The patch below does the following cleanups on
drivers/scsi/seagate.{c,h}:
- remove two unused functions
- remove a function declaration for a function that is no longer present
I've tested the compilation with 2.5.72-mm2.
cu
Adrian
--- linux-2.5.72-mm2/drivers/scsi/seagate.c.old 2003-06-22 01:07:11.000000000 +0200
+++ linux-2.5.72-mm2/drivers/scsi/seagate.c 2003-06-22 01:07:30.000000000 +0200
@@ -266,20 +266,6 @@
#define WRITE_CONTROL(d) { isa_writeb((d), st0x_cr_sr); }
#define WRITE_DATA(d) { isa_writeb((d), st0x_dr); }
-static void st0x_setup (char *str, int *ints)
-{
- controller_type = SEAGATE;
- base_address = ints[1];
- irq = ints[2];
-}
-
-static void tmc8xx_setup (char *str, int *ints)
-{
- controller_type = FD;
- base_address = ints[1];
- irq = ints[2];
-}
-
#ifndef OVERRIDE
static unsigned int seagate_bases[] = {
0xc8000, 0xca000, 0xcc000,
--- linux-2.5.72-mm2/drivers/scsi/seagate.h.old 2003-06-22 01:06:20.000000000 +0200
+++ linux-2.5.72-mm2/drivers/scsi/seagate.h 2003-06-22 01:06:40.000000000 +0200
@@ -10,7 +10,6 @@
#define SEAGATE_H
static int seagate_st0x_detect(Scsi_Host_Template *);
-static int seagate_st0x_command(Scsi_Cmnd *);
static int seagate_st0x_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
static int seagate_st0x_abort(Scsi_Cmnd *);