-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello list,
Today I've tried to get my infrared synchronisation to my palm pilot working.
Unfortunately, it doesn't work - I get nothing at all. It worked fine under
2.4.20.
The modules in question are irda, ircomm and ircomm_tty.
Upon load of the modules, this is shown in the logs:
IrCOMM protocol (Dag Brattli)
Module ircomm_tty cannot be unloaded due to unsafe usage in
include/linux/module.h:457
ircomm_tty_attach_cable()
ircomm_tty_ias_register()
ircomm_tty_close()
ircomm_tty_shutdown()
ircomm_tty_detach_cable()
ircomm_close()
And that's all. I cannot open /dev/ircomm0 or ircomm1, which are:
laptop:/usr/src/linux/net/irda/ircomm# ls -l /dev/ircomm*
crw-rw---- 1 root dialout 161, 0 Dec 16 14:34 /dev/ircomm0
crw-rw---- 1 root dialout 161, 1 Dec 16 14:34 /dev/ircomm1
Any ideas what i can try?
Thanks!
Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+tlsGpuyeqyCEh60RAtT6AJ0Zk6OtrGusNclRDCUaW+WUns+W/gCeJIGT
/HSsVfdmKWay1z29zJG5xzE=
=CRAC
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Monday 05 May 2003 14:37, DevilKin wrote:
> Hello list,
>
> Today I've tried to get my infrared synchronisation to my palm pilot
> working. Unfortunately, it doesn't work - I get nothing at all. It worked
> fine under 2.4.20.
>
> The modules in question are irda, ircomm and ircomm_tty.
>
> Upon load of the modules, this is shown in the logs:
>
> IrCOMM protocol (Dag Brattli)
> Module ircomm_tty cannot be unloaded due to unsafe usage in
> include/linux/module.h:457
> ircomm_tty_attach_cable()
> ircomm_tty_ias_register()
> ircomm_tty_close()
> ircomm_tty_shutdown()
> ircomm_tty_detach_cable()
> ircomm_close()
>
> And that's all. I cannot open /dev/ircomm0 or ircomm1, which are:
>
> laptop:/usr/src/linux/net/irda/ircomm# ls -l /dev/ircomm*
> crw-rw---- 1 root dialout 161, 0 Dec 16 14:34 /dev/ircomm0
> crw-rw---- 1 root dialout 161, 1 Dec 16 14:34 /dev/ircomm1
>
Furthermore, I forgot to add this:
laptop:/home/devilkin# findchip -v
Found SMC FDC37N958FR Controller at 0x3f0, DevID=0x01, Rev. 1
SIR Base 0x2f8, FIR Base 0x280
IRQ = 3, DMA = 4
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 3 us
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m
Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+tl3zpuyeqyCEh60RAimgAJwKhpL6VIB23/LNgo6ba8/bvCkC6wCeNTsJ
0jbz0gZfeybqHy5NT2obsgY=
=x/Ml
-----END PGP SIGNATURE-----