I get the following OOPS when loading the snd-ice1724 module for my Envy 24HT card. Works fine if I build all the alsa code straight into the kernel.
Wil
Unable to handle kernel paging request at virtual address e4b11000
e4b11000
*pde = 1fe3a067
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<e4b11000>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: fffffff4 ebx: deb2ce14 ecx: ddc18e8c edx: deb2ce0c
esi: deb2c018 edi: df19d04f ebp: dd993e74 esp: dd993e54
ds: 007b es: 007b ss: 0068
Stack: e4b0500a deb2ce14 e4b056c0 e4b05760 deb2c018 e4b2cd60 e4b05880 e4b2979d
dd993eb4 e4b04e8e deb2c018 c15e0800 dd993ea4 00000000 00000000 dd993eac
c017a8a2 dd993e9c df19d038 df19d014 deb2c018 e4b2cd60 ffffffed c15e0800
Call Trace:
[<e4b0500a>] revo_init+0x8a/0x130 [snd_ice1724]
[<e4b04e8e>] snd_vt1724_probe+0x28e/0x2c0 [snd_ice1724]
[<c017a8a2>] sysfs_new_inode+0x62/0xb0
[<c01d242b>] pci_device_probe_static+0x4b/0x60
[<c01d258c>] __pci_device_probe+0x3c/0x50
[<c01d25cf>] pci_device_probe+0x2f/0x50
[<c0207413>] bus_match+0x43/0x70
[<c020751d>] driver_attach+0x5d/0x70
[<c02077af>] bus_add_driver+0x8f/0xb0
[<c0207c11>] driver_register+0x31/0x40
[<c01d289f>] pci_register_driver+0x6f/0xa0
[<e4b04ed5>] alsa_card_ice1724_init+0x15/0x50 [snd_ice1724]
[<c012ecd8>] sys_init_module+0x108/0x220
[<c010923f>] syscall_call+0x7/0xb
Code: Bad EIP value.
>>EIP; e4b11000 <__crc_d_find_alias+9699e/32742c> <=====
>>eax; fffffff4 <__kernel_rt_sigreturn+1bb4/????>
>>ebx; deb2ce14 <__crc_totalram_pages+1f6d5a/218da2>
>>ecx; ddc18e8c <__crc_ide_build_dmatable+151146/6d7e01>
>>edx; deb2ce0c <__crc_totalram_pages+1f6d52/218da2>
>>esi; deb2c018 <__crc_totalram_pages+1f5f5e/218da2>
>>edi; df19d04f <__crc_pci_dev_driver+166363/34a945>
>>ebp; dd993e74 <__crc_notify_parent+68ab4/19c986>
>>esp; dd993e54 <__crc_notify_parent+68a94/19c986>
Trace; e4b0500a <__crc_d_find_alias+8a9a8/32742c>
Trace; e4b04e8e <__crc_d_find_alias+8a82c/32742c>
Trace; c017a8a2 <sysfs_new_inode+62/b0>
Trace; c01d242b <pci_device_probe_static+4b/60>
Trace; c01d258c <__pci_device_probe+3c/50>
Trace; c01d25cf <pci_device_probe+2f/50>
Trace; c0207413 <bus_match+43/70>
Trace; c020751d <driver_attach+5d/70>
Trace; c02077af <bus_add_driver+8f/b0>
Trace; c0207c11 <driver_register+31/40>
Trace; c01d289f <pci_register_driver+6f/a0>
Trace; e4b04ed5 <__crc_d_find_alias+8a873/32742c>
Trace; c012ecd8 <sys_init_module+108/220>
Trace; c010923f <syscall_call+7/b>
Linux darwin.goathorde.org 2.6.0-test1 #1 Mon Jul 14 12:49:48 EDT 2003 i686 GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.34-WIP
xfsprogs 2.5.3
quota-tools 3.09.
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.9
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded snd_ice1724 snd_ice17xx_ak4xxx snd_ac97_codec snd_pcm snd_page_alloc snd_timer snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd soundcore nls_iso8859_1 nls_cp437 dm_mod w83781d i2c_sensor i2c_core
00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=32]
Capabilities: <available only to root>
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at dd083000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 4
Region 0: Memory at dd081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 3
Region 0: Memory at dd082000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <available only to root>
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: nVidia Corporation: Unknown device 4144
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at d000 [size=128]
Region 2: Memory at dd084000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: db000000-dcffffff
Prefetchable memory behind bridge: d8000000-d8ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: <available only to root>
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d9000000-daffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:07.0 Multimedia audio controller: IC Ensemble Inc ICE1724 [Envy24HT] (rev 01)
Subsystem: IC Ensemble Inc: Unknown device 3630
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9000 [size=32]
Region 1: I/O ports at 9400 [size=128]
Capabilities: <available only to root>
01:08.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
Subsystem: Netgear: Unknown device 4105
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
01:09.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc.: Unknown device 4d68
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9800 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: <available only to root>
01:0b.0 RAID bus controller: Triones Technologies, Inc. HPT372A (rev 02)
Subsystem: Triones Technologies, Inc.: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at b400 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at bc00 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd R250 If [Radeon 9000 Pro "Evil Commando"]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at da000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01)
Subsystem: C.P. Technology Co. Ltd: Unknown device 2038
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at d4000000 (32-bit, prefetchable) [disabled] [size=64M]
Region 1: Memory at da010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <available only to root>
At Wed, 16 Jul 2003 11:51:56 -0400,
Wil Reichert wrote:
>
> I get the following OOPS when loading the snd-ice1724 module for my Envy 24HT card. Works fine if I build all the alsa code straight into the kernel.
>
does the attached patch fix the problem?
--
Takashi Iwai <[email protected]> SuSE Linux AG - http://www.suse.de
ALSA Developer ALSA Project - http://www.alsa-project.org
Yes, the module loads fine now.
I have a couple of questions regarding this card (M-Audio Revolution 7.1) and ALSA if you'll humour me.
A) Does the driver support more than 2 channels of sound? I've had no luck getting output out of anything but the analog front channel.
B) Instead of the typical <Master> <PCM> <Line> etc channels in alsamixer I have DAC[1-7], with the front left & right channel being <DAC> and <DAC1>. Is this normal?
C) mplayer (http://www.mplayerhq.hu) compiled with alsa support will detect the card but fails a snd_pcm_hw_params_set_format call. It will work fine via OSS emulation however. The same build of mplayer works fine via alsa with other cards, tho. Is this a driver problem, a hardware limitation, or a problem in mplayer?
Thanks.
Wil
On Thu, 17 Jul 2003 11:45:26 +0200
Takashi Iwai <[email protected]> wrote:
> At Wed, 16 Jul 2003 11:51:56 -0400,
> Wil Reichert wrote:
> >
> > I get the following OOPS when loading the snd-ice1724 module for my Envy 24HT card. Works fine if I build all the alsa code straight into the kernel.
> >
>
> does the attached patch fix the problem?
>
> --
> Takashi Iwai <[email protected]> SuSE Linux AG - http://www.suse.de
> ALSA Developer ALSA Project - http://www.alsa-project.org
>
At Thu, 17 Jul 2003 07:25:36 -0400,
Wil Reichert wrote:
>
> Yes, the module loads fine now.
>
> I have a couple of questions regarding this card (M-Audio Revolution 7.1) and ALSA if you'll humour me.
>
> A) Does the driver support more than 2 channels of sound?
yes. you'll need to raise the DAC volumes.
> I've had no luck getting output out of anything but the analog front channel.
what program did you use?
if you want to duplicate signals to surround ,etc., you can configure
it in your ~/.asoundrc file. (only for ALSA apps, though.)
we don't do signal duplication in kernel.
> B) Instead of the typical <Master> <PCM> <Line> etc channels in alsamixer I have DAC[1-7], with the front left & right channel being <DAC> and <DAC1>. Is this normal?
yes. it's not a typical consumer card.
if you have 6 or 8 channels, which should be called "Master"? :)
> C) mplayer (http://www.mplayerhq.hu) compiled with alsa support will detect the card but fails a snd_pcm_hw_params_set_format call. It will work fine via OSS emulation however. The same build of mplayer works fine via alsa with other cards, tho. Is this a driver problem, a hardware limitation, or a problem in mplayer?
the problem of application. the application should use plug (or
other) plugin to convert the sample format on user-space.
--
Takashi Iwai <[email protected]> SuSE Linux AG - http://www.suse.de
ALSA Developer ALSA Project - http://www.alsa-project.org