I am getting a kernel oops with both these kernels as soon as it the
kernel loads the ide drivers (hd*)
I am using ALI1542 chipset, K6/2 500 cpu
I have tried progressively disabling various ide options (cramfs,
acls tcq etc) to no effect
I run ext3 compiled in
This is on a base of RH9 with updated modutils from rawhide.
The kernel apparrently compiles fine (no errors)
Anyone any ideas what could be the cause of this (2.5.66 worked on
this machine and runs 2.4.21 fine)
If its not a simple fix I will bugzilla it
__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
Please send dmesg with oops
(make sure you have CONFIG_KALLSYMS enabled).
--
Bartlomiej
On Mon, 14 Jul 2003, [iso-8859-1] Mike Martin wrote:
> I am getting a kernel oops with both these kernels as soon as it the
> kernel loads the ide drivers (hd*)
>
> I am using ALI1542 chipset, K6/2 500 cpu
> I have tried progressively disabling various ide options (cramfs,
> acls tcq etc) to no effect
>
> I run ext3 compiled in
>
> This is on a base of RH9 with updated modutils from rawhide.
>
> The kernel apparrently compiles fine (no errors)
>
> Anyone any ideas what could be the cause of this (2.5.66 worked on
> this machine and runs 2.4.21 fine)
>
> If its not a simple fix I will bugzilla it
--- Bartlomiej Zolnierkiewicz <[email protected]>
wrote: >
> Please send dmesg with oops
> (make sure you have CONFIG_KALLSYMS enabled).
>
I will try when I get home - though I am not too confident about it,
because the oops happens before any partitions are mounted.
> --
> Bartlomiej
>
> On Mon, 14 Jul 2003, [iso-8859-1] Mike Martin wrote:
>
> > I am getting a kernel oops with both these kernels as soon as it
> the
> > kernel loads the ide drivers (hd*)
> >
> > I am using ALI1542 chipset, K6/2 500 cpu
> > I have tried progressively disabling various ide options (cramfs,
> > acls tcq etc) to no effect
> >
> > I run ext3 compiled in
> >
> > This is on a base of RH9 with updated modutils from rawhide.
> >
> > The kernel apparrently compiles fine (no errors)
> >
> > Anyone any ideas what could be the cause of this (2.5.66 worked
> on
> > this machine and runs 2.4.21 fine)
> >
> > If its not a simple fix I will bugzilla it
>
__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
--- Bartlomiej Zolnierkiewicz <[email protected]>
wrote: >
> Please send dmesg with oops
> (make sure you have CONFIG_KALLSYMS enabled).
>
just updated to 2.6-test1 with the same result
I attach the output on the screen (written down and copied, so may be
errors)
this occurs after loading ide1
> --
> Bartlomiej
>
> On Mon, 14 Jul 2003, [iso-8859-1] Mike Martin wrote:
>
> > I am getting a kernel oops with both these kernels as soon as it
> the
> > kernel loads the ide drivers (hd*)
> >
> > I am using ALI1542 chipset, K6/2 500 cpu
> > I have tried progressively disabling various ide options (cramfs,
> > acls tcq etc) to no effect
> >
> > I run ext3 compiled in
> >
> > This is on a base of RH9 with updated modutils from rawhide.
> >
> > The kernel apparrently compiles fine (no errors)
> >
> > Anyone any ideas what could be the cause of this (2.5.66 worked
> on
> > this machine and runs 2.4.21 fine)
> >
> > If its not a simple fix I will bugzilla it
>
__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
--- Mike Martin <[email protected]> wrote: > --- Bartlomiej
Zolnierkiewicz <[email protected]>
> wrote: >
> > Please send dmesg with oops
> > (make sure you have CONFIG_KALLSYMS enabled).
> >
>
> just updated to 2.6-test1 with the same result
> I attach the output on the screen (written down and copied, so may
> be
> errors)
>
> this occurs after loading ide1
> > --
> > Bartlomiej
> >
> > On Mon, 14 Jul 2003, [iso-8859-1] Mike Martin wrote:
> >
> > > I am getting a kernel oops with both these kernels as soon as
> it
> > the
> > > kernel loads the ide drivers (hd*)
> > >
> > > I am using ALI1542 chipset, K6/2 500 cpu
> > > I have tried progressively disabling various ide options
> (cramfs,
> > > acls tcq etc) to no effect
> > >
> > > I run ext3 compiled in
> > >
> > > This is on a base of RH9 with updated modutils from rawhide.
> > >
> > > The kernel apparrently compiles fine (no errors)
> > >
> > > Anyone any ideas what could be the cause of this (2.5.66 worked
> > on
> > > this machine and runs 2.4.21 fine)
> > >
> > > If its not a simple fix I will bugzilla it
> >
>
now bugzilla'd as 938
> __________________________________________________
> Yahoo! Plus - For a better Internet experience
> http://uk.promotions.yahoo.com/yplus/yoffer.html
> ATTACHMENT part 2 application/octet-stream name=kern_oops
__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
On Mon, Jul 14, 2003 at 09:35:32PM +0100, Mike Martin wrote:
> --- Bartlomiej Zolnierkiewicz <[email protected]>
> wrote: >
> > Please send dmesg with oops
> > (make sure you have CONFIG_KALLSYMS enabled).
> >
>
> just updated to 2.6-test1 with the same result
> I attach the output on the screen (written down and copied, so may be
> errors)
what was the EIP?
--- Mike Fedyk <[email protected]> wrote: > On Mon, Jul 14, 2003
at 09:35:32PM +0100, Mike Martin wrote:
> > --- Bartlomiej Zolnierkiewicz <[email protected]>
> > wrote: >
> > > Please send dmesg with oops
> > > (make sure you have CONFIG_KALLSYMS enabled).
> > >
> >
> > just updated to 2.6-test1 with the same result
> > I attach the output on the screen (written down and copied, so
> may be
> > errors)
>
> what was the EIP?
Apart from 2.5.68 the eip cant be seen (screen scrolls past)
for 2.5.68 it is
EIP 0060:[<01b97427>] Not Tainted
EFLAGS 00010046
__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
On Thu, Jul 17, 2003 at 09:22:18AM +0100, Mike Martin wrote:
> --- Mike Fedyk <[email protected]> wrote: > On Mon, Jul 14, 2003
> at 09:35:32PM +0100, Mike Martin wrote:
> > > --- Bartlomiej Zolnierkiewicz <[email protected]>
> > > wrote: >
> > > > Please send dmesg with oops
> > > > (make sure you have CONFIG_KALLSYMS enabled).
> > > >
> > >
> > > just updated to 2.6-test1 with the same result
> > > I attach the output on the screen (written down and copied, so
> > may be
> > > errors)
> >
> > what was the EIP?
>
> Apart from 2.5.68 the eip cant be seen (screen scrolls past)
> for 2.5.68 it is
>
> EIP 0060:[<01b97427>] Not Tainted
> EFLAGS 00010046
Sorry, the numbers are machine specific, there should be a line below that
says "EIP is at ...".