Hi,
I'm using 2.5.74 kernel, hotplug-2003_05_01-3 and pcmcia-cs-3.2.3-1.
Now after putting pcmcia card into slot new interface arrives (eth1)
and cards works quite well.
Jul 12 11:21:54 mobarm Linux Kernel Card Services 3.1.22
Jul 12 11:21:54 mobarm options: [pci] [cardbus] [pm]
Jul 12 11:21:54 mobarm Yenta IRQ list 0800, PCI irq5
Jul 12 11:21:54 mobarm Socket status: 30000411
Jul 12 11:21:54 mobarm cs: IO port probe 0x0c00-0x0cff: clean.
Jul 12 11:21:54 mobarm cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x87f
Jul 12 11:21:54 mobarm cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x3f8-
0x40f 0x4d0-0x4d7
Jul 12 11:21:54 mobarm cs: IO port probe 0x0a00-0x0aff: clean.
Jul 12 11:21:54 mobarm cs: memory probe 0xa0000000-0xa0ffffff: clean.
Jul 12 11:21:54 mobarm orinoco.c 0.13e (David Gibson <[email protected]> and others)
Jul 12 11:21:54 mobarm orinoco_cs.c 0.13e (David Gibson <[email protected]> and other
s)
Jul 12 11:21:54 mobarm eth1: Station identity 001f:0001:0008:000a
Jul 12 11:21:54 mobarm eth1: Looks like a Lucent/Agere firmware version 8.10
Jul 12 11:21:54 mobarm eth1: Ad-hoc demo mode supported
Jul 12 11:21:54 mobarm eth1: IEEE standard IBSS ad-hoc mode supported
Jul 12 11:21:54 mobarm eth1: WEP supported, 104-bit key
Jul 12 11:21:54 mobarm eth1: MAC address 00:02:2D:4A:FE:4C
Jul 12 11:21:54 mobarm eth1: Station name "HERMES I"
Jul 12 11:21:54 mobarm eth1: ready
Jul 12 11:21:54 mobarm eth1: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x013f
Unfortunately after getting it out of slot interface eth1 disappears
but I get:
Jul 12 11:22:50 mobarm orinoco_lock() called with hw_unavailable (dev=cbae5800)
Jul 12 11:23:00 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
Jul 12 11:23:10 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
Jul 12 11:23:20 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
Jul 12 11:23:31 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
[..]
Putting card back into slot doesn't cause any effect. I need to reboot
to get it working again.
--
Arkadiusz Mi?kiewicz CS at FoE, Wroclaw University of Technology
arekmatssedotpl AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux
On Sat, Jul 12, 2003 at 12:46:11PM +0200, Arkadiusz Miskiewicz wrote:
> Hi,
>
> I'm using 2.5.74 kernel, hotplug-2003_05_01-3 and pcmcia-cs-3.2.3-1.
Are you using the in-kernel PCMCIA controller drivers, or the ones
from the pcmcia-cs package?
With the in-kernel drivers I'm unable to reproduce this on 2.5.75.
> Now after putting pcmcia card into slot new interface arrives (eth1)
> and cards works quite well.
>
> Jul 12 11:21:54 mobarm Linux Kernel Card Services 3.1.22
> Jul 12 11:21:54 mobarm options: [pci] [cardbus] [pm]
> Jul 12 11:21:54 mobarm Yenta IRQ list 0800, PCI irq5
> Jul 12 11:21:54 mobarm Socket status: 30000411
> Jul 12 11:21:54 mobarm cs: IO port probe 0x0c00-0x0cff: clean.
> Jul 12 11:21:54 mobarm cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x87f
> Jul 12 11:21:54 mobarm cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x3f8-
> 0x40f 0x4d0-0x4d7
> Jul 12 11:21:54 mobarm cs: IO port probe 0x0a00-0x0aff: clean.
> Jul 12 11:21:54 mobarm cs: memory probe 0xa0000000-0xa0ffffff: clean.
> Jul 12 11:21:54 mobarm orinoco.c 0.13e (David Gibson <[email protected]> and others)
> Jul 12 11:21:54 mobarm orinoco_cs.c 0.13e (David Gibson <[email protected]> and other
> s)
> Jul 12 11:21:54 mobarm eth1: Station identity 001f:0001:0008:000a
> Jul 12 11:21:54 mobarm eth1: Looks like a Lucent/Agere firmware version 8.10
> Jul 12 11:21:54 mobarm eth1: Ad-hoc demo mode supported
> Jul 12 11:21:54 mobarm eth1: IEEE standard IBSS ad-hoc mode supported
> Jul 12 11:21:54 mobarm eth1: WEP supported, 104-bit key
> Jul 12 11:21:54 mobarm eth1: MAC address 00:02:2D:4A:FE:4C
> Jul 12 11:21:54 mobarm eth1: Station name "HERMES I"
> Jul 12 11:21:54 mobarm eth1: ready
> Jul 12 11:21:54 mobarm eth1: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x013f
>
> Unfortunately after getting it out of slot interface eth1 disappears
> but I get:
> Jul 12 11:22:50 mobarm orinoco_lock() called with hw_unavailable (dev=cbae5800)
> Jul 12 11:23:00 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
> Jul 12 11:23:10 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
> Jul 12 11:23:20 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
> Jul 12 11:23:31 mobarm unregister_netdevice: waiting for eth1 to become free. Usage count = 1
> [..]
>
> Putting card back into slot doesn't cause any effect. I need to reboot
> to get it working again.
>
>
--
David Gibson | For every complex problem there is a
[email protected] | solution which is simple, neat and
| wrong.
http://www.ozlabs.org/people/dgibson