I recently obtained a P4 and have started building the kernel
with SMP enabled (for hyper-threading). I have started noticing
some sortof wierd race with mounting root with an Intel ICH5 ide
controller...
Normally doing a stat("/", &buf) gives me the correct st_rdev for
my root device. But every few boots I find that st_rdev is
instead set to the st_rdev of the last IDE device under /proc/ide
that happens to be using the ide-disk driver..
Busybox has a find_real_root_device_name() function which depends
upon stat("/") giving the correct st_rdev, and this bug causes it
to do wierd things.
So for example, when booting I see this:
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA,
hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA,
hdd:DMA
hda: IC35L080AVVA07-0, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
My root_fs is on /dev/hda2.
But when running the debugger I see....
38 if (stat("/", &rootStat) != 0)
(gdb)
(gdb) p rootStat.st_rdev
$1 = 832
(gdb) p (832 >> 8) & 0xff
$2 = 3
(gdb) p 832 & 0xff
$3 = 64
Which works out to major 3, minor 64, or /dev/hdb!!!
I've attempted to track down where such a problem could
occur, but so far I've come up empty.
-Erik
--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--