Hello,
just wanted to inform you that the DVD writing in last 2.5 still don't
work :-(
Cdrecord-ProDVD-Clone 2.01a11 (i586-pc-linux-gnu) Copyright (C) 1995-2003 J?rg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-500A '
Revision : '2.0e'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 4718592 = 4608 KB
FIFO size : 67108864 = 65536 KB
Track 01: data 2137 MB
Total size: 2137 MB = 1094395 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1204101
Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds. 0.46% done, estimate finish Sat May 10 12:25:02 2003
0.91% done, estimate finish Sat May 10 12:23:13 2003
1.37% done, estimate finish Sat May 10 12:22:36 2003
1.83% done, estimate finish Sat May 10 12:22:18 2003
2.29% done, estimate finish Sat May 10 12:22:07 2003
2.74% done, estimate finish Sat May 10 12:22:00 2003
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 4 of 2137 MB written (fifo 99%) [buf 92%] 15.9x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 08 B8 00 00 1F 00
status: 0x1 (GOOD STATUS)
resid: 63488
cmd finished after 0.008s timeout 100s
write track data: error after 4571136 bytes
cdrecord-prodvd: A write error occured.
cdrecord-prodvd: Please properly read the error message above.
cdrecord-prodvd: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x1 (GOOD STATUS)
cmd finished after 0.004s timeout 100s
Writing time: 5.266s
Average write speed 309.2x.
Fixating...
Fixating time: 77.101s
cdrecord-prodvd: fifo had 1095 puts and 73 gets.
cdrecord-prodvd: fifo was 0 times empty and 11 times full, min fill was 99%.
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]