[Please CC me as I am not subscribed to the list]
I just upgraded from a 2.4.20 to 2.4.21 but had to revert due to the following
errors:
hdd: dma_timer_expiry: dma status == 0x60
hdd: timeout waiting for DMA
hdd: lost interrupt
This chipset is:
Bus 0, device 15, function 0:
ISA bridge: ServerWorks CSB5 South Bridge (rev 147).
Bus 0, device 15, function 1:
IDE interface: ServerWorks CSB5 IDE Controller (rev 147).
Bus 0, device 15, function 2:
USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 5).
on a bi-pentium III machine.
With 2.4.20 and the ide1=ata66 kernel option, that setup worked great:
# /sbin/hdparm -t /dev/hdd
/dev/hdd:
Timing buffered disk reads: 64 MB in 1.37 seconds = 46.72 MB/sec
(thanks to all for such great performance (same as SCSI!))
For 2.4.21, I just added the new "Generic PCI IDE Chipset Support" (no help
provided), and recompiled, then rebooted. The 2.4.20 message:
hdd:351651888sectors(180046 MB)w/2048KiBCache,CHS=21889/255/63,UDMA(100)
appeared on 2.4.21 as (notice that UDMA(100) has dissapeared):
hdd:351651888sectors(180046 MB)w/2048KiBCache,CHS=21889/255/63
I then tried hdparm, which came up with only 2.5 MB/sec, then forced DMA which
hdparm, tested again and got the errors cited at the beginning of this
message.
Please let me know if you'd like me to perform some tests, but as I can only
reboot once or twice at lunch time.
Regards,
Jean-Luc
Hi,
Do you have ServerWorks IDE support compiled in 2.4.21?
Can you send me boot logs from 2.4.20 and 2.4.21?
Regards,
--
Bartlomiej
On Mon, 16 Jun 2003 [email protected] wrote:
> [Please CC me as I am not subscribed to the list]
>
> I just upgraded from a 2.4.20 to 2.4.21 but had to revert due to the following
> errors:
> hdd: dma_timer_expiry: dma status == 0x60
> hdd: timeout waiting for DMA
> hdd: lost interrupt
>
> This chipset is:
> Bus 0, device 15, function 0:
> ISA bridge: ServerWorks CSB5 South Bridge (rev 147).
> Bus 0, device 15, function 1:
> IDE interface: ServerWorks CSB5 IDE Controller (rev 147).
> Bus 0, device 15, function 2:
> USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 5).
> on a bi-pentium III machine.
>
> With 2.4.20 and the ide1=ata66 kernel option, that setup worked great:
> # /sbin/hdparm -t /dev/hdd
> /dev/hdd:
> Timing buffered disk reads: 64 MB in 1.37 seconds = 46.72 MB/sec
> (thanks to all for such great performance (same as SCSI!))
>
> For 2.4.21, I just added the new "Generic PCI IDE Chipset Support" (no help
> provided), and recompiled, then rebooted. The 2.4.20 message:
> hdd:351651888sectors(180046 MB)w/2048KiBCache,CHS=21889/255/63,UDMA(100)
> appeared on 2.4.21 as (notice that UDMA(100) has dissapeared):
> hdd:351651888sectors(180046 MB)w/2048KiBCache,CHS=21889/255/63
>
> I then tried hdparm, which came up with only 2.5 MB/sec, then forced DMA which
> hdparm, tested again and got the errors cited at the beginning of this
> message.
>
> Please let me know if you'd like me to perform some tests, but as I can only
> reboot once or twice at lunch time.
>
> Regards,
>
> Jean-Luc
> I just upgraded from a 2.4.20 to 2.4.21 but had to revert due to the
> following errors:
> hdd: dma_timer_expiry: dma status == 0x60
> hdd: timeout waiting for DMA
> hdd: lost interrupt
I've been seeing the same problem with 2.4.21. I've attached my 2.4.21 log
(with email + firewall reports removed).
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:07.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:0a.0 USB Controller: VIA Technologies, Inc. USB (rev 04)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
hdparm /dev/hdb
/dev/hdb:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 59582/16/63, sectors = 60058656, start = 0
Ciao,
Duncan.
On Maw, 2003-06-17 at 07:39, Duncan Sands wrote:
> > I just upgraded from a 2.4.20 to 2.4.21 but had to revert due to the
> > following errors:
> > hdd: dma_timer_expiry: dma status == 0x60
> > hdd: timeout waiting for DMA
> > hdd: lost interrupt
>
> I've been seeing the same problem with 2.4.21. I've attached my 2.4.21 log
> (with email + firewall reports removed).
If its uniprocessor disable APIC support or run -ac