Looked at fixing this, but it seems pretty messed up. 8)
drivers/ide/idedriver.o(.text+0x2): In function `ide_match_hwif':
: undefined reference to `ide_hwifs'
drivers/ide/idedriver.o(.text+0x7): In function `ide_match_hwif':
: undefined reference to `ide_hwifs'
drivers/ide/idedriver.o(.text+0x35): In function `ide_match_hwif':
: undefined reference to `ide_hwifs'
drivers/ide/idedriver.o(.text+0x59): In function `ide_match_hwif':
: undefined reference to `ide_hwifs'
drivers/ide/idedriver.o(.text+0x5e): In function `ide_match_hwif':
: undefined reference to `ide_hwifs'
drivers/ide/idedriver.o(.text+0x84): more undefined references to `ide_hwifs' follow
drivers/ide/idedriver.o(.text+0x7f5): In function `ide_setup_pci_controller':
: undefined reference to `noautodma'
drivers/ide/idedriver.o(.text+0x178e): In function `__ide_dma_off_quietly':
: undefined reference to `ide_toggle_bounce'
drivers/ide/idedriver.o(.text+0x188e): In function `__ide_dma_on':
: undefined reference to `ide_toggle_bounce'
drivers/ide/idedriver.o(.text+0x19c2): In function `__ide_dma_read':
: undefined reference to `ide_execute_command'
drivers/ide/idedriver.o(.text+0x1af2): In function `__ide_dma_write':
: undefined reference to `ide_execute_command'
drivers/ide/idedriver.o(.text+0x1dfd): In function `__ide_dma_verbose':
: undefined reference to `eighty_ninty_three'
make: *** [vmlinux] Error 1
Compilation exited abnormally with code 2 at Fri May 9 16:18:28
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_F00F_WORKS_OK=y
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHIO=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_X86_NUMA is not set
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y
#
# General setup
#
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_PM is not set
# CONFIG_ACPI is not set
# CONFIG_APM is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_LVM=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
# CONFIG_NETFILTER is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_ADMA100 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_SVWKS=m
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_ETHERTAP=m
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
#
# Input core support is needed for gameports
#
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_FRAME_POINTER is not set
#
# Library routines
#
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
This is the patch I sent marcelo just after rc1 was released, I gues
it will still apply..
--- 1.26/drivers/ide/Config.in Tue Mar 11 14:29:21 2003
+++ edited/drivers/ide/Config.in Wed Apr 23 17:02:53 2003
@@ -43,40 +43,42 @@
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
# dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
- dep_tristate ' Pacific Digital ADMA-100 basic support' CONFIG_BLK_DEV_ADMA100
- dep_tristate ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' Pacific Digital ADMA-100 basic support' CONFIG_BLK_DEV_ADMA100 $CONFIG_BLK_DEV_IDE
+ dep_tristate ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
- dep_tristate ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_mbool ' AMD Viper ATA-66 Override' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX
- dep_tristate ' CMD64{3|6|8|9} chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Compaq Triflex IDE support' CONFIG_BLK_DEV_TRIFLEX $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
+
+ dep_tristate ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDE
+
+ dep_mbool ' AMD Viper ATA-66 Override' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDE
+ dep_tristate ' CMD64{3|6|8|9} chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Compaq Triflex IDE support' CONFIG_BLK_DEV_TRIFLEX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
- dep_tristate ' HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
fi
- dep_tristate ' NS87415 chipset support' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
- dep_tristate ' PROMISE PDC202{46|62|65|67} support' CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' NS87415 chipset support' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_IDE
+ dep_tristate ' PROMISE PDC202{46|62|65|67} support' CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD $CONFI_BLK_DEV_IDEDMA_PCI
- dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
# FIXME - probably wants to be one for old and for new
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX_NEW
- dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
- dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Silicon Image chipset support' CONFIG_BLK_DEV_SIIMAGE $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
- dep_tristate ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' Tekram TRM290 chipset support' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
- dep_tristate ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86 $CONFIG_BLK_DEV_IDE
+ dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Silicon Image chipset support' CONFIG_BLK_DEV_SIIMAGE $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86 $CONFIG_BLK_DEV_IDE
+ dep_tristate ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' Tekram TRM290 chipset support' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
+ dep_tristate ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDE
if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
- dep_tristate ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEPCI
+ dep_tristate ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDE
fi
fi
fi
--- 1.11/drivers/ide/Makefile Mon Mar 24 13:04:35 2003
+++ edited/drivers/ide/Makefile Wed Apr 23 17:03:34 2003
@@ -35,8 +35,12 @@
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
-obj-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
-obj-$(CONFIG_BLK_DEV_IDEDMA_PCI) += ide-dma.o
+ifeq ($(CONFIG_BLK_DEV_IDEPCI),y)
+obj-$(CONFIG_BLK_DEV_IDE) += setup-pci.o
+endif
+ifeq ($(CONFIG_BLK_DEV_IDEDMA_PCI),y)
+obj-$(CONFIG_BLK_DEV_IDE) += ide-dma.o
+endif
obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
In message <[email protected]> you write:
> This is the patch I sent marcelo just after rc1 was released, I gues
> it will still apply..
Well, it applied and fixed the compile problem.
Thanks!
Rusty.
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
> [[email protected]]
>
> This is the patch I sent marcelo just after rc1 was released, I gues
> it will still apply..
Christoph, for a fully modular IDE (.config snippet included at the
end of the post) on .21rc2 I need to apply the following patch on top
of the one you have posted. 100% untested.
--
Tomas Szepe <[email protected]>
<cut>
diff -urN a/drivers/ide/Config.in b/drivers/ide/Config.in
--- a/drivers/ide/Config.in 2003-05-10 11:27:08.000000000 +0200
+++ b/drivers/ide/Config.in 2003-05-10 12:17:49.000000000 +0200
@@ -27,8 +27,8 @@
comment 'IDE chipset support/bugfixes'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
- dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
- dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
+ dep_tristate ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
+ dep_mbool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then
bool ' PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
diff -urN a/drivers/ide/Makefile b/drivers/ide/Makefile
--- a/drivers/ide/Makefile 2003-05-10 11:27:08.000000000 +0200
+++ b/drivers/ide/Makefile 2003-05-10 11:58:22.000000000 +0200
@@ -29,7 +29,7 @@
# Core IDE code - must come before legacy
-obj-$(CONFIG_BLK_DEV_IDE) += ide-probe.o ide-geometry.o ide-iops.o ide-taskfile.o ide.o ide-lib.o ide-io.o ide-default.o
+obj-$(CONFIG_BLK_DEV_IDE) += ide-probe.o ide-geometry.o ide-iops.o ide-taskfile.o ide.o ide-lib.o ide-io.o ide-default.o ide-proc.o
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
@@ -43,11 +43,6 @@
endif
obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
-
-ifeq ($(CONFIG_BLK_DEV_IDE),y)
-obj-$(CONFIG_PROC_FS) += ide-proc.o
-endif
-
ifeq ($(CONFIG_BLK_DEV_IDE),y)
obj-y += legacy/idedriver-legacy.o
obj-y += ppc/idedriver-ppc.o
diff -urN a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
--- a/drivers/ide/ide-dma.c 2003-05-10 11:27:03.000000000 +0200
+++ b/drivers/ide/ide-dma.c 2003-05-10 12:06:34.000000000 +0200
@@ -1019,6 +1019,7 @@
return ide_release_mmio_dma(hwif);
return ide_release_iomio_dma(hwif);
}
+EXPORT_SYMBOL(ide_release_dma);
int ide_allocate_dma_engine (ide_hwif_t *hwif)
{
diff -urN a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
--- a/drivers/ide/ide-io.c 2003-05-10 11:27:03.000000000 +0200
+++ b/drivers/ide/ide-io.c 2003-05-10 12:00:36.000000000 +0200
@@ -895,6 +895,7 @@
{
ide_do_request(q->queuedata, IDE_NO_IRQ);
}
+EXPORT_SYMBOL(do_ide_request);
/*
* un-busy the hwgroup etc, and clear any pending DMA status. we want to
diff -urN a/drivers/ide/ide.c b/drivers/ide/ide.c
--- a/drivers/ide/ide.c 2003-05-10 11:27:03.000000000 +0200
+++ b/drivers/ide/ide.c 2003-05-10 12:05:44.000000000 +0200
@@ -188,6 +188,7 @@
*/
ide_module_t *ide_chipsets;
ide_module_t *ide_modules;
+EXPORT_SYMBOL(ide_modules);
ide_module_t *ide_probe;
/*
@@ -597,6 +598,7 @@
{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
{ NULL, 0, NULL, NULL }
};
+EXPORT_SYMBOL(generic_subdriver_entries);
#endif
@@ -1178,6 +1180,7 @@
}
return setting;
}
+EXPORT_SYMBOL(ide_find_setting_by_name);
/**
* auto_remove_settings - remove driver specific settings
@@ -1238,6 +1241,7 @@
}
return val;
}
+EXPORT_SYMBOL(ide_read_setting);
int ide_spin_wait_hwgroup (ide_drive_t *drive)
{
@@ -1411,6 +1415,7 @@
ide_add_setting(drive, "ide-scsi", SETTING_RW, -1, HDIO_SET_IDE_SCSI, TYPE_BYTE, 0, 1, 1, 1, &drive->scsi, ide_atapi_to_scsi);
#endif
}
+EXPORT_SYMBOL(ide_add_generic_settings);
/*
* Delay for *at least* 50ms. As we don't know how much time is left
diff -urN a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
--- a/drivers/ide/setup-pci.c 2003-05-10 11:27:03.000000000 +0200
+++ b/drivers/ide/setup-pci.c 2003-05-10 12:14:35.000000000 +0200
@@ -830,3 +830,4 @@
pci_register_driver(d);
}
}
+EXPORT_SYMBOL(ide_scan_pcibus);
<cut>
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# IDE chipset support/bugfixes
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA100=m
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_AMD74XX_OVERRIDE is not set
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=m
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_BLK_DEV_ATARAID=m
CONFIG_BLK_DEV_ATARAID_PDC=m
CONFIG_BLK_DEV_ATARAID_HPT=m
CONFIG_BLK_DEV_ATARAID_SII=m
> [[email protected]]
>
> > [[email protected]]
> >
> > This is the patch I sent marcelo just after rc1 was released, I gues
> > it will still apply..
>
> Christoph, for a fully modular IDE (.config snippet included at the
> end of the post) on .21rc2 I need to apply the following patch on top
> of the one you have posted. 100% untested.
This is still not enough. pci-*.o objects will need to be linked
into a single ide.o module. I'm leaving that up to somebody else. :)
--
Tomas Szepe <[email protected]>
> [[email protected]]
>
> > [[email protected]]
> >
> > > [[email protected]]
> > >
> > > This is the patch I sent marcelo just after rc1 was released, I gues
> > > it will still apply..
> >
> > Christoph, for a fully modular IDE (.config snippet included at the
> > end of the post) on .21rc2 I need to apply the following patch on top
> > of the one you have posted. 100% untested.
>
> This is still not enough. pci-*.o objects will need to be linked
> into a single ide.o module. I'm leaving that up to somebody else. :)
s/pci-/ide-/ of course.
On Sad, 2003-05-10 at 11:26, Tomas Szepe wrote:
> > [[email protected]]
> >
> > This is the patch I sent marcelo just after rc1 was released, I gues
> > it will still apply..
>
> Christoph, for a fully modular IDE (.config snippet included at the
> end of the post) on .21rc2 I need to apply the following patch on top
> of the one you have posted. 100% untested.
Second problem - your export hacks create a dependancy loop for the modules
you have to link them together not do ugly export hacks (which btw should
also be _GPL)
On Sad, 2003-05-10 at 11:26, Tomas Szepe wrote:
> > [[email protected]]
> >
> > This is the patch I sent marcelo just after rc1 was released, I gues
> > it will still apply..
>
> Christoph, for a fully modular IDE (.config snippet included at the
> end of the post) on .21rc2 I need to apply the following patch on top
You can't have CMD640 support modular. The bool is intentional
> [[email protected]]
>
> On Sad, 2003-05-10 at 11:26, Tomas Szepe wrote:
> > > [[email protected]]
> > >
> > > This is the patch I sent marcelo just after rc1 was released, I gues
> > > it will still apply..
> >
> > Christoph, for a fully modular IDE (.config snippet included at the
> > end of the post) on .21rc2 I need to apply the following patch on top
> > of the one you have posted. 100% untested.
>
> You can't have CMD640 support modular. The bool is intentional.
>
> Second problem - your export hacks create a dependancy loop for the modules
> you have to link them together not do ugly export hacks (which btw should
> also be _GPL)
Okay, let me try again, this time with brains_enable set to 1. 8)
The patch (against 2.4.21-rc2-ac1) is rather large, because it
o moves cmd640.c from drivers/ide/pci to drivers/ide, and
o deletes cmd640.h as it is no longer used.
I'm sure the patch is far from perfect yet (esp. what I did to
ide-default.c isn't nice at all -- I couldn't see why the object
was meant to be a module, or maybe I just got lost in untangling the
reference loops), the result, however, seems to work (for a change).
The patch also contains a fix to what I reckon might be a trivial
bug -- search for "-1513,9".
--
Tomas Szepe <[email protected]>
diff -urN a/drivers/ide/Makefile b/drivers/ide/Makefile
--- a/drivers/ide/Makefile 2003-05-11 15:50:14.000000000 +0200
+++ b/drivers/ide/Makefile 2003-05-11 16:33:00.000000000 +0200
@@ -8,18 +8,21 @@
# In the future, some of these should be built conditionally.
#
-O_TARGET := idedriver.o
+O_TARGET := idedriver.o
-export-objs := ide-iops.o ide-taskfile.o ide-proc.o ide.o ide-probe.o ide-dma.o ide-lib.o setup-pci.o ide-io.o ide-disk.o
+export-objs := ide-iops.o ide-taskfile.o ide-proc.o ide.o \
+ ide-probe.o ide-dma.o ide-lib.o setup-pci.o \
+ ide-io.o ide-disk.o
+
+list-multi := ide-mod.o ide-probe-mod.o
all-subdirs := arm legacy pci ppc raid
mod-subdirs := arm legacy pci ppc raid
obj-y :=
obj-m :=
-ide-obj-y :=
-subdir-$(CONFIG_BLK_DEV_IDE) += legacy ppc arm raid pci
+subdir-$(CONFIG_BLK_DEV_IDE) += legacy ppc arm raid pci
# First come modules that register themselves with the core
@@ -29,24 +32,12 @@
# Core IDE code - must come before legacy
-obj-$(CONFIG_BLK_DEV_IDE) += ide-probe.o ide-geometry.o ide-iops.o ide-taskfile.o ide.o ide-lib.o ide-io.o ide-default.o
-obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
-obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
-obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
-obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
-
-ifeq ($(CONFIG_BLK_DEV_IDEPCI),y)
-obj-$(CONFIG_BLK_DEV_IDE) += setup-pci.o
-endif
-ifeq ($(CONFIG_BLK_DEV_IDEDMA_PCI),y)
-obj-$(CONFIG_BLK_DEV_IDE) += ide-dma.o
-endif
-obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
-
-
-ifeq ($(CONFIG_BLK_DEV_IDE),y)
-obj-$(CONFIG_PROC_FS) += ide-proc.o
-endif
+obj-$(CONFIG_BLK_DEV_IDE) += ide-mod.o ide-probe-mod.o
+obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
+obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
+obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
+obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
+obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
ifeq ($(CONFIG_BLK_DEV_IDE),y)
obj-y += legacy/idedriver-legacy.o
@@ -54,14 +45,35 @@
obj-y += arm/idedriver-arm.o
else
ifeq ($(CONFIG_BLK_DEV_HD_ONLY),y)
- obj-y += legacy/idedriver-legacy.o
+ obj-y += legacy/idedriver-legacy.o
endif
endif
-
-ifeq ($(CONFIG_BLK_DEV_IDE),y)
# RAID must be last of all
+ifeq ($(CONFIG_BLK_DEV_IDE),y)
obj-y += raid/idedriver-raid.o
endif
+ide-mod-objs := ide-iops.o ide-taskfile.o ide.o ide-lib.o \
+ ide-proc.o ide-io.o ide-default.o
+ide-probe-mod-objs := ide-probe.o ide-geometry.o
+
+ifeq ($(CONFIG_BLK_DEV_IDEPCI),y)
+ ide-mod-objs += setup-pci.o
+endif
+
+ifeq ($(CONFIG_BLK_DEV_IDEDMA_PCI),y)
+ ide-mod-objs += ide-dma.o
+endif
+
+ifeq ($(CONFIG_BLK_DEV_CMD640),y)
+ ide-mod-objs += cmd640.o
+endif
+
include $(TOPDIR)/Rules.make
+
+ide-mod.o: $(ide-mod-objs)
+ $(LD) -r -o $@ $(ide-mod-objs)
+
+ide-probe-mod.o: $(ide-probe-mod-objs)
+ $(LD) -r -o $@ $(ide-probe-mod-objs)
diff -urN a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
--- a/drivers/ide/cmd640.c 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/ide/cmd640.c 2003-05-11 16:10:02.000000000 +0200
@@ -0,0 +1,879 @@
+/*
+ * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
+ *
+ * Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
+ */
+
+/*
+ * Original authors: [email protected] (Igor Abramov)
+ * [email protected] (Mark Lord)
+ *
+ * See linux/MAINTAINERS for address of current maintainer.
+ *
+ * This file provides support for the advanced features and bugs
+ * of IDE interfaces using the CMD Technologies 0640 IDE interface chip.
+ *
+ * These chips are basically fucked by design, and getting this driver
+ * to work on every motherboard design that uses this screwed chip seems
+ * bloody well impossible. However, we're still trying.
+ *
+ * Version 0.97 worked for everybody.
+ *
+ * User feedback is essential. Many thanks to the beta test team:
+ *
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected],
+ * [email protected], [email protected],
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected], [email protected],
+ * [email protected], [email protected], [email protected], [email protected]
+ * [email protected], and others.
+ *
+ * Version 0.01 Initial version, hacked out of ide.c,
+ * and #include'd rather than compiled separately.
+ * This will get cleaned up in a subsequent release.
+ *
+ * Version 0.02 Fixes for vlb initialization code, enable prefetch
+ * for versions 'B' and 'C' of chip by default,
+ * some code cleanup.
+ *
+ * Version 0.03 Added reset of secondary interface,
+ * and black list for devices which are not compatible
+ * with prefetch mode. Separate function for setting
+ * prefetch is added, possibly it will be called some
+ * day from ioctl processing code.
+ *
+ * Version 0.04 Now configs/compiles separate from ide.c
+ *
+ * Version 0.05 Major rewrite of interface timing code.
+ * Added new function cmd640_set_mode to set PIO mode
+ * from ioctl call. New drives added to black list.
+ *
+ * Version 0.06 More code cleanup. Prefetch is enabled only for
+ * detected hard drives, not included in prefetch
+ * black list.
+ *
+ * Version 0.07 Changed to more conservative drive tuning policy.
+ * Unknown drives, which report PIO < 4 are set to
+ * (reported_PIO - 1) if it is supported, or to PIO0.
+ * List of known drives extended by info provided by
+ * CMD at their ftp site.
+ *
+ * Version 0.08 Added autotune/noautotune support.
+ *
+ * Version 0.09 Try to be smarter about 2nd port enabling.
+ * Version 0.10 Be nice and don't reset 2nd port.
+ * Version 0.11 Try to handle more weird situations.
+ *
+ * Version 0.12 Lots of bug fixes from Laszlo Peter
+ * irq unmasking disabled for reliability.
+ * try to be even smarter about the second port.
+ * tidy up source code formatting.
+ * Version 0.13 permit irq unmasking again.
+ * Version 0.90 massive code cleanup, some bugs fixed.
+ * defaults all drives to PIO mode0, prefetch off.
+ * autotune is OFF by default, with compile time flag.
+ * prefetch can be turned OFF/ON using "hdparm -p8/-p9"
+ * (requires hdparm-3.1 or newer)
+ * Version 0.91 first release to linux-kernel list.
+ * Version 0.92 move initial reg dump to separate callable function
+ * change "readahead" to "prefetch" to avoid confusion
+ * Version 0.95 respect original BIOS timings unless autotuning.
+ * tons of code cleanup and rearrangement.
+ * added CONFIG_BLK_DEV_CMD640_ENHANCED option
+ * prevent use of unmask when prefetch is on
+ * Version 0.96 prevent use of io_32bit when prefetch is off
+ * Version 0.97 fix VLB secondary interface for [email protected]
+ * other minor tune-ups: 0.96 was very good.
+ * Version 0.98 ignore PCI version when disabled by BIOS
+ * Version 0.99 display setup/active/recovery clocks with PIO mode
+ * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems
+ * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7"
+ * ("fast" is necessary for 32bit I/O in some systems)
+ * Version 1.02 fix bug that resulted in slow "setup times"
+ * (patch courtesy of Zoltan Hidvegi)
+ */
+
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+#define CMD640_PREFETCH_MASKS 1
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#include "ide_modes.h"
+
+/*
+ * This flag is set in ide.c by the parameter: ide0=cmd640_vlb
+ */
+int cmd640_vlb = 0;
+
+/*
+ * CMD640 specific registers definition.
+ */
+
+#define VID 0x00
+#define DID 0x02
+#define PCMD 0x04
+#define PCMD_ENA 0x01
+#define PSTTS 0x06
+#define REVID 0x08
+#define PROGIF 0x09
+#define SUBCL 0x0a
+#define BASCL 0x0b
+#define BaseA0 0x10
+#define BaseA1 0x14
+#define BaseA2 0x18
+#define BaseA3 0x1c
+#define INTLINE 0x3c
+#define INPINE 0x3d
+
+#define CFR 0x50
+#define CFR_DEVREV 0x03
+#define CFR_IDE01INTR 0x04
+#define CFR_DEVID 0x18
+#define CFR_AT_VESA_078h 0x20
+#define CFR_DSA1 0x40
+#define CFR_DSA0 0x80
+
+#define CNTRL 0x51
+#define CNTRL_DIS_RA0 0x40
+#define CNTRL_DIS_RA1 0x80
+#define CNTRL_ENA_2ND 0x08
+
+#define CMDTIM 0x52
+#define ARTTIM0 0x53
+#define DRWTIM0 0x54
+#define ARTTIM1 0x55
+#define DRWTIM1 0x56
+#define ARTTIM23 0x57
+#define ARTTIM23_DIS_RA2 0x04
+#define ARTTIM23_DIS_RA3 0x08
+#define DRWTIM23 0x58
+#define BRST 0x59
+
+/*
+ * Registers and masks for easy access by drive index:
+ */
+static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
+static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
+
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+
+static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
+static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
+
+/*
+ * Current cmd640 timing values for each drive.
+ * The defaults for each are the slowest possible timings.
+ */
+static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
+static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
+static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
+
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+/*
+ * These are initialized to point at the devices we control
+ */
+static ide_hwif_t *cmd_hwif0, *cmd_hwif1;
+static ide_drive_t *cmd_drives[4];
+
+/*
+ * Interface to access cmd640x registers
+ */
+static unsigned int cmd640_key;
+static void (*__put_cmd640_reg)(u16 reg, u8 val);
+static u8 (*__get_cmd640_reg)(u16 reg);
+
+/*
+ * This is read from the CFR reg, and is used in several places.
+ */
+static unsigned int cmd640_chip_version;
+
+/*
+ * The CMD640x chip does not support DWORD config write cycles, but some
+ * of the BIOSes use them to implement the config services.
+ * Therefore, we must use direct IO instead.
+ */
+
+/* PCI method 1 access */
+
+static void put_cmd640_reg_pci1 (u16 reg, u8 val)
+{
+ outb_p((reg & 0xfc) | cmd640_key, 0xcf8);
+ outb_p(val, (reg & 3) | 0xcfc);
+}
+
+static u8 get_cmd640_reg_pci1 (u16 reg)
+{
+ outb_p((reg & 0xfc) | cmd640_key, 0xcf8);
+ return inb_p((reg & 3) | 0xcfc);
+}
+
+/* PCI method 2 access (from CMD datasheet) */
+
+static void put_cmd640_reg_pci2 (u16 reg, u8 val)
+{
+ outb_p(0x10, 0xcf8);
+ outb_p(val, cmd640_key + reg);
+ outb_p(0, 0xcf8);
+}
+
+static u8 get_cmd640_reg_pci2 (u16 reg)
+{
+ u8 b;
+
+ outb_p(0x10, 0xcf8);
+ b = inb_p(cmd640_key + reg);
+ outb_p(0, 0xcf8);
+ return b;
+}
+
+/* VLB access */
+
+static void put_cmd640_reg_vlb (u16 reg, u8 val)
+{
+ outb_p(reg, cmd640_key);
+ outb_p(val, cmd640_key + 4);
+}
+
+static u8 get_cmd640_reg_vlb (u16 reg)
+{
+ outb_p(reg, cmd640_key);
+ return inb_p(cmd640_key + 4);
+}
+
+static u8 get_cmd640_reg(u16 reg)
+{
+ u8 b;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ b = __get_cmd640_reg(reg);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return b;
+}
+
+static void put_cmd640_reg(u16 reg, u8 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ __put_cmd640_reg(reg,val);
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+static int __init match_pci_cmd640_device (void)
+{
+ const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
+ unsigned int i;
+ for (i = 0; i < 4; i++) {
+ if (get_cmd640_reg(i) != ven_dev[i])
+ return 0;
+ }
+#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
+ if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
+ printk("ide: cmd640 on PCI disabled by BIOS\n");
+ return 0;
+ }
+#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
+ return 1; /* success */
+}
+
+/*
+ * Probe for CMD640x -- pci method 1
+ */
+static int __init probe_for_cmd640_pci1 (void)
+{
+ __get_cmd640_reg = get_cmd640_reg_pci1;
+ __put_cmd640_reg = put_cmd640_reg_pci1;
+ for (cmd640_key = 0x80000000;
+ cmd640_key <= 0x8000f800;
+ cmd640_key += 0x800) {
+ if (match_pci_cmd640_device())
+ return 1; /* success */
+ }
+ return 0;
+}
+
+/*
+ * Probe for CMD640x -- pci method 2
+ */
+static int __init probe_for_cmd640_pci2 (void)
+{
+ __get_cmd640_reg = get_cmd640_reg_pci2;
+ __put_cmd640_reg = put_cmd640_reg_pci2;
+ for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {
+ if (match_pci_cmd640_device())
+ return 1; /* success */
+ }
+ return 0;
+}
+
+/*
+ * Probe for CMD640x -- vlb
+ */
+static int __init probe_for_cmd640_vlb (void)
+{
+ u8 b;
+
+ __get_cmd640_reg = get_cmd640_reg_vlb;
+ __put_cmd640_reg = put_cmd640_reg_vlb;
+ cmd640_key = 0x178;
+ b = get_cmd640_reg(CFR);
+ if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
+ cmd640_key = 0x78;
+ b = get_cmd640_reg(CFR);
+ if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
+ return 0;
+ }
+ return 1; /* success */
+}
+
+/*
+ * Returns 1 if an IDE interface/drive exists at 0x170,
+ * Returns 0 otherwise.
+ */
+static int __init secondary_port_responding (void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */
+ udelay(100);
+ if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) {
+ outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */
+ udelay(100);
+ if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) {
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return 0; /* nothing responded */
+ }
+ }
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return 1; /* success */
+}
+
+#ifdef CMD640_DUMP_REGS
+/*
+ * Dump out all cmd640 registers. May be called from ide.c
+ */
+static void cmd640_dump_regs (void)
+{
+ unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
+
+ /* Dump current state of chip registers */
+ printk("ide: cmd640 internal register dump:");
+ for (; reg <= 0x59; reg++) {
+ if (!(reg & 0x0f))
+ printk("\n%04x:", reg);
+ printk(" %02x", get_cmd640_reg(reg));
+ }
+ printk("\n");
+}
+#endif
+
+/*
+ * Check whether prefetch is on for a drive,
+ * and initialize the unmask flags for safe operation.
+ */
+static void __init check_prefetch (unsigned int index)
+{
+ ide_drive_t *drive = cmd_drives[index];
+ u8 b = get_cmd640_reg(prefetch_regs[index]);
+
+ if (b & prefetch_masks[index]) { /* is prefetch off? */
+ drive->no_unmask = 0;
+ drive->no_io_32bit = 1;
+ drive->io_32bit = 0;
+ } else {
+#if CMD640_PREFETCH_MASKS
+ drive->no_unmask = 1;
+ drive->unmask = 0;
+#endif
+ drive->no_io_32bit = 0;
+ }
+}
+
+/*
+ * Figure out which devices we control
+ */
+static void __init setup_device_ptrs (void)
+{
+ unsigned int i;
+
+ cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */
+ cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */
+ for (i = 0; i < MAX_HWIFS; i++) {
+ ide_hwif_t *hwif = &ide_hwifs[i];
+ if (hwif->chipset == ide_unknown || hwif->chipset == ide_generic) {
+ if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0)
+ cmd_hwif0 = hwif;
+ else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170)
+ cmd_hwif1 = hwif;
+ }
+ }
+ cmd_drives[0] = &cmd_hwif0->drives[0];
+ cmd_drives[1] = &cmd_hwif0->drives[1];
+ cmd_drives[2] = &cmd_hwif1->drives[0];
+ cmd_drives[3] = &cmd_hwif1->drives[1];
+}
+
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+
+/*
+ * Sets prefetch mode for a drive.
+ */
+static void set_prefetch_mode (unsigned int index, int mode)
+{
+ ide_drive_t *drive = cmd_drives[index];
+ int reg = prefetch_regs[index];
+ u8 b;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ b = __get_cmd640_reg(reg);
+ if (mode) { /* want prefetch on? */
+#if CMD640_PREFETCH_MASKS
+ drive->no_unmask = 1;
+ drive->unmask = 0;
+#endif
+ drive->no_io_32bit = 0;
+ b &= ~prefetch_masks[index]; /* enable prefetch */
+ } else {
+ drive->no_unmask = 0;
+ drive->no_io_32bit = 1;
+ drive->io_32bit = 0;
+ b |= prefetch_masks[index]; /* disable prefetch */
+ }
+ __put_cmd640_reg(reg, b);
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+/*
+ * Dump out current drive clocks settings
+ */
+static void display_clocks (unsigned int index)
+{
+ u8 active_count, recovery_count;
+
+ active_count = active_counts[index];
+ if (active_count == 1)
+ ++active_count;
+ recovery_count = recovery_counts[index];
+ if (active_count > 3 && recovery_count == 1)
+ ++recovery_count;
+ if (cmd640_chip_version > 1)
+ recovery_count += 1; /* cmd640b uses (count + 1)*/
+ printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);
+}
+
+/*
+ * Pack active and recovery counts into single byte representation
+ * used by controller
+ */
+inline static u8 pack_nibbles (u8 upper, u8 lower)
+{
+ return ((upper & 0x0f) << 4) | (lower & 0x0f);
+}
+
+/*
+ * This routine retrieves the initial drive timings from the chipset.
+ */
+static void __init retrieve_drive_counts (unsigned int index)
+{
+ u8 b;
+
+ /*
+ * Get the internal setup timing, and convert to clock count
+ */
+ b = get_cmd640_reg(arttim_regs[index]) & ~0x3f;
+ switch (b) {
+ case 0x00: b = 4; break;
+ case 0x80: b = 3; break;
+ case 0x40: b = 2; break;
+ default: b = 5; break;
+ }
+ setup_counts[index] = b;
+
+ /*
+ * Get the active/recovery counts
+ */
+ b = get_cmd640_reg(drwtim_regs[index]);
+ active_counts[index] = (b >> 4) ? (b >> 4) : 0x10;
+ recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10;
+}
+
+
+/*
+ * This routine writes the prepared setup/active/recovery counts
+ * for a drive into the cmd640 chipset registers to active them.
+ */
+static void program_drive_counts (unsigned int index)
+{
+ unsigned long flags;
+ u8 setup_count = setup_counts[index];
+ u8 active_count = active_counts[index];
+ u8 recovery_count = recovery_counts[index];
+
+ /*
+ * Set up address setup count and drive read/write timing registers.
+ * Primary interface has individual count/timing registers for
+ * each drive. Secondary interface has one common set of registers,
+ * so we merge the timings, using the slowest value for each timing.
+ */
+ if (index > 1) {
+ unsigned int mate;
+ if (cmd_drives[mate = index ^ 1]->present) {
+ if (setup_count < setup_counts[mate])
+ setup_count = setup_counts[mate];
+ if (active_count < active_counts[mate])
+ active_count = active_counts[mate];
+ if (recovery_count < recovery_counts[mate])
+ recovery_count = recovery_counts[mate];
+ }
+ }
+
+ /*
+ * Convert setup_count to internal chipset representation
+ */
+ switch (setup_count) {
+ case 4: setup_count = 0x00; break;
+ case 3: setup_count = 0x80; break;
+ case 1:
+ case 2: setup_count = 0x40; break;
+ default: setup_count = 0xc0; /* case 5 */
+ }
+
+ /*
+ * Now that everything is ready, program the new timings
+ */
+ spin_lock_irqsave(&ide_lock, flags);
+ /*
+ * Program the address_setup clocks into ARTTIM reg,
+ * and then the active/recovery counts into the DRWTIM reg
+ * (this converts counts of 16 into counts of zero -- okay).
+ */
+ setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
+ __put_cmd640_reg(arttim_regs[index], setup_count);
+ __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count));
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+/*
+ * Set a specific pio_mode for a drive
+ */
+static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time)
+{
+ int setup_time, active_time, recovery_time, clock_time;
+ u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
+ int bus_speed = system_bus_clock();
+
+ if (pio_mode > 5)
+ pio_mode = 5;
+ setup_time = ide_pio_timings[pio_mode].setup_time;
+ active_time = ide_pio_timings[pio_mode].active_time;
+ recovery_time = cycle_time - (setup_time + active_time);
+ clock_time = 1000 / bus_speed;
+ cycle_count = (cycle_time + clock_time - 1) / clock_time;
+
+ setup_count = (setup_time + clock_time - 1) / clock_time;
+
+ active_count = (active_time + clock_time - 1) / clock_time;
+ if (active_count < 2)
+ active_count = 2; /* minimum allowed by cmd640 */
+
+ recovery_count = (recovery_time + clock_time - 1) / clock_time;
+ recovery_count2 = cycle_count - (setup_count + active_count);
+ if (recovery_count2 > recovery_count)
+ recovery_count = recovery_count2;
+ if (recovery_count < 2)
+ recovery_count = 2; /* minimum allowed by cmd640 */
+ if (recovery_count > 17) {
+ active_count += recovery_count - 17;
+ recovery_count = 17;
+ }
+ if (active_count > 16)
+ active_count = 16; /* maximum allowed by cmd640 */
+ if (cmd640_chip_version > 1)
+ recovery_count -= 1; /* cmd640b uses (count + 1)*/
+ if (recovery_count > 16)
+ recovery_count = 16; /* maximum allowed by cmd640 */
+
+ setup_counts[index] = setup_count;
+ active_counts[index] = active_count;
+ recovery_counts[index] = recovery_count;
+
+ /*
+ * In a perfect world, we might set the drive pio mode here
+ * (using WIN_SETFEATURE) before continuing.
+ *
+ * But we do not, because:
+ * 1) this is the wrong place to do it (proper is do_special() in ide.c)
+ * 2) in practice this is rarely, if ever, necessary
+ */
+ program_drive_counts (index);
+}
+
+/*
+ * Drive PIO mode selection:
+ */
+static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
+{
+ u8 b;
+ ide_pio_data_t d;
+ unsigned int index = 0;
+
+ while (drive != cmd_drives[index]) {
+ if (++index > 3) {
+ printk("%s: bad news in cmd640_tune_drive\n", drive->name);
+ return;
+ }
+ }
+ switch (mode_wanted) {
+ case 6: /* set fast-devsel off */
+ case 7: /* set fast-devsel on */
+ mode_wanted &= 1;
+ b = get_cmd640_reg(CNTRL) & ~0x27;
+ if (mode_wanted)
+ b |= 0x27;
+ put_cmd640_reg(CNTRL, b);
+ printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
+ return;
+
+ case 8: /* set prefetch off */
+ case 9: /* set prefetch on */
+ mode_wanted &= 1;
+ set_prefetch_mode(index, mode_wanted);
+ printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
+ return;
+ }
+
+ (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
+ cmd640_set_mode (index, d.pio_mode, d.cycle_time);
+
+ printk ("%s: selected cmd640 PIO mode%d (%dns)%s",
+ drive->name,
+ d.pio_mode,
+ d.cycle_time,
+ d.overridden ? " (overriding vendor mode)" : "");
+ display_clocks(index);
+ return;
+}
+
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+static int pci_conf1(void)
+{
+ u32 tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ outb(0x01, 0xCFB);
+ tmp = inl(0xCF8);
+ outl(0x80000000, 0xCF8);
+ if (inl(0xCF8) == 0x80000000) {
+ outl(tmp, 0xCF8);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return 1;
+ }
+ outl(tmp, 0xCF8);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return 0;
+}
+
+static int pci_conf2(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ outb(0x00, 0xCFB);
+ outb(0x00, 0xCF8);
+ outb(0x00, 0xCFA);
+ if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return 1;
+ }
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return 0;
+}
+
+/*
+ * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c
+ */
+int __init ide_probe_for_cmd640x (void)
+{
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ int second_port_toggled = 0;
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ int second_port_cmd640 = 0;
+ const char *bus_type, *port2;
+ unsigned int index;
+ u8 b, cfr;
+
+ if (cmd640_vlb && probe_for_cmd640_vlb()) {
+ bus_type = "VLB";
+ } else {
+ cmd640_vlb = 0;
+ /* Find out what kind of PCI probing is supported otherwise
+ Justin Gibbs will sulk.. */
+ if (pci_conf1() && probe_for_cmd640_pci1())
+ bus_type = "PCI (type1)";
+ else if (pci_conf2() && probe_for_cmd640_pci2())
+ bus_type = "PCI (type2)";
+ else
+ return 0;
+ }
+ /*
+ * Undocumented magic (there is no 0x5b reg in specs)
+ */
+ put_cmd640_reg(0x5b, 0xbd);
+ if (get_cmd640_reg(0x5b) != 0xbd) {
+ printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n");
+ return 0;
+ }
+ put_cmd640_reg(0x5b, 0);
+
+#ifdef CMD640_DUMP_REGS
+ CMD640_DUMP_REGS;
+#endif
+
+ /*
+ * Documented magic begins here
+ */
+ cfr = get_cmd640_reg(CFR);
+ cmd640_chip_version = cfr & CFR_DEVREV;
+ if (cmd640_chip_version == 0) {
+ printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
+ return 0;
+ }
+
+ /*
+ * Initialize data for primary port
+ */
+ setup_device_ptrs ();
+ printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
+ cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
+ cmd_hwif0->chipset = ide_cmd640;
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif0->tuneproc = &cmd640_tune_drive;
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+
+ /*
+ * Ensure compatibility by always using the slowest timings
+ * for access to the drive's command register block,
+ * and reset the prefetch burstsize to default (512 bytes).
+ *
+ * Maybe we need a way to NOT do these on *some* systems?
+ */
+ put_cmd640_reg(CMDTIM, 0);
+ put_cmd640_reg(BRST, 0x40);
+
+ /*
+ * Try to enable the secondary interface, if not already enabled
+ */
+ if (cmd_hwif1->noprobe) {
+ port2 = "not probed";
+ } else {
+ b = get_cmd640_reg(CNTRL);
+ if (secondary_port_responding()) {
+ if ((b & CNTRL_ENA_2ND)) {
+ second_port_cmd640 = 1;
+ port2 = "okay";
+ } else if (cmd640_vlb) {
+ second_port_cmd640 = 1;
+ port2 = "alive";
+ } else
+ port2 = "not cmd640";
+ } else {
+ put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
+ if (secondary_port_responding()) {
+ second_port_cmd640 = 1;
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ second_port_toggled = 1;
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ port2 = "enabled";
+ } else {
+ put_cmd640_reg(CNTRL, b); /* restore original setting */
+ port2 = "not responding";
+ }
+ }
+ }
+
+ /*
+ * Initialize data for secondary cmd640 port, if enabled
+ */
+ if (second_port_cmd640) {
+ cmd_hwif0->serialized = 1;
+ cmd_hwif1->serialized = 1;
+ cmd_hwif1->chipset = ide_cmd640;
+ cmd_hwif0->mate = cmd_hwif1;
+ cmd_hwif1->mate = cmd_hwif0;
+ cmd_hwif1->channel = 1;
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif1->tuneproc = &cmd640_tune_drive;
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ }
+ printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
+ cmd_hwif0->serialized ? "" : "not ", port2);
+
+ /*
+ * Establish initial timings/prefetch for all drives.
+ * Do not unnecessarily disturb any prior BIOS setup of these.
+ */
+ for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
+ ide_drive_t *drive = cmd_drives[index];
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ if (drive->autotune || ((index > 1) && second_port_toggled)) {
+ /*
+ * Reset timing to the slowest speed and turn off prefetch.
+ * This way, the drive identify code has a better chance.
+ */
+ setup_counts [index] = 4; /* max possible */
+ active_counts [index] = 16; /* max possible */
+ recovery_counts [index] = 16; /* max possible */
+ program_drive_counts (index);
+ set_prefetch_mode (index, 0);
+ printk("cmd640: drive%d timings/prefetch cleared\n", index);
+ } else {
+ /*
+ * Record timings/prefetch without changing them.
+ * This preserves any prior BIOS setup.
+ */
+ retrieve_drive_counts (index);
+ check_prefetch (index);
+ printk("cmd640: drive%d timings/prefetch(%s) preserved",
+ index, drive->no_io_32bit ? "off" : "on");
+ display_clocks(index);
+ }
+#else
+ /*
+ * Set the drive unmask flags to match the prefetch setting
+ */
+ check_prefetch (index);
+ printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
+ index, drive->no_io_32bit ? "off" : "on");
+#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ }
+
+#ifdef CMD640_DUMP_REGS
+ CMD640_DUMP_REGS;
+#endif
+ return 1;
+}
+
diff -urN a/drivers/ide/ide-default.c b/drivers/ide/ide-default.c
--- a/drivers/ide/ide-default.c 2003-05-11 15:50:07.000000000 +0200
+++ b/drivers/ide/ide-default.c 2003-05-11 16:35:15.000000000 +0200
@@ -2,14 +2,14 @@
* ide-default - Driver for unbound ide devices
*
* This provides a clean way to bind a device to default operations
- * by having an actual driver class that rather than special casing
+ * by having an actual driver class rather than special casing
* "no driver" all over the IDE code
*
* Copyright (C) 2003, Red Hat <[email protected]>
*/
#include <linux/config.h>
-#include <linux/module.h>
+/* #include <linux/module.h> */
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
@@ -68,7 +68,7 @@
int idedefault_attach (ide_drive_t *drive)
{
int ret = 0;
- MOD_INC_USE_COUNT;
+ /* MOD_INC_USE_COUNT; */
if (ide_register_subdriver(drive,
&idedefault_driver, IDE_SUBDRIVER_VERSION)) {
printk(KERN_ERR "ide-default: %s: Failed to register the "
@@ -81,11 +81,11 @@
DRIVER(drive)->busy--;
bye_game_over:
- MOD_DEC_USE_COUNT;
+ /* MOD_DEC_USE_COUNT; */
return ret;
}
-MODULE_DESCRIPTION("IDE Default Driver");
+/* MODULE_DESCRIPTION("IDE Default Driver"); */
int idedefault_init (void)
{
@@ -93,5 +93,5 @@
return 0;
}
-module_init(idedefault_init);
-MODULE_LICENSE("GPL");
+/* module_init(idedefault_init);
+MODULE_LICENSE("GPL"); */
diff -urN a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
--- a/drivers/ide/ide-io.c 2003-05-11 15:50:07.000000000 +0200
+++ b/drivers/ide/ide-io.c 2003-05-11 16:38:14.000000000 +0200
@@ -895,6 +895,7 @@
{
ide_do_request(q->queuedata, IDE_NO_IRQ);
}
+EXPORT_SYMBOL_GPL(do_ide_request);
/*
* un-busy the hwgroup etc, and clear any pending DMA status. we want to
diff -urN a/drivers/ide/ide.c b/drivers/ide/ide.c
--- a/drivers/ide/ide.c 2003-05-11 15:50:14.000000000 +0200
+++ b/drivers/ide/ide.c 2003-05-11 16:32:43.000000000 +0200
@@ -1413,6 +1413,7 @@
ide_add_setting(drive, "ide-scsi", SETTING_RW, -1, HDIO_SET_IDE_SCSI, TYPE_BYTE, 0, 1, 1, 1, &drive->scsi, ide_atapi_to_scsi);
#endif
}
+EXPORT_SYMBOL_GPL(ide_add_generic_settings);
/*
* Delay for *at least* 50ms. As we don't know how much time is left
@@ -1513,9 +1514,11 @@
default:
{
extern int idedefault_attach(ide_drive_t *drive);
- if(idedefault_attach(drive))
+ if(idedefault_attach(drive)) {
printk(KERN_CRIT "ide: failed to attach default driver.\n");
- return 1;
+ return 1;
+ }
+ break;
}
}
return 0;
@@ -2115,7 +2118,7 @@
#ifdef CONFIG_BLK_DEV_CMD640
case -14: /* "cmd640_vlb" */
{
- extern int cmd640_vlb; /* flag for cmd640.c */
+ extern int cmd640_vlb; /* flag for cmd640.c */
cmd640_vlb = 1;
goto done;
}
@@ -2308,7 +2311,7 @@
void __init ide_init_builtin_subdrivers (void)
{
- idedefault_init();
+ (void) idedefault_init();
#ifdef CONFIG_BLK_DEV_IDEDISK
(void) idedisk_init();
#endif /* CONFIG_BLK_DEV_IDEDISK */
diff -urN a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
--- a/drivers/ide/pci/Makefile 2003-05-11 15:50:07.000000000 +0200
+++ b/drivers/ide/pci/Makefile 2003-05-11 16:07:36.000000000 +0200
@@ -8,7 +8,6 @@
obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
-obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o
obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
diff -urN a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
--- a/drivers/ide/pci/cmd640.c 2003-05-11 15:50:07.000000000 +0200
+++ b/drivers/ide/pci/cmd640.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,879 +0,0 @@
-/*
- * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
- *
- * Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
- */
-
-/*
- * Original authors: [email protected] (Igor Abramov)
- * [email protected] (Mark Lord)
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This file provides support for the advanced features and bugs
- * of IDE interfaces using the CMD Technologies 0640 IDE interface chip.
- *
- * These chips are basically fucked by design, and getting this driver
- * to work on every motherboard design that uses this screwed chip seems
- * bloody well impossible. However, we're still trying.
- *
- * Version 0.97 worked for everybody.
- *
- * User feedback is essential. Many thanks to the beta test team:
- *
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected],
- * [email protected], [email protected],
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected], [email protected],
- * [email protected], [email protected], [email protected], [email protected]
- * [email protected], and others.
- *
- * Version 0.01 Initial version, hacked out of ide.c,
- * and #include'd rather than compiled separately.
- * This will get cleaned up in a subsequent release.
- *
- * Version 0.02 Fixes for vlb initialization code, enable prefetch
- * for versions 'B' and 'C' of chip by default,
- * some code cleanup.
- *
- * Version 0.03 Added reset of secondary interface,
- * and black list for devices which are not compatible
- * with prefetch mode. Separate function for setting
- * prefetch is added, possibly it will be called some
- * day from ioctl processing code.
- *
- * Version 0.04 Now configs/compiles separate from ide.c
- *
- * Version 0.05 Major rewrite of interface timing code.
- * Added new function cmd640_set_mode to set PIO mode
- * from ioctl call. New drives added to black list.
- *
- * Version 0.06 More code cleanup. Prefetch is enabled only for
- * detected hard drives, not included in prefetch
- * black list.
- *
- * Version 0.07 Changed to more conservative drive tuning policy.
- * Unknown drives, which report PIO < 4 are set to
- * (reported_PIO - 1) if it is supported, or to PIO0.
- * List of known drives extended by info provided by
- * CMD at their ftp site.
- *
- * Version 0.08 Added autotune/noautotune support.
- *
- * Version 0.09 Try to be smarter about 2nd port enabling.
- * Version 0.10 Be nice and don't reset 2nd port.
- * Version 0.11 Try to handle more weird situations.
- *
- * Version 0.12 Lots of bug fixes from Laszlo Peter
- * irq unmasking disabled for reliability.
- * try to be even smarter about the second port.
- * tidy up source code formatting.
- * Version 0.13 permit irq unmasking again.
- * Version 0.90 massive code cleanup, some bugs fixed.
- * defaults all drives to PIO mode0, prefetch off.
- * autotune is OFF by default, with compile time flag.
- * prefetch can be turned OFF/ON using "hdparm -p8/-p9"
- * (requires hdparm-3.1 or newer)
- * Version 0.91 first release to linux-kernel list.
- * Version 0.92 move initial reg dump to separate callable function
- * change "readahead" to "prefetch" to avoid confusion
- * Version 0.95 respect original BIOS timings unless autotuning.
- * tons of code cleanup and rearrangement.
- * added CONFIG_BLK_DEV_CMD640_ENHANCED option
- * prevent use of unmask when prefetch is on
- * Version 0.96 prevent use of io_32bit when prefetch is off
- * Version 0.97 fix VLB secondary interface for [email protected]
- * other minor tune-ups: 0.96 was very good.
- * Version 0.98 ignore PCI version when disabled by BIOS
- * Version 0.99 display setup/active/recovery clocks with PIO mode
- * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems
- * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7"
- * ("fast" is necessary for 32bit I/O in some systems)
- * Version 1.02 fix bug that resulted in slow "setup times"
- * (patch courtesy of Zoltan Hidvegi)
- */
-
-#undef REALLY_SLOW_IO /* most systems can safely undef this */
-#define CMD640_PREFETCH_MASKS 1
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#include "ide_modes.h"
-
-/*
- * This flag is set in ide.c by the parameter: ide0=cmd640_vlb
- */
-int cmd640_vlb = 0;
-
-/*
- * CMD640 specific registers definition.
- */
-
-#define VID 0x00
-#define DID 0x02
-#define PCMD 0x04
-#define PCMD_ENA 0x01
-#define PSTTS 0x06
-#define REVID 0x08
-#define PROGIF 0x09
-#define SUBCL 0x0a
-#define BASCL 0x0b
-#define BaseA0 0x10
-#define BaseA1 0x14
-#define BaseA2 0x18
-#define BaseA3 0x1c
-#define INTLINE 0x3c
-#define INPINE 0x3d
-
-#define CFR 0x50
-#define CFR_DEVREV 0x03
-#define CFR_IDE01INTR 0x04
-#define CFR_DEVID 0x18
-#define CFR_AT_VESA_078h 0x20
-#define CFR_DSA1 0x40
-#define CFR_DSA0 0x80
-
-#define CNTRL 0x51
-#define CNTRL_DIS_RA0 0x40
-#define CNTRL_DIS_RA1 0x80
-#define CNTRL_ENA_2ND 0x08
-
-#define CMDTIM 0x52
-#define ARTTIM0 0x53
-#define DRWTIM0 0x54
-#define ARTTIM1 0x55
-#define DRWTIM1 0x56
-#define ARTTIM23 0x57
-#define ARTTIM23_DIS_RA2 0x04
-#define ARTTIM23_DIS_RA3 0x08
-#define DRWTIM23 0x58
-#define BRST 0x59
-
-/*
- * Registers and masks for easy access by drive index:
- */
-static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
-static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
-
-/*
- * Current cmd640 timing values for each drive.
- * The defaults for each are the slowest possible timings.
- */
-static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
-static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
-static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
-
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-/*
- * These are initialized to point at the devices we control
- */
-static ide_hwif_t *cmd_hwif0, *cmd_hwif1;
-static ide_drive_t *cmd_drives[4];
-
-/*
- * Interface to access cmd640x registers
- */
-static unsigned int cmd640_key;
-static void (*__put_cmd640_reg)(u16 reg, u8 val);
-static u8 (*__get_cmd640_reg)(u16 reg);
-
-/*
- * This is read from the CFR reg, and is used in several places.
- */
-static unsigned int cmd640_chip_version;
-
-/*
- * The CMD640x chip does not support DWORD config write cycles, but some
- * of the BIOSes use them to implement the config services.
- * Therefore, we must use direct IO instead.
- */
-
-/* PCI method 1 access */
-
-static void put_cmd640_reg_pci1 (u16 reg, u8 val)
-{
- outb_p((reg & 0xfc) | cmd640_key, 0xcf8);
- outb_p(val, (reg & 3) | 0xcfc);
-}
-
-static u8 get_cmd640_reg_pci1 (u16 reg)
-{
- outb_p((reg & 0xfc) | cmd640_key, 0xcf8);
- return inb_p((reg & 3) | 0xcfc);
-}
-
-/* PCI method 2 access (from CMD datasheet) */
-
-static void put_cmd640_reg_pci2 (u16 reg, u8 val)
-{
- outb_p(0x10, 0xcf8);
- outb_p(val, cmd640_key + reg);
- outb_p(0, 0xcf8);
-}
-
-static u8 get_cmd640_reg_pci2 (u16 reg)
-{
- u8 b;
-
- outb_p(0x10, 0xcf8);
- b = inb_p(cmd640_key + reg);
- outb_p(0, 0xcf8);
- return b;
-}
-
-/* VLB access */
-
-static void put_cmd640_reg_vlb (u16 reg, u8 val)
-{
- outb_p(reg, cmd640_key);
- outb_p(val, cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg_vlb (u16 reg)
-{
- outb_p(reg, cmd640_key);
- return inb_p(cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg(u16 reg)
-{
- u8 b;
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- b = __get_cmd640_reg(reg);
- spin_unlock_irqrestore(&ide_lock, flags);
- return b;
-}
-
-static void put_cmd640_reg(u16 reg, u8 val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- __put_cmd640_reg(reg,val);
- spin_unlock_irqrestore(&ide_lock, flags);
-}
-
-static int __init match_pci_cmd640_device (void)
-{
- const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
- unsigned int i;
- for (i = 0; i < 4; i++) {
- if (get_cmd640_reg(i) != ven_dev[i])
- return 0;
- }
-#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
- if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
- printk("ide: cmd640 on PCI disabled by BIOS\n");
- return 0;
- }
-#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
- return 1; /* success */
-}
-
-/*
- * Probe for CMD640x -- pci method 1
- */
-static int __init probe_for_cmd640_pci1 (void)
-{
- __get_cmd640_reg = get_cmd640_reg_pci1;
- __put_cmd640_reg = put_cmd640_reg_pci1;
- for (cmd640_key = 0x80000000;
- cmd640_key <= 0x8000f800;
- cmd640_key += 0x800) {
- if (match_pci_cmd640_device())
- return 1; /* success */
- }
- return 0;
-}
-
-/*
- * Probe for CMD640x -- pci method 2
- */
-static int __init probe_for_cmd640_pci2 (void)
-{
- __get_cmd640_reg = get_cmd640_reg_pci2;
- __put_cmd640_reg = put_cmd640_reg_pci2;
- for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {
- if (match_pci_cmd640_device())
- return 1; /* success */
- }
- return 0;
-}
-
-/*
- * Probe for CMD640x -- vlb
- */
-static int __init probe_for_cmd640_vlb (void)
-{
- u8 b;
-
- __get_cmd640_reg = get_cmd640_reg_vlb;
- __put_cmd640_reg = put_cmd640_reg_vlb;
- cmd640_key = 0x178;
- b = get_cmd640_reg(CFR);
- if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
- cmd640_key = 0x78;
- b = get_cmd640_reg(CFR);
- if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
- return 0;
- }
- return 1; /* success */
-}
-
-/*
- * Returns 1 if an IDE interface/drive exists at 0x170,
- * Returns 0 otherwise.
- */
-static int __init secondary_port_responding (void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
-
- outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */
- udelay(100);
- if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) {
- outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */
- udelay(100);
- if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return 0; /* nothing responded */
- }
- }
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1; /* success */
-}
-
-#ifdef CMD640_DUMP_REGS
-/*
- * Dump out all cmd640 registers. May be called from ide.c
- */
-static void cmd640_dump_regs (void)
-{
- unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
-
- /* Dump current state of chip registers */
- printk("ide: cmd640 internal register dump:");
- for (; reg <= 0x59; reg++) {
- if (!(reg & 0x0f))
- printk("\n%04x:", reg);
- printk(" %02x", get_cmd640_reg(reg));
- }
- printk("\n");
-}
-#endif
-
-/*
- * Check whether prefetch is on for a drive,
- * and initialize the unmask flags for safe operation.
- */
-static void __init check_prefetch (unsigned int index)
-{
- ide_drive_t *drive = cmd_drives[index];
- u8 b = get_cmd640_reg(prefetch_regs[index]);
-
- if (b & prefetch_masks[index]) { /* is prefetch off? */
- drive->no_unmask = 0;
- drive->no_io_32bit = 1;
- drive->io_32bit = 0;
- } else {
-#if CMD640_PREFETCH_MASKS
- drive->no_unmask = 1;
- drive->unmask = 0;
-#endif
- drive->no_io_32bit = 0;
- }
-}
-
-/*
- * Figure out which devices we control
- */
-static void __init setup_device_ptrs (void)
-{
- unsigned int i;
-
- cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */
- cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */
- for (i = 0; i < MAX_HWIFS; i++) {
- ide_hwif_t *hwif = &ide_hwifs[i];
- if (hwif->chipset == ide_unknown || hwif->chipset == ide_generic) {
- if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0)
- cmd_hwif0 = hwif;
- else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170)
- cmd_hwif1 = hwif;
- }
- }
- cmd_drives[0] = &cmd_hwif0->drives[0];
- cmd_drives[1] = &cmd_hwif0->drives[1];
- cmd_drives[2] = &cmd_hwif1->drives[0];
- cmd_drives[3] = &cmd_hwif1->drives[1];
-}
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-/*
- * Sets prefetch mode for a drive.
- */
-static void set_prefetch_mode (unsigned int index, int mode)
-{
- ide_drive_t *drive = cmd_drives[index];
- int reg = prefetch_regs[index];
- u8 b;
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- b = __get_cmd640_reg(reg);
- if (mode) { /* want prefetch on? */
-#if CMD640_PREFETCH_MASKS
- drive->no_unmask = 1;
- drive->unmask = 0;
-#endif
- drive->no_io_32bit = 0;
- b &= ~prefetch_masks[index]; /* enable prefetch */
- } else {
- drive->no_unmask = 0;
- drive->no_io_32bit = 1;
- drive->io_32bit = 0;
- b |= prefetch_masks[index]; /* disable prefetch */
- }
- __put_cmd640_reg(reg, b);
- spin_unlock_irqrestore(&ide_lock, flags);
-}
-
-/*
- * Dump out current drive clocks settings
- */
-static void display_clocks (unsigned int index)
-{
- u8 active_count, recovery_count;
-
- active_count = active_counts[index];
- if (active_count == 1)
- ++active_count;
- recovery_count = recovery_counts[index];
- if (active_count > 3 && recovery_count == 1)
- ++recovery_count;
- if (cmd640_chip_version > 1)
- recovery_count += 1; /* cmd640b uses (count + 1)*/
- printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);
-}
-
-/*
- * Pack active and recovery counts into single byte representation
- * used by controller
- */
-inline static u8 pack_nibbles (u8 upper, u8 lower)
-{
- return ((upper & 0x0f) << 4) | (lower & 0x0f);
-}
-
-/*
- * This routine retrieves the initial drive timings from the chipset.
- */
-static void __init retrieve_drive_counts (unsigned int index)
-{
- u8 b;
-
- /*
- * Get the internal setup timing, and convert to clock count
- */
- b = get_cmd640_reg(arttim_regs[index]) & ~0x3f;
- switch (b) {
- case 0x00: b = 4; break;
- case 0x80: b = 3; break;
- case 0x40: b = 2; break;
- default: b = 5; break;
- }
- setup_counts[index] = b;
-
- /*
- * Get the active/recovery counts
- */
- b = get_cmd640_reg(drwtim_regs[index]);
- active_counts[index] = (b >> 4) ? (b >> 4) : 0x10;
- recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10;
-}
-
-
-/*
- * This routine writes the prepared setup/active/recovery counts
- * for a drive into the cmd640 chipset registers to active them.
- */
-static void program_drive_counts (unsigned int index)
-{
- unsigned long flags;
- u8 setup_count = setup_counts[index];
- u8 active_count = active_counts[index];
- u8 recovery_count = recovery_counts[index];
-
- /*
- * Set up address setup count and drive read/write timing registers.
- * Primary interface has individual count/timing registers for
- * each drive. Secondary interface has one common set of registers,
- * so we merge the timings, using the slowest value for each timing.
- */
- if (index > 1) {
- unsigned int mate;
- if (cmd_drives[mate = index ^ 1]->present) {
- if (setup_count < setup_counts[mate])
- setup_count = setup_counts[mate];
- if (active_count < active_counts[mate])
- active_count = active_counts[mate];
- if (recovery_count < recovery_counts[mate])
- recovery_count = recovery_counts[mate];
- }
- }
-
- /*
- * Convert setup_count to internal chipset representation
- */
- switch (setup_count) {
- case 4: setup_count = 0x00; break;
- case 3: setup_count = 0x80; break;
- case 1:
- case 2: setup_count = 0x40; break;
- default: setup_count = 0xc0; /* case 5 */
- }
-
- /*
- * Now that everything is ready, program the new timings
- */
- spin_lock_irqsave(&ide_lock, flags);
- /*
- * Program the address_setup clocks into ARTTIM reg,
- * and then the active/recovery counts into the DRWTIM reg
- * (this converts counts of 16 into counts of zero -- okay).
- */
- setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
- __put_cmd640_reg(arttim_regs[index], setup_count);
- __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count));
- spin_unlock_irqrestore(&ide_lock, flags);
-}
-
-/*
- * Set a specific pio_mode for a drive
- */
-static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time)
-{
- int setup_time, active_time, recovery_time, clock_time;
- u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
- int bus_speed = system_bus_clock();
-
- if (pio_mode > 5)
- pio_mode = 5;
- setup_time = ide_pio_timings[pio_mode].setup_time;
- active_time = ide_pio_timings[pio_mode].active_time;
- recovery_time = cycle_time - (setup_time + active_time);
- clock_time = 1000 / bus_speed;
- cycle_count = (cycle_time + clock_time - 1) / clock_time;
-
- setup_count = (setup_time + clock_time - 1) / clock_time;
-
- active_count = (active_time + clock_time - 1) / clock_time;
- if (active_count < 2)
- active_count = 2; /* minimum allowed by cmd640 */
-
- recovery_count = (recovery_time + clock_time - 1) / clock_time;
- recovery_count2 = cycle_count - (setup_count + active_count);
- if (recovery_count2 > recovery_count)
- recovery_count = recovery_count2;
- if (recovery_count < 2)
- recovery_count = 2; /* minimum allowed by cmd640 */
- if (recovery_count > 17) {
- active_count += recovery_count - 17;
- recovery_count = 17;
- }
- if (active_count > 16)
- active_count = 16; /* maximum allowed by cmd640 */
- if (cmd640_chip_version > 1)
- recovery_count -= 1; /* cmd640b uses (count + 1)*/
- if (recovery_count > 16)
- recovery_count = 16; /* maximum allowed by cmd640 */
-
- setup_counts[index] = setup_count;
- active_counts[index] = active_count;
- recovery_counts[index] = recovery_count;
-
- /*
- * In a perfect world, we might set the drive pio mode here
- * (using WIN_SETFEATURE) before continuing.
- *
- * But we do not, because:
- * 1) this is the wrong place to do it (proper is do_special() in ide.c)
- * 2) in practice this is rarely, if ever, necessary
- */
- program_drive_counts (index);
-}
-
-/*
- * Drive PIO mode selection:
- */
-static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
-{
- u8 b;
- ide_pio_data_t d;
- unsigned int index = 0;
-
- while (drive != cmd_drives[index]) {
- if (++index > 3) {
- printk("%s: bad news in cmd640_tune_drive\n", drive->name);
- return;
- }
- }
- switch (mode_wanted) {
- case 6: /* set fast-devsel off */
- case 7: /* set fast-devsel on */
- mode_wanted &= 1;
- b = get_cmd640_reg(CNTRL) & ~0x27;
- if (mode_wanted)
- b |= 0x27;
- put_cmd640_reg(CNTRL, b);
- printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
- return;
-
- case 8: /* set prefetch off */
- case 9: /* set prefetch on */
- mode_wanted &= 1;
- set_prefetch_mode(index, mode_wanted);
- printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
- return;
- }
-
- (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
- cmd640_set_mode (index, d.pio_mode, d.cycle_time);
-
- printk ("%s: selected cmd640 PIO mode%d (%dns)%s",
- drive->name,
- d.pio_mode,
- d.cycle_time,
- d.overridden ? " (overriding vendor mode)" : "");
- display_clocks(index);
- return;
-}
-
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static int pci_conf1(void)
-{
- u32 tmp;
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- outb(0x01, 0xCFB);
- tmp = inl(0xCF8);
- outl(0x80000000, 0xCF8);
- if (inl(0xCF8) == 0x80000000) {
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1;
- }
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&ide_lock, flags);
- return 0;
-}
-
-static int pci_conf2(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- outb(0x00, 0xCFB);
- outb(0x00, 0xCF8);
- outb(0x00, 0xCFA);
- if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1;
- }
- spin_unlock_irqrestore(&ide_lock, flags);
- return 0;
-}
-
-/*
- * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c
- */
-int __init ide_probe_for_cmd640x (void)
-{
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- int second_port_toggled = 0;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- int second_port_cmd640 = 0;
- const char *bus_type, *port2;
- unsigned int index;
- u8 b, cfr;
-
- if (cmd640_vlb && probe_for_cmd640_vlb()) {
- bus_type = "VLB";
- } else {
- cmd640_vlb = 0;
- /* Find out what kind of PCI probing is supported otherwise
- Justin Gibbs will sulk.. */
- if (pci_conf1() && probe_for_cmd640_pci1())
- bus_type = "PCI (type1)";
- else if (pci_conf2() && probe_for_cmd640_pci2())
- bus_type = "PCI (type2)";
- else
- return 0;
- }
- /*
- * Undocumented magic (there is no 0x5b reg in specs)
- */
- put_cmd640_reg(0x5b, 0xbd);
- if (get_cmd640_reg(0x5b) != 0xbd) {
- printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n");
- return 0;
- }
- put_cmd640_reg(0x5b, 0);
-
-#ifdef CMD640_DUMP_REGS
- CMD640_DUMP_REGS;
-#endif
-
- /*
- * Documented magic begins here
- */
- cfr = get_cmd640_reg(CFR);
- cmd640_chip_version = cfr & CFR_DEVREV;
- if (cmd640_chip_version == 0) {
- printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
- return 0;
- }
-
- /*
- * Initialize data for primary port
- */
- setup_device_ptrs ();
- printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
- cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
- cmd_hwif0->chipset = ide_cmd640;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif0->tuneproc = &cmd640_tune_drive;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
- /*
- * Ensure compatibility by always using the slowest timings
- * for access to the drive's command register block,
- * and reset the prefetch burstsize to default (512 bytes).
- *
- * Maybe we need a way to NOT do these on *some* systems?
- */
- put_cmd640_reg(CMDTIM, 0);
- put_cmd640_reg(BRST, 0x40);
-
- /*
- * Try to enable the secondary interface, if not already enabled
- */
- if (cmd_hwif1->noprobe) {
- port2 = "not probed";
- } else {
- b = get_cmd640_reg(CNTRL);
- if (secondary_port_responding()) {
- if ((b & CNTRL_ENA_2ND)) {
- second_port_cmd640 = 1;
- port2 = "okay";
- } else if (cmd640_vlb) {
- second_port_cmd640 = 1;
- port2 = "alive";
- } else
- port2 = "not cmd640";
- } else {
- put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
- if (secondary_port_responding()) {
- second_port_cmd640 = 1;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- second_port_toggled = 1;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- port2 = "enabled";
- } else {
- put_cmd640_reg(CNTRL, b); /* restore original setting */
- port2 = "not responding";
- }
- }
- }
-
- /*
- * Initialize data for secondary cmd640 port, if enabled
- */
- if (second_port_cmd640) {
- cmd_hwif0->serialized = 1;
- cmd_hwif1->serialized = 1;
- cmd_hwif1->chipset = ide_cmd640;
- cmd_hwif0->mate = cmd_hwif1;
- cmd_hwif1->mate = cmd_hwif0;
- cmd_hwif1->channel = 1;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif1->tuneproc = &cmd640_tune_drive;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- }
- printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
- cmd_hwif0->serialized ? "" : "not ", port2);
-
- /*
- * Establish initial timings/prefetch for all drives.
- * Do not unnecessarily disturb any prior BIOS setup of these.
- */
- for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
- ide_drive_t *drive = cmd_drives[index];
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- if (drive->autotune || ((index > 1) && second_port_toggled)) {
- /*
- * Reset timing to the slowest speed and turn off prefetch.
- * This way, the drive identify code has a better chance.
- */
- setup_counts [index] = 4; /* max possible */
- active_counts [index] = 16; /* max possible */
- recovery_counts [index] = 16; /* max possible */
- program_drive_counts (index);
- set_prefetch_mode (index, 0);
- printk("cmd640: drive%d timings/prefetch cleared\n", index);
- } else {
- /*
- * Record timings/prefetch without changing them.
- * This preserves any prior BIOS setup.
- */
- retrieve_drive_counts (index);
- check_prefetch (index);
- printk("cmd640: drive%d timings/prefetch(%s) preserved",
- index, drive->no_io_32bit ? "off" : "on");
- display_clocks(index);
- }
-#else
- /*
- * Set the drive unmask flags to match the prefetch setting
- */
- check_prefetch (index);
- printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
- index, drive->no_io_32bit ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- }
-
-#ifdef CMD640_DUMP_REGS
- CMD640_DUMP_REGS;
-#endif
- return 1;
-}
-
diff -urN a/drivers/ide/pci/cmd640.h b/drivers/ide/pci/cmd640.h
--- a/drivers/ide/pci/cmd640.h 2003-05-11 15:50:07.000000000 +0200
+++ b/drivers/ide/pci/cmd640.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,32 +0,0 @@
-#ifndef CMD640_H
-#define CMD640_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define IDE_IGNORE ((void *)-1)
-
-static ide_pci_device_t cmd640_chipsets[] __initdata = {
- {
- .vendor = PCI_VENDOR_ID_CMD,
- .device = PCI_DEVICE_ID_CMD_640,
- .name = "CMD640",
- .init_setup = NULL,
- .init_chipset = NULL,
- .init_iops = NULL,
- .init_hwif = IDE_IGNORE,
- .init_dma = NULL,
- .channels = 2,
- .autodma = NODMA,
- .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
- .bootable = ON_BOARD,
- .extra = 0
- },{
- .vendor = 0,
- .device = 0,
- .bootable = EOL,
- }
-}
-
-#endif /* CMD640_H */
On Sul, 2003-05-11 at 16:03, Tomas Szepe wrote:
> The patch (against 2.4.21-rc2-ac1) is rather large, because it
> o moves cmd640.c from drivers/ide/pci to drivers/ide, and
> o deletes cmd640.h as it is no longer used.
Please dont move cmd640, the drivers dont go in the top ide directory
> I'm sure the patch is far from perfect yet (esp. what I did to
> ide-default.c isn't nice at all -- I couldn't see why the object
> was meant to be a module, or maybe I just got lost in untangling the
> reference loops), the result, however, seems to work (for a change).
ide-default is never going to be a module so that bit is ok.
> [[email protected]]
>
> On Sul, 2003-05-11 at 16:03, Tomas Szepe wrote:
> > The patch (against 2.4.21-rc2-ac1) is rather large, because it
> > o moves cmd640.c from drivers/ide/pci to drivers/ide, and
> > o deletes cmd640.h as it is no longer used.
>
> Please dont move cmd640, the drivers dont go in the top ide directory
[CC list trimmed]
I can't seem to get make to build the objects in pci/ before compiling
in the top level ide directory and a cross-directory dependency on
pci/cmd640.o isn't exactly nice. :( I could use some help, fs/Makefile
does exactly what ide needs (builds objects in fs's subdirs then links them
together with fs/*.o, except for for -y, not -m) but contains no magic
whatsoever as far as I can tell.
T.