Hi,
Wanted to try out 2.6.0-test1-mm1 but no luck.
The kernel doesn't boot. Right after saying "Ok, booting kernel..."
it hangs and only hardware reset helps at this point. And yes, I have
CONFIG_VT_CONSOLE. When vesafb was compiled in it seemed to switch
screen resolution before hang (vga=791).
2.4 boots like a charm.
It's a KT133A motherboard with 1GB of RAM and 1200MHz AMD CPU.
I'll attach my .config.
Any help is appreciated.
Lenar
On Tue, Jul 22, 2003 at 09:39:08AM +0300, Lenar L?hmus wrote:
> Hi,
> Wanted to try out 2.6.0-test1-mm1 but no luck.
> The kernel doesn't boot. Right after saying "Ok, booting kernel..."
> it hangs and only hardware reset helps at this point. And yes, I have
> CONFIG_VT_CONSOLE. When vesafb was compiled in it seemed to switch
> screen resolution before hang (vga=791).
> 2.4 boots like a charm.
> It's a KT133A motherboard with 1GB of RAM and 1200MHz AMD CPU.
> I'll attach my .config.
> Any help is appreciated.
> Lenar
I'll try to track some vendor hackers more in tune with the issues of
this model. If I can rule out known issues I'll start looking deeper.
-- wli
On Tue, 22 Jul 2003, Lenar [iso-8859-15] L?hmus wrote:
> Hi,
>
> Wanted to try out 2.6.0-test1-mm1 but no luck.
>
> The kernel doesn't boot. Right after saying "Ok, booting kernel..."
> it hangs and only hardware reset helps at this point. And yes, I have
> CONFIG_VT_CONSOLE. When vesafb was compiled in it seemed to switch
> screen resolution before hang (vga=791).
Missing some config options (you need CONFIG_VGA_CONSOLE), hopefully the
defaults will get a bit more sane...
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
Zwane
--
function.linuxpower.ca