin - gdc_vram_base) / 2;
+
+ spin_lock_irqsave(&gdc_lock, flags);
+ while (!(inb_p(GDC_STAT) & GDC_FIFO_EMPTY));
+ __gdc_write_command(0x70); /* SCROLL */
+ __gdc_write_param(origin); /* SAD1 (L) */
+ __gdc_write_param((origin >> 8) & 0x1f); /* SAD1 (H) */
+ spin_unlock_irqrestore(&gdc_lock, flags);
+}
+
+static void gdccon_deinit(struct vc_data *c)
+{
+ /* When closing the last console, reset video origin */
+ if (!--gdccon_uni_pagedir[1]) {
+ c->vc_visible_origin = gdc_vram_base;
+ gdc_set_mem_top(c);
+ con_free_unimap(c->vc_num);
+ }
+
+ c->vc_uni_pagedir_loc = &c->vc_uni_pagedir;
+ con_set_default_unimap(c->vc_num);
+}
+
+#if 0
+/* Translate ANSI terminal color code to GDC color code. */
+#define BGR_TO_GRB(bgr) ((((bgr) & 4) >> 2) | (((bgr) & 3) << 1))
+#else
+#define RGB_TO_GRB(rgb) ((((rgb) & 4) >> 1) | (((rgb) & 2) << 1) | ((rgb) & 1))
+#endif
+
+static const u8 gdccon_color_table[] = {
+#define C(color) ((RGB_TO_GRB (color) << 5) | ATTR_NOSECRET)
+ C(0), C(1), C(2), C(3), C(4), C(5), C(6), C(7)
+#undef C
+};
+
+static u8 gdccon_build_attr(struct vc_data *c, u8 color, u8 intensity, u8 blink, u8 underline, u8 reverse)
+{
+ u8 attr = gdccon_color_table[color & 0x07];
+
+ if (!gdc_can_do_color)
+ attr = (intensity == 0 ? 0x61
+ : intensity == 2 ? 0xe1 : 0xa1);
+
+ if (underline)
+ attr |= 0x08;
+
+ /* ignore intensity */
+#if 0
+ if(intensity == 0)
+ ;
+ else if (intensity == 2)
+ attr |= 0x10; /* virtical line */
+#else
+ if (intensity == 0) {
+ if (attr == c->vc_def_attr)
+ attr = c->vc_half_attr;
+ else
+ attr |= c->vc_half_attr & AMASK_NOCOLOR;
+ } else if (intensity == 2) {
+ if (attr == c->vc_def_attr)
+ attr = c->vc_bold_attr;
+ else
+ attr |= c->vc_bold_attr & AMASK_NOCOLOR;
+ }
+#endif
+ if (reverse)
+ attr |= ATTR_REVERSE;
+
+ if ((color & 0x07) == 0) { /* foreground color == black */
+ /* Fake background color by reversed character
+ as GDC cannot set background color. */
+ attr |= gdccon_color_table[(color >> 4) & 0x07];
+ attr ^= ATTR_REVERSE;
+ }
+
+ if (blink)
+ attr |= ATTR_BLINK;
+
+ return attr;
+}
+
+static void gdccon_invert_region(struct vc_data *c, u16 *p, int count)
+{
+ while (count--) {
+ *((u16 *)(gdc_attr_offset(p))) ^= ATTR_REVERSE;
+ p++;
+ }
+}
+
+static u8 gdc_csrform_lr = 15; /* Lines/Row */
+static u16 gdc_csrform_bl_bd = ((12 << 6) /* BLinking Rate */
+ | (0 << 5)); /* Blinking Disable */
+
+static inline void gdc_hide_cursor(void)
+{
+ __gdc_write_command(0x4b); /* CSRFORM */
+ __gdc_write_param(gdc_csrform_lr); /* CS = 0, CE = 0, L/R = ? */
+}
+
+static inline void gdc_show_cursor(int cursor_start, int cursor_finish)
+{
+ __gdc_write_command(0x4b); /* CSRFORM */
+ __gdc_write_param(0x80 | gdc_csrform_lr); /* CS = 1 */
+ __gdc_write_param(cursor_start | gdc_csrform_bl_bd);
+ __gdc_write_param((cursor_finish << 3) | (gdc_csrform_bl_bd >> 8));
+}
+
+static void gdccon_cursor(struct vc_data *c, int mode)
+{
+ unsigned long flags;
+ u16 ead;
+
+ if (c->vc_origin != c->vc_visible_origin)
+ gdccon_scrolldelta(c, 0);
+
+ spin_lock_irqsave(&gdc_lock, flags);
+ while (!(inb_p(GDC_STAT) & GDC_FIFO_EMPTY));
+ spin_unlock_irqrestore(&gdc_lock, flags);
+ switch (mode) {
+ case CM_ERASE:
+ gdc_hide_cursor();
+ break;
+
+ case CM_MOVE:
+ case CM_DRAW:
+ switch (c->vc_cursor_type & 0x0f) {
+ case CUR_UNDERLINE:
+ gdc_show_cursor(14, 15); /* XXX font height */
+ break;
+
+ case CUR_TWO_THIRDS:
+ gdc_show_cursor(5, 15); /* XXX */
+ break;
+
+ case CUR_LOWER_THIRD:
+ gdc_show_cursor(11, 15); /* XXX */
+ break;
+
+ case CUR_LOWER_HALF:
+ gdc_show_cursor(8, 15); /* XXX */
+ break;
+
+ case CUR_NONE:
+ gdc_hide_cursor();
+ break;
+
+ default:
+ gdc_show_cursor(0, 15); /* XXX */
+ break;
+ }
+
+ spin_lock_irqsave(&gdc_lock, flags);
+ __gdc_write_command(0x49); /* CSRW */
+ ead = (c->vc_pos - gdc_vram_base) >> 1;
+ __gdc_write_param(ead);
+ __gdc_write_param((ead >> 8) & 0x1f);
+ spin_unlock_irqrestore(&gdc_lock, flags);
+ break;
+ }
+
+}
+
+static int gdccon_switch(struct vc_data *c)
+{
+ /*
+ * We need to save screen size here as it's the only way
+ * we can spot the screen has been resized and we need to
+ * set size of freshly allocated screens ourselves.
+ */
+ gdc_video_num_columns = c->vc_cols;
+ gdc_video_num_lines = c->vc_rows;
+ if (c->vc_origin != (unsigned long)c->vc_screenbuf
+ && gdc_vram_base <= c->vc_origin && c->vc_origin < gdc_vram_end) {
+ _scr_memcpyw_to((u16 *)c->vc_origin,
+ (u16 *)c->vc_screenbuf,
+ c->vc_screenbuf_size);
+ _scr_memcpyw_to((u16 *)gdc_attr_offset(c->vc_origin),
+ (u16 *)((char *)c->vc_screenbuf
+ + c->vc_screenbuf_size),
+ c->vc_screenbuf_size);
+ } else
+ printk(KERN_WARNING
+ "gdccon: switch (vc #%d) called on origin=%lx\n",
+ c->vc_num, c->vc_origin);
+
+ return 0; /* Redrawing not needed */
+}
+
+static int gdccon_set_palette(struct vc_data *c, unsigned char *table)
+{
+ return -EINVAL;
+}
+
+#define RELAY0 0x01
+#define RELAY0_GDC 0x00
+#define RELAY0_ACCEL 0x01
+#define RELAY1 0x02
+#define RELAY1_INTERNAL 0x00
+#define RELAY1_EXTERNAL 0x02
+#define IO_RELAY 0x0fac
+#define IO_DPMS 0x09a2
+static unsigned char relay_mode = RELAY0_GDC | RELAY1_INTERNAL;
+
+static void gdc_vesa_blank(int mode)
+{
+ unsigned char stat;
+
+ spin_lock_irq(&gdc_lock);
+
+ relay_mode = inb_p(IO_RELAY);
+ if ((relay_mode & (RELAY0 | RELAY1)) != (RELAY0_GDC | RELAY1_INTERNAL)) {
+#ifdef CONFIG_DONTTOUCHRELAY
+ spin_unlock_irq(&gdc_lock);
+ return;
+#else
+ outb_p((relay_mode & ~(RELAY0 | RELAY1)) |
+ RELAY0_GDC | RELAY1_INTERNAL , IO_RELAY);
+#endif
+ }
+
+ if (mode & VESA_VSYNC_SUSPEND) {
+ stat = inb_p(IO_DPMS);
+ outb_p(stat | 0x80, IO_DPMS);
+ }
+ if (mode & VESA_HSYNC_SUSPEND) {
+ stat = inb_p(IO_DPMS);
+ outb_p(stat | 0x40, IO_DPMS);
+ }
+
+ spin_unlock_irq(&gdc_lock);
+}
+
+static void gdc_vesa_unblank(void)
+{
+ unsigned char stat;
+
+#ifdef CONFIG_DONTTOUCHRELAY
+ if (relay_mode & (RELAY0 | RELAY1))
+ return;
+#endif
+
+ spin_lock_irq(&gdc_lock);
+
+ stat = inb_p(0x09a2);
+ outb_p(stat & ~0xc0, IO_DPMS);
+ if (relay_mode & (RELAY0 | RELAY1))
+ outb_p(relay_mode, IO_RELAY);
+
+ spin_unlock_irq(&gdc_lock);
+}
+
+static int gdccon_blank(struct vc_data *c, int blank)
+{
+ switch (blank) {
+ case 0: /* Unblank */
+ if (gdc_vesa_blanked) {
+ gdc_vesa_unblank();
+ gdc_vesa_blanked = 0;
+ }
+
+ outb(MODE_FF1_DISP_ENABLE | 1, MODE_FF1);
+
+ /* Tell console.c that it need not to restore the screen */
+ return 0;
+
+ case 1: /* Normal blanking */
+ /* Disable displaying */
+ outb(MODE_FF1_DISP_ENABLE | 0, MODE_FF1);
+
+ /* Tell console.c that it need not to reset origin */
+ return 0;
+
+ case -1: /* Entering graphic mode */
+ return 1;
+
+ default: /* VESA blanking */
+ if (gdc_video_type == VIDEO_TYPE_98NORMAL
+ || gdc_video_type == VIDEO_TYPE_9840
+ || gdc_video_type == VIDEO_TYPE_98HIRESO) {
+ gdc_vesa_blank(blank - 1);
+ gdc_vesa_blanked = blank;
+ }
+
+ return 0;
+ }
+}
+
+static int gdccon_font_op(struct vc_data *c, struct console_font_op *op)
+{
+ return -ENOSYS;
+}
+
+static int gdccon_scrolldelta(struct vc_data *c, int lines)
+{
+ if (!lines) /* Turn scrollback off */
+ c->vc_visible_origin = c->vc_origin;
+ else {
+ int vram_size = gdc_vram_end - gdc_vram_base;
+ int margin = c->vc_size_row /* * 4 */;
+ int ul, we, p, st;
+
+ if (gdc_rolled_over > c->vc_scr_end - gdc_vram_base + margin) {
+ ul = c->vc_scr_end - gdc_vram_base;
+ we = gdc_rolled_over + c->vc_size_row;
+ } else {
+ ul = 0;
+ we = vram_size;
+ }
+
+ p = (c->vc_visible_origin - gdc_vram_base - ul + we)
+ % we + lines * c->vc_size_row;
+ st = (c->vc_origin - gdc_vram_base - ul + we) % we;
+ if (p < margin)
+ p = 0;
+
+ if (p > st - margin)
+ p = st;
+ c->vc_visible_origin = gdc_vram_base + (p + ul) % we;
+ }
+
+ gdc_set_mem_top(c);
+ return 1;
+}
+
+static int gdccon_set_origin(struct vc_data *c)
+{
+ c->vc_origin = c->vc_visible_origin = gdc_vram_base;
+ gdc_set_mem_top(c);
+ gdc_rolled_over = 0;
+ return 1;
+}
+
+static void gdccon_save_screen(struct vc_data *c)
+{
+ static int gdc_bootup_console = 0;
+
+ if (!gdc_bootup_console) {
+ /* This is a gross hack, but here is the only place we can
+ * set bootup console parameters without messing up generic
+ * console initialization routines.
+ */
+ gdc_bootup_console = 1;
+ c->vc_x = ORIG_X;
+ c->vc_y = ORIG_Y;
+ }
+
+ _scr_memcpyw_from((u16 *)c->vc_screenbuf,
+ (u16 *)c->vc_origin, c->vc_screenbuf_size);
+ _scr_memcpyw_from((u16 *)((char *)c->vc_screenbuf + c->vc_screenbuf_size), (u16 *)gdc_attr_offset(c->vc_origin), c->vc_screenbuf_size);
+}
+
+static int gdccon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
+{
+ unsigned long oldo;
+ unsigned int delta;
+
+ if (t || b != c->vc_rows)
+ return 0;
+
+ if (c->vc_origin != c->vc_visible_origin)
+ gdccon_scrolldelta(c, 0);
+
+ if (!gdc_hardscroll_enabled || lines >= c->vc_rows / 2)
+ return 0;
+
+ oldo = c->vc_origin;
+ delta = lines * c->vc_size_row;
+ if (dir == SM_UP) {
+ if (c->vc_scr_end + delta >= gdc_vram_end) {
+ _scr_memcpyw((u16 *)gdc_vram_base,
+ (u16 *)(oldo + delta),
+ c->vc_screenbuf_size - delta);
+ _scr_memcpyw((u16 *)gdc_attr_offset(gdc_vram_base),
+ (u16 *)gdc_attr_offset(oldo + delta),
+ c->vc_screenbuf_size - delta);
+ c->vc_origin = gdc_vram_base;
+ gdc_rolled_over = oldo - gdc_vram_base;
+ } else
+ c->vc_origin += delta;
+
+ _scr_memsetw((u16 *)(c->vc_origin + c->vc_screenbuf_size - delta), c->vc_video_erase_char & 0xff, delta);
+ _scr_memsetw((u16 *)gdc_attr_offset(c->vc_origin + c->vc_screenbuf_size - delta), c->vc_video_erase_char >> 8, delta);
+ } else {
+ if (oldo - delta < gdc_vram_base) {
+ _scr_memmovew((u16 *)(gdc_vram_end - c->vc_screenbuf_size + delta), (u16 *)oldo, c->vc_screenbuf_size - delta);
+ _scr_memmovew((u16 *)gdc_attr_offset(gdc_vram_end - c->vc_screenbuf_size + delta), (u16 *)gdc_attr_offset(oldo), c->vc_screenbuf_size - delta);
+ c->vc_origin = gdc_vram_end - c->vc_screenbuf_size;
+ gdc_rolled_over = 0;
+ } else
+ c->vc_origin -= delta;
+
+ c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
+ _scr_memsetw((u16 *)(c->vc_origin), c->vc_video_erase_char & 0xff, delta);
+ _scr_memsetw((u16 *)gdc_attr_offset(c->vc_origin), c->vc_video_erase_char >> 8, delta);
+ }
+
+ c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size;
+ c->vc_visible_origin = c->vc_origin;
+ gdc_set_mem_top(c);
+ c->vc_pos = (c->vc_pos - oldo) + c->vc_origin;
+ return 1;
+}
+
+static int gdccon_setterm_command(struct vc_data *c)
+{
+ switch (c->vc_par[0]) {
+ case 1: /* set attr for underline mode */
+ if (c->vc_npar < 2) {
+ if (c->vc_par[1] < 16)
+ c->vc_ul_attr = gdccon_color_table[color_table[c->vc_par[1]] & 7];
+ } else {
+ if (c->vc_par[2] < 256)
+ c->vc_ul_attr = c->vc_par[2];
+ }
+
+ if (c->vc_underline)
+ goto update_attr;
+
+ return 1;
+
+ case 2: /* set attr for half intensity mode */
+ if (c->vc_npar < 2) {
+ if (c->vc_par[1] < 16)
+ c->vc_half_attr = gdccon_color_table[color_table[c->vc_par[1]] & 7];
+ }
+ else {
+ if (c->vc_par[2] < 256)
+ c->vc_half_attr = c->vc_par[2];
+ }
+
+ if (c->vc_intensity == 0)
+ goto update_attr;
+
+ return 1;
+
+ case 3: /* set color for bold mode */
+ if (c->vc_npar < 2) {
+ if (c->vc_par[1] < 16)
+ c->vc_bold_attr = gdccon_color_table[color_table[c->vc_par[1]] & 7];
+ } else {
+ if (c->vc_par[2] < 256)
+ c->vc_bold_attr = c->vc_par[2];
+ }
+
+ if (c->vc_intensity == 2)
+ goto update_attr;
+
+ return 1;
+ }
+
+ return 0;
+
+update_attr:
+ c->vc_attr = gdccon_build_attr(c,
+ c->vc_color, c->vc_intensity,
+ c->vc_blink, c->vc_underline,
+ c->vc_reverse);
+ return 1;
+}
+
+/*
+ * The console `switch' structure for the GDC based console
+ */
+
+static int gdccon_dummy(struct vc_data *c)
+{
+ return 0;
+}
+
+#define DUMMY (void *) gdccon_dummy
+
+const struct consw gdc_con = {
+ .con_startup = gdccon_startup,
+ .con_init = gdccon_init,
+ .con_deinit = gdccon_deinit,
+ .con_clear = DUMMY,
+ .con_putc = DUMMY,
+ .con_putcs = DUMMY,
+ .con_cursor = gdccon_cursor,
+ .con_scroll = gdccon_scroll,
+ .con_bmove = DUMMY,
+ .con_switch = gdccon_switch,
+ .con_blank = gdccon_blank,
+ .con_font_op = gdccon_font_op,
+ .con_set_palette = gdccon_set_palette,
+ .con_scrolldelta = gdccon_scrolldelta,
+ .con_set_origin = gdccon_set_origin,
+ .con_save_screen = gdccon_save_screen,
+ .con_build_attr = gdccon_build_attr,
+ .con_invert_region = gdccon_invert_region,
+ .con_setterm_command = gdccon_setterm_command
+};
+
+static int __init gdc_setup(char *str)
+{
+ unsigned long tmp_ulong;
+ char *opt, *orig_opt, *endp;
+
+ while ((opt = strsep(&str, ",")) != NULL) {
+ int force = 0;
+
+ orig_opt = opt;
+ if (!strncmp(opt, "force", 5)) {
+ force = 1;
+ opt += 5;
+ }
+
+ if (!strcmp(opt, "mono"))
+ gdc_can_do_color = 0;
+ else if ((tmp_ulong = simple_strtoul(opt, &endp, 0)) > 0) {
+ if (!strcmp(endp, "lines")
+ || (!strcmp(endp, "linesforce") && (force == 1))) {
+ if (!force
+ && (tmp_ulong < 20
+ || (!PC9800_9821_P()
+ && 25 < tmp_ulong)
+ || 37 < tmp_ulong))
+ printk(KERN_ERR
+ "gdccon: %d is out of bound"
+ " for number of lines\n",
+ (int)tmp_ulong);
+ else
+ gdc_video_num_lines = tmp_ulong;
+ } else if (!strcmp(endp, "kHz")) {
+ if (tmp_ulong == 24 || tmp_ulong == 25)
+ gdc_disp_freq = DISP_FREQ_25k;
+ else
+ printk(KERN_ERR "gdccon: `%s' ignored\n",
+ orig_opt);
+ } else
+ printk(KERN_ERR "gdccon: unknown option `%s'\n",
+ orig_opt);
+ } else
+ printk(KERN_ERR "gdccon: unknown option `%s'\n",
+ orig_opt);
+ }
+
+ return 1;
+}
+
+__setup("gdccon=", gdc_setup);
+
+/*
+ * We will follow Linus's indenting style...
+ *
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */