Hi,
I put 2.5 on my router, and now wondershaper doesn't work anymore. Am I
completely out of whack, or shouldn't the below just fly:
router:~ # tc -s qdisc ls dev lo
RTNETLINK answers: Invalid argument
Dump terminated
I have the various QOS stuff enabled (config attached, and I don't seem
to be missing anything. So what is up?
--
Jens Axboe
On Wed, May 14, 2003 at 09:06:00AM +0200, Jens Axboe wrote:
> Hi,
>
> I put 2.5 on my router, and now wondershaper doesn't work anymore. Am I
> completely out of whack, or shouldn't the below just fly:
>
> router:~ # tc -s qdisc ls dev lo
> RTNETLINK answers: Invalid argument
> Dump terminated
>
> I have the various QOS stuff enabled (config attached, and I don't seem
> to be missing anything. So what is up?
Good question, I've been seeing it since I moved from 2.5.68-mm2 to
2.5.68-mm4, from what I can tell it was something in Linus' bk that was
pulled in that killed it.
However I have had no luck at all trying to figure out what exactly
broke.
Attached is my config as well.
Hopefully SOMEONE will figure out WTF is going wrong, and soon.
Zephaniah E. Hull.
--
1024D/E65A7801 Zephaniah E. Hull <[email protected]>
92ED 94E4 B1E6 3624 226D 5727 4453 008B E65A 7801
CCs of replies from mailing lists are requested.
<aj> ``Who killed the server at the colo site?'' ``Weasel killed the
server at the colo site'' ``Not me'' ``Then who?'' ``m2 killed the
server at the colo site'' ...
On Wed, May 14 2003, Zephaniah E. Hull wrote:
> On Wed, May 14, 2003 at 09:06:00AM +0200, Jens Axboe wrote:
> > Hi,
> >
> > I put 2.5 on my router, and now wondershaper doesn't work anymore. Am I
> > completely out of whack, or shouldn't the below just fly:
> >
> > router:~ # tc -s qdisc ls dev lo
> > RTNETLINK answers: Invalid argument
> > Dump terminated
> >
> > I have the various QOS stuff enabled (config attached, and I don't seem
> > to be missing anything. So what is up?
>
> Good question, I've been seeing it since I moved from 2.5.68-mm2 to
> 2.5.68-mm4, from what I can tell it was something in Linus' bk that was
> pulled in that killed it.
>
> However I have had no luck at all trying to figure out what exactly
> broke.
Interesting, I didn't know it broke that recently. Looking at changes
between -mm2 and -mm4 doesn't reveal a lot, really... Acme made most of
the changes there it seems, any ideas?
--
Jens Axboe
On Wed, May 14 2003, Jens Axboe wrote:
> On Wed, May 14 2003, Zephaniah E. Hull wrote:
> > On Wed, May 14, 2003 at 09:06:00AM +0200, Jens Axboe wrote:
> > > Hi,
> > >
> > > I put 2.5 on my router, and now wondershaper doesn't work anymore. Am I
> > > completely out of whack, or shouldn't the below just fly:
> > >
> > > router:~ # tc -s qdisc ls dev lo
> > > RTNETLINK answers: Invalid argument
> > > Dump terminated
> > >
> > > I have the various QOS stuff enabled (config attached, and I don't seem
> > > to be missing anything. So what is up?
> >
> > Good question, I've been seeing it since I moved from 2.5.68-mm2 to
> > 2.5.68-mm4, from what I can tell it was something in Linus' bk that was
> > pulled in that killed it.
> >
> > However I have had no luck at all trying to figure out what exactly
> > broke.
>
> Interesting, I didn't know it broke that recently. Looking at changes
> between -mm2 and -mm4 doesn't reveal a lot, really... Acme made most of
> the changes there it seems, any ideas?
This half-assed back-out from bk current makes it work here, Arnaldo
could you please fix this??
===== include/linux/net.h 1.16 vs edited =====
--- 1.16/include/linux/net.h Mon May 12 23:35:19 2003
+++ edited/include/linux/net.h Wed May 14 14:55:52 2003
@@ -89,11 +89,9 @@
struct kiocb;
struct sockaddr;
struct msghdr;
-struct module;
struct proto_ops {
int family;
- struct module *owner;
int (*release) (struct socket *sock);
int (*bind) (struct socket *sock,
struct sockaddr *myaddr,
@@ -129,6 +127,8 @@
int offset, size_t size, int flags);
};
+struct module;
+
struct net_proto_family {
int family;
int (*create)(struct socket *sock, int protocol);
@@ -224,7 +224,7 @@
\
static struct proto_ops name##_ops = { \
.family = fam, \
- .owner = THIS_MODULE, \
+ \
.release = __lock_##name##_release, \
.bind = __lock_##name##_bind, \
.connect = __lock_##name##_connect, \
===== include/net/sock.h 1.37 vs edited =====
--- 1.37/include/net/sock.h Sat May 3 07:55:11 2003
+++ edited/include/net/sock.h Wed May 14 14:54:19 2003
@@ -43,7 +43,7 @@
#include <linux/config.h>
#include <linux/timer.h>
#include <linux/cache.h>
-#include <linux/module.h>
+
#include <linux/netdevice.h>
#include <linux/skbuff.h> /* struct sk_buff */
#include <linux/security.h>
@@ -197,7 +197,6 @@
void *user_data;
/* Callbacks */
- struct module *owner;
void (*state_change)(struct sock *sk);
void (*data_ready)(struct sock *sk,int bytes);
void (*write_space)(struct sock *sk);
@@ -270,23 +269,6 @@
u8 __pad[SMP_CACHE_BYTES - sizeof(int)];
} stats[NR_CPUS];
};
-
-static __inline__ void sk_set_owner(struct sock *sk, struct module *owner)
-{
- /*
- * One should use sk_set_owner just once, after struct sock creation,
- * be it shortly after sk_alloc or after a function that returns a new
- * struct sock (and that down the call chain called sk_alloc), e.g. the
- * IPv4 and IPv6 modules share tcp_create_openreq_child, so if
- * tcp_create_openreq_child called sk_set_owner IPv6 would have to
- * change the ownership of this struct sock, with one not needed
- * transient sk_set_owner call.
- */
- if (unlikely(sk->owner != NULL))
- BUG();
- sk->owner = owner;
- __module_get(owner);
-}
/* Called with local bh disabled */
static __inline__ void sock_prot_inc_use(struct proto *prot)
===== net/socket.c 1.60 vs edited =====
--- 1.60/net/socket.c Mon May 12 23:35:19 2003
+++ edited/net/socket.c Wed May 14 14:57:40 2003
@@ -69,6 +69,8 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/wanrouter.h>
+#include <linux/netlink.h>
+#include <linux/rtnetlink.h>
#include <linux/if_bridge.h>
#include <linux/init.h>
#include <linux/poll.h>
@@ -507,11 +509,11 @@
void sock_release(struct socket *sock)
{
if (sock->ops) {
- struct module *owner = sock->ops->owner;
+ const int family = sock->ops->family;
sock->ops->release(sock);
sock->ops = NULL;
- module_put(owner);
+ module_put(net_families[family]->owner);
}
if (sock->fasync_list)
@@ -1062,37 +1064,19 @@
sock->type = type;
- /*
- * We will call the ->create function, that possibly is in a loadable
- * module, so we have to bump that loadable module refcnt first.
- */
i = -EAFNOSUPPORT;
if (!try_module_get(net_families[family]->owner))
goto out_release;
- if ((i = net_families[family]->create(sock, protocol)) < 0)
- goto out_module_put;
- /*
- * Now to bump the refcnt of the [loadable] module that owns this
- * socket at sock_release time we decrement its refcnt.
- */
- if (!try_module_get(sock->ops->owner)) {
- sock->ops = NULL;
- goto out_module_put;
- }
- /*
- * Now that we're done with the ->create function, the [loadable]
- * module can have its refcnt decremented
- */
- module_put(net_families[family]->owner);
+ if ((i = net_families[family]->create(sock, protocol)) < 0)
+ goto out_release;
+
*res = sock;
security_socket_post_create(sock, family, type, protocol);
out:
net_family_read_unlock();
return i;
-out_module_put:
- module_put(net_families[family]->owner);
out_release:
sock_release(sock);
goto out;
@@ -1277,12 +1261,7 @@
if (err)
goto out_release;
- /*
- * We don't need try_module_get here, as the listening socket (sock)
- * has the protocol module (sock->ops->owner) held.
- */
- __module_get(newsock->ops->owner);
-
+ err = -EAFNOSUPPORT;
err = sock->ops->accept(sock, newsock, sock->file->f_flags);
if (err < 0)
goto out_release;
@@ -1980,6 +1959,17 @@
* do_initcalls is run.
*/
+
+ /*
+ * The netlink device handler may be needed early.
+ */
+
+#ifdef CONFIG_NET
+ rtnetlink_init();
+#endif
+#ifdef CONFIG_NETLINK_DEV
+ init_netlink();
+#endif
#ifdef CONFIG_NETFILTER
netfilter_init();
#endif
===== net/core/sock.c 1.24 vs edited =====
--- 1.24/net/core/sock.c Sat May 3 07:55:11 2003
+++ edited/net/core/sock.c Wed May 14 14:55:52 2003
@@ -589,8 +589,8 @@
*/
struct sock *sk_alloc(int family, int priority, int zero_it, kmem_cache_t *slab)
{
- struct sock *sk = NULL;
-
+ struct sock *sk;
+
if (!slab)
slab = sk_cachep;
sk = kmem_cache_alloc(slab, priority);
@@ -603,13 +603,13 @@
}
sk->slab = slab;
}
+
return sk;
}
void sk_free(struct sock *sk)
{
struct sk_filter *filter;
- struct module *owner = sk->owner;
if (sk->destruct)
sk->destruct(sk);
@@ -624,7 +624,6 @@
printk(KERN_DEBUG "sk_free: optmem leakage (%d bytes) detected.\n", atomic_read(&sk->omem_alloc));
kmem_cache_free(sk->slab, sk);
- module_put(owner);
}
void __init sk_init(void)
@@ -1108,7 +1107,6 @@
sk->rcvlowat = 1;
sk->rcvtimeo = MAX_SCHEDULE_TIMEOUT;
sk->sndtimeo = MAX_SCHEDULE_TIMEOUT;
- sk->owner = NULL;
atomic_set(&sk->refcnt, 1);
}
===== net/ipv4/af_inet.c 1.47 vs edited =====
--- 1.47/net/ipv4/af_inet.c Mon May 12 22:25:51 2003
+++ edited/net/ipv4/af_inet.c Wed May 14 15:00:27 2003
@@ -390,7 +390,9 @@
inet->id = 0;
sock_init_data(sock, sk);
+#if 0
sk_set_owner(sk, THIS_MODULE);
+#endif
sk->destruct = inet_sock_destruct;
sk->zapped = 0;
@@ -884,7 +886,9 @@
struct proto_ops inet_stream_ops = {
.family = PF_INET,
+#if 0
.owner = THIS_MODULE,
+#endif
.release = inet_release,
.bind = inet_bind,
.connect = inet_stream_connect,
@@ -905,7 +909,9 @@
struct proto_ops inet_dgram_ops = {
.family = PF_INET,
+#if 0
.owner = THIS_MODULE,
+#endif
.release = inet_release,
.bind = inet_bind,
.connect = inet_dgram_connect,
===== net/ipv4/arp.c 1.20 vs edited =====
--- 1.20/net/ipv4/arp.c Sat May 10 20:46:35 2003
+++ edited/net/ipv4/arp.c Wed May 14 14:59:52 2003
@@ -1384,7 +1384,9 @@
}
static struct file_operations arp_seq_fops = {
+#if 0
.owner = THIS_MODULE,
+#endif
.open = arp_seq_open,
.read = seq_read,
.llseek = seq_lseek,
===== net/ipv4/fib_hash.c 1.12 vs edited =====
--- 1.12/net/ipv4/fib_hash.c Sat May 10 20:46:35 2003
+++ edited/net/ipv4/fib_hash.c Wed May 14 15:00:51 2003
@@ -1065,7 +1065,9 @@
}
static struct file_operations fib_seq_fops = {
+#if 0
.owner = THIS_MODULE,
+#endif
.open = fib_seq_open,
.read = seq_read,
.llseek = seq_lseek,
===== net/ipv4/proc.c 1.12 vs edited =====
--- 1.12/net/ipv4/proc.c Sat May 10 20:46:35 2003
+++ edited/net/ipv4/proc.c Wed May 14 15:01:13 2003
@@ -80,7 +80,9 @@
}
static struct file_operations sockstat_seq_fops = {
+#if 0
.owner = THIS_MODULE,
+#endif
.open = sockstat_seq_open,
.read = seq_read,
.llseek = seq_lseek,
@@ -172,7 +174,9 @@
}
static struct file_operations snmp_seq_fops = {
+#if 0
.owner = THIS_MODULE,
+#endif
.open = snmp_seq_open,
.read = seq_read,
.llseek = seq_lseek,
@@ -229,7 +233,9 @@
}
static struct file_operations netstat_seq_fops = {
+#if 0
.owner = THIS_MODULE,
+#endif
.open = netstat_seq_open,
.read = seq_read,
.llseek = seq_lseek,
===== net/ipv4/syncookies.c 1.12 vs edited =====
--- 1.12/net/ipv4/syncookies.c Sat May 3 08:42:59 2003
+++ edited/net/ipv4/syncookies.c Wed May 14 15:01:33 2003
@@ -102,7 +102,9 @@
child = tp->af_specific->syn_recv_sock(sk, skb, req, dst);
if (child) {
+#if 0
sk_set_owner(child, sk->owner);
+#endif
tcp_acceptq_queue(sk, req, child);
} else
tcp_openreq_free(req);
===== net/ipv4/tcp_minisocks.c 1.29 vs edited =====
--- 1.29/net/ipv4/tcp_minisocks.c Sat May 10 13:21:56 2003
+++ edited/net/ipv4/tcp_minisocks.c Wed May 14 14:59:16 2003
@@ -760,7 +760,9 @@
tcp_reset_keepalive_timer(newsk, keepalive_time_when(newtp));
newsk->socket = NULL;
newsk->sleep = NULL;
+#if 0
newsk->owner = NULL;
+#endif
newtp->tstamp_ok = req->tstamp_ok;
if((newtp->sack_ok = req->sack_ok) != 0) {
@@ -970,7 +972,9 @@
if (child == NULL)
goto listen_overflow;
+#if 0
sk_set_owner(child, sk->owner);
+#endif
tcp_synq_unlink(tp, req, prev);
tcp_synq_removed(sk, req);
===== net/netlink/af_netlink.c 1.23 vs edited =====
--- 1.23/net/netlink/af_netlink.c Sat May 3 08:31:31 2003
+++ edited/net/netlink/af_netlink.c Wed May 14 15:02:38 2003
@@ -235,7 +235,9 @@
return -ENOMEM;
sock_init_data(sock,sk);
+#if 0
sk_set_owner(sk, THIS_MODULE);
+#endif
nlk = nlk_sk(sk) = kmalloc(sizeof(*nlk), GFP_KERNEL);
if (!nlk) {
@@ -1031,7 +1033,9 @@
struct proto_ops netlink_ops = {
.family = PF_NETLINK,
+#if 0
.owner = THIS_MODULE,
+#endif
.release = netlink_release,
.bind = netlink_bind,
.connect = netlink_connect,
@@ -1053,7 +1057,6 @@
struct net_proto_family netlink_family_ops = {
.family = PF_NETLINK,
.create = netlink_create,
- .owner = THIS_MODULE, /* for consistency 8) */
};
static int __init netlink_proto_init(void)
@@ -1068,11 +1071,6 @@
#ifdef CONFIG_PROC_FS
create_proc_read_entry("net/netlink", 0, 0, netlink_read_proc, NULL);
#endif
- /* The netlink device handler may be needed early. */
- rtnetlink_init();
-#ifdef CONFIG_NETLINK_DEV
- init_netlink();
-#endif
return 0;
}
@@ -1082,7 +1080,7 @@
remove_proc_entry("net/netlink", NULL);
}
-subsys_initcall(netlink_proto_init);
+module_init(netlink_proto_init);
module_exit(netlink_proto_exit);
MODULE_LICENSE("GPL");
===== net/packet/af_packet.c 1.24 vs edited =====
--- 1.24/net/packet/af_packet.c Mon May 12 22:16:38 2003
+++ edited/net/packet/af_packet.c Wed May 14 15:03:15 2003
@@ -473,7 +473,9 @@
if (pskb_trim(skb, snaplen))
goto drop_n_acct;
+#if 0
skb_set_owner_r(skb, sk);
+#endif
skb->dev = NULL;
spin_lock(&sk->receive_queue.lock);
po->stats.tp_packets++;
@@ -954,7 +956,9 @@
sock->ops = &packet_ops_spkt;
#endif
sock_init_data(sock,sk);
+#if 0
sk_set_owner(sk, THIS_MODULE);
+#endif
po = pkt_sk(sk) = kmalloc(sizeof(*po), GFP_KERNEL);
if (!po)
@@ -1715,7 +1719,9 @@
#ifdef CONFIG_SOCK_PACKET
struct proto_ops packet_ops_spkt = {
.family = PF_PACKET,
+#if 0
.owner = THIS_MODULE,
+#endif
.release = packet_release,
.bind = packet_bind_spkt,
.connect = sock_no_connect,
@@ -1737,7 +1743,7 @@
struct proto_ops packet_ops = {
.family = PF_PACKET,
- .owner = THIS_MODULE,
+ //.owner = THIS_MODULE,
.release = packet_release,
.bind = packet_bind,
.connect = sock_no_connect,
===== net/unix/af_unix.c 1.43 vs edited =====
--- 1.43/net/unix/af_unix.c Mon May 5 07:49:54 2003
+++ edited/net/unix/af_unix.c Wed May 14 15:04:04 2003
@@ -494,7 +494,9 @@
atomic_inc(&unix_nr_socks);
sock_init_data(sock,sk);
+#if 0
sk_set_owner(sk, THIS_MODULE);
+#endif
sk->write_space = unix_write_space;
@@ -1885,7 +1887,7 @@
struct proto_ops unix_stream_ops = {
.family = PF_UNIX,
- .owner = THIS_MODULE,
+ //.owner = THIS_MODULE,
.release = unix_release,
.bind = unix_bind,
.connect = unix_stream_connect,
@@ -1906,7 +1908,7 @@
struct proto_ops unix_dgram_ops = {
.family = PF_UNIX,
- .owner = THIS_MODULE,
+ //.owner = THIS_MODULE,
.release = unix_release,
.bind = unix_bind,
.connect = unix_dgram_connect,
--
Jens Axboe
On Wednesday, 14 May 2003, at 09:06:00 +0200,
Jens Axboe wrote:
> I put 2.5 on my router, and now wondershaper doesn't work anymore. Am I
> completely out of whack, or shouldn't the below just fly:
>
Works here (2.5.68 and 2.5.6)) with the config file appended, but while you
are at it, maybe you can have a look at bug 657 (buzilla.kernel.org). It
is related to the same subsystem (traffic control), and as you can see
in the reports, it seems a regression with respect to 2.4.x.
Hope it helps.
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_DM=m
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
# CONFIG_IP_ROUTE_NAT is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_ROUTE_LARGE_TABLES is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=m
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_IPF=m
CONFIG_BRIDGE_EBT_ARPF=m
CONFIG_BRIDGE_EBT_VLANF=m
CONFIG_BRIDGE_EBT_MARKF=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_MARK_T=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_VIAPRO=m
#
# I2C Hardware Sensors Chip support
#
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_I2C_SENSOR=m
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_AMD7XX_TCO is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_MEMORY is not set
CONFIG_SND_DEBUG_DETECT=y
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=m
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# SCSI support is needed for USB Storage
#
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
--
Jose Luis Domingo Lopez
Linux Registered User #189436 Debian Linux Sid (Linux 2.5.69)
From: Jens Axboe <[email protected]>
Date: Wed, 14 May 2003 15:08:38 +0200
This half-assed back-out from bk current makes it work here, Arnaldo
could you please fix this??
This is a good clue, thanks for tracking it down this far.
I'll help figure out what's wrong, I can reproduce the problem
here too.
I believe the problem has something to do with changing when the
rtnetlink/netlink init runs, not the socket owner stuff.
On Wed, 14 May 2003 12:59:23 -0700 (PDT) "David S. Miller" <[email protected]> wrote:
| From: Jens Axboe <[email protected]>
| Date: Wed, 14 May 2003 15:08:38 +0200
|
| This half-assed back-out from bk current makes it work here, Arnaldo
| could you please fix this??
|
| This is a good clue, thanks for tracking it down this far.
| I'll help figure out what's wrong, I can reproduce the problem
| here too.
|
| I believe the problem has something to do with changing when the
| rtnetlink/netlink init runs, not the socket owner stuff.
Ah, init ordering. If it involvles initcalls (I see
./netlink/af_netlink.c:subsys_initcall(netlink_proto_init);),
you can set initcall_debug=1 on the kernel command line to get a
list of initcall addresses dumped into the syslog.
Then you can grep those lines and convert them to names
using
http://www.xenotime.net/linux/scripts/cvrt_initcalls
which calls
http://www.xenotime.net/linux/scripts/ksysmap
if that will help you any.
--
~Randy
From: "Randy.Dunlap" <[email protected]>
Date: Wed, 14 May 2003 13:05:08 -0700
you can set initcall_debug=1 on the kernel command line
Thanks for the tip. :-)
But I know what the invocation ordering is, I think that we merely do
not realize what the dependency is.
On Wed, May 14 2003, David S. Miller wrote:
> I believe the problem has something to do with changing when the
> rtnetlink/netlink init runs, not the socket owner stuff.
I didn't expect the socket owner stuff either, but one patch backout
made the kernel crap out when compiling so I had to get the duct tape :)
Anyways, bk-current works, I'm happy again.
--
Jens Axboe